Tetraaryl-methane analogues in group 14—V. Distortion of tetrahedral geometryin terms of through-space π–π and π–σ interactions andNMR sagging in terms of π–σcharge transfer

44 members of thecompound series Ph_4−nMR_n (M=Si, Ge, Sn, Pb; R=o-, m-, p-Tol; n=0–4) were synthesized (15 newcompounds). The crystal structures of Ph₃Sn (o-Tol) and PhSn (o-Tol)₃ were determined and compared to 16 known structures. Subject to the distanced (M–C), an interplay between through-space π–π repulsion and π–σ attraction leads to either elongated or compressed tetrahedral geometry. ²⁹ Si-, ¹¹⁹ Sn- and ²⁰⁷ Pb-NMR chemical shifts were determined in solution and in the solid state. ⁷³ Ge chemical shifts were measured only in solution. Anupfield or downfield sagging of the chemical shifts along each series is rationalized in terms of a π–σcharge transfer which is constrained by torsion of the aromatic groups.     

Determination of Lead, Chromium, Manganese and Zinc in Slurries of Botanical and Biological Samples by Electrothermal Atomic Absorption Spectrometry Using Tungsten-Containing Chemical Modifiers

Lead, Cr, Mn and Zn in slurries of botanic and biological samples were determined by electrothermal atomic absorption spectrometry (ETAAS) using W, Ir, NH₄H₂PO₄, W and NH₄H₂PO₄, Ir and NH₄H₂PO₄, W and Ir, and W + Ir + NH₄H₂PO₄ chemical modifiers in an 0.2% (v/v) Triton X-100 plus 0.2% (v/v) nitric acid mixture. Zeeman effect background correction was performed and platforms inserted into graphite tubes were used. Comprehensive comparative studies were carried out with respect to pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations in the presence and absence of modifiers. The mixture of W + Ir + NH₄H₂PO₄ was found to be preferable for the determination of Pb, Cr, Mn and Zn in slurry samples. The pyrolysis temperatures of the analytes were increased up to 1250 °C for Pb, 1000 °C for Zn, 1400 °C for Cr and Mn by using W + Ir + NH₄H₂PO₄ with an 0.2% (v/v) Triton X-100 plus 0.2% (v/v) nitric acid mixture used as diluent solution. The optimum masses of the mixed modifier components were found to be 20 µg W + 4 µg Ir + 50 µg NH₄H₂PO₄. The characteristic masses of Pb, Cr, Mn and Zn obtained are 16.3, 5.6, 0.1 and 1.1 pg, respectively. The detection limits of Pb, Cr, Mn and Zn based on integrated absorbance for 0.5% (m v⁻¹) slurries were found to be 0.14, 0.06, 0.02 and 0.01 µg g⁻¹, respectively. The slurries of botanic and biological certified and standard reference materials were analyzed with and without the modifiers. Depending on the sample type, the percent recoveries increased from 63 up to 104% for analytes when using the proposed modifier mixture.     

DNA电化学生物传感器测定水中痕量铅

采用物理涂附法将单链DNA固定到金表面得到ssDNA/Au修饰电极。研究表明,该电极在pH 5,0.2 mol/L NaAc-HAc缓冲底液中,可用于测定水中痕量Pb2 。Pb2 以Pb-DNA络合物的形式吸附在电极上,以示差脉冲伏安法测定Pb2 ,在0.15 V(vsSCE)处有灵敏的氧化峰,其峰电流与Pb2 浓度在5.0×10-8~1.0×10-6mol/L范围内呈良好的线性关系,此法的检测限为2.0×10-8mol/L,该修饰电极的稳定性和抗干扰性都较好。用该电极对饮用水中的Pb进行检测,得到了满意的结果。     

Parallel iterative solution-phase synthesis of 5-amino-1-aryl-[1,2,4]triazolo[1,5-a]pyridine-7-carboxylic acid amide derivatives

The parallel iterative solution-phase synthesis of 5-amino-1-aryl-[1,2,4]triazolo[1,5-a]pyridine-7-carboxylic acid amide derivatives is described. The key intermediate 2,6-bis-aminopyridine-4-carboxylic acid methyl ester was synthesised in a two step procedure in 64% overall yield and elaborated to a variety of triazolopyridine-5-carboxylic acid methyl ester by selective pyridine-N-amination, condensation of the adduct with a wide selection of aldehydes and subsequent cyclisation and oxidation. The desired esters were obtained in yields up to 70%. The final transformation to the amide derivatives was accomplished by application of carefully optimised reaction conditions thus giving access to a library of total 500 triazolopyridine amide derivatives. Iterative synthetic cycles (12-48 library members each) allowing for maximal flexibility in chemistry and maximal efficiency in in vitro biological activity optimisation guided by molecular modelling efforts constitute a synergistic procedure for rapid lead optimisation.     

