Quantification of several atmospheric gases from high resolution infrared solar spectra obtained at the south pole in 1980 and 1986

Simultaneous total column amounts of a number of minor and trace atmospheric gases above the South Pole in December 1980 and December 1986 have been deduced from analysis of high resolution solar absorption spectra recorded (by F. J. M. and F. H. M.) from Amundsen-Scott South Pole Station. These spectra also contain some limited information on the vertical profiles of the observed atmospheric gases.The data sets were recorded with a Bomem Michelson-type interferometer and analyzed with a spectral least-squares fitting procedure, utilizing the best available spectroscopic line parameters and absorption cross sections. Because the same instrument, line parameters, and analysis method have been used in analyzing the December 1980 and December 1986 data sets, the precision in comparing the column amounts from these two dates is rather high, about 10–20% for the stronger absorbing gases. For this reason, it has been possible to quantify or determine upper limits for differences between the December 1980 and December 1986 total column amounts, of a number of atmospheric gases including O₃, N₂O, HNO₃, CO₂, CH₄, and CF₂C_{1 2} (CFC 12). In addition, vertical column amounts for a number of atmospheric gases covered only in the December 1986 observations have been derived, including HC1, NO, NO₂, and C₂H₆. Some of these results will be discussed here. The HC1 measurements are especially interesting since the observed amounts are higher than expected from observations made at lower latitudes in the northern and southern hemispheres.     

Thermal analytical and infrared spectroscopic investigations on polymorphic organic compounds-II

At room temperature, three of the six polymorphic compounds described are not present in their highest melting-point form, owing to enantiotropy. These three are triphenyltin chloride (3 modifications), 1-(4,4-dimethyl-2-oxo-3-tetrahydrofuryl)thiourea (4 modifications), and 2