An investigation of glasses for capillary chromatography

An investigation was conducted of various glasses, other than soda lime or borosilicate, for use in glass capillary gas chromatography. The work has uncovered some unique chromatographic qualities in the use of potash soda lead and fused silica glasses as materials for making glass capillary columns. The fused silica proved to be an ideal material for capillary column construction, being inherently more inert than glass containing metal oxides. It has been shown that through the use of thin wall capillary tubing of high flexibility many of the mechanical problems associated with glass capillary columns, such as fragility and column straightening, can be avoided.     

Preparation of sinapinaldehyde modified mesoporous silica materials and their application in selective extraction of trace Pb(II)

A new solid phase extractant, sinapinaldehyde (SA) modified SBA-15 mesoporous silica, was developed for selective extraction and preconcentration of trace Pb(II) from aqueous solutions. The successful immobilization of SA on SBA-15 and the strong interaction between SA-SBA-15 and Pb(II) were characterized and confirmed by FTIR spectroscopy and scanning electron microscopy. Parameters such as solution pH, shaking time, eluent condition and sample volume were optimized so that the maximum removal of Pb(II) from solution could be achieved. At pH 4.0, the maximum adsorption capacity of the sorbent for Pb(II) was found to be 33.6?mg?g^?1 and the adsorbed Pb(II) could be completely eluted using a mixed solution of 2?M HCl and 5% CS(NH₂)₂. Some common metal ions such as K(I), Na(I), Mg(II), Ca(II), Cr(III), Fe(III), Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Hg(II) did not interfere with the adsorption of trace Pb(II). The detection limit of the present method was found to be 1.3?ng?mL^?1 and the relative standard deviation was less than 2.0% (n?=?8). These results suggested that this new sorbent is very efficient and selective for the removal of trace Pb(II) in water samples.     

Artifacts in the Determination of Trace Metal Binding Forms in Anoxic Sediments by Sequential Extraction

Abstract

The binding forms of Co, Cd, Cu, Pb, and Zn in an anoxic, sulfide-bearing sediment were investigated by performing both thermodynamic equilibrium calculations and sequential extractions. Care was taken to maintain oxygen-free conditions during the whole experiment. The calculations suggested that trace metals were bound to sulfidic minerals. Sequential extraction results, however, showed increased importance of exchangeable and reducible fractions in the order Cu < Cd < Pb < Zn < Co. Thermodynamic equilibrium calculations of the chemical reactions during extraction showed that Cd, Co, Pb, and Zn sulfides are to a significant extent soluble in the acetate-exchangeable (step 1 + 2) and oxalate-reducible (step 3) fractions. Neglecting the dissolution of sulfide minerals would lead to a misinterpretation of the experimental results.     

Trifluoroethylxanthate as an Analytical Reagent: AAS of Zinc,Antimony and Lead After Coprecipitation of Their Trifluoroethylxanthates onto Microcyrstalline Naphthalene

Abstract

A sensitive method has been developed for the direct atomic absorption spectrometric determination of zinc, antimony and lead after coprecipitation of their trifluoroethylxanthates onto microcrystalline naphthalene. The metal xanthates are quantitatively coprecipitated over the pH ranges: Zn, 5.9–8.4; Sb, 4.0–6.0 and Pb, 4.0–11.0. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF. This solution is aspirated into an air-acetylene flame at 213.9, 217.6 and 217.0nm for Zn, Sb and Pb, respectively. Beer's law is obeyed in the concentration range 2–50, 3–90 and 5–60 μg of Zn, Sb and Pb, respectively in 10ml of the final DMF solution. RSDs are at the ± (0.5–0.6)% level (n=10). The concentration for 1% absorption is 0.019, 0.035 and 0.060μg/ml for Zn, Sb and Pb, respectively. The method is suitable for the preconcentration of the metals from a larger volume of the aqueous phase, and has been employed for their determination in standard reference materials. It may be employed for the simultaneous determination of Zn, Pb and Sb in a solution by pH control.     

Effect of corona discharge on cadmium sulphide and lead sulphide films

This paper describes the effect of corona discharge on cadmium sulphide (CdS) and lead sulphide (PbS) films prepared using the chemical route. The property of films before and after exposure to corona has been described in detail. The electronic properties of the CdS and PbS films have been studied by current-voltage (I-V), capacitance-voltage (C-V) measurements. The structural properties and surface morphology were studied by using X-ray diffraction and scanning electron microscopy before and after exposing to Corona discharge. The films displayed the change in surface morphology after exposure to the corona discharge. It has been found that the films showed an increase in resistivity after exposure. This change in property has been attributed to modification in surface states. Time-dependent recovery indicated that room temperature annealing is sufficient to regain the normal resistivity of the films. The experiment was carried with the aim of studying the effect of the interaction of corona discharge on the semiconductor films and its subsequent effects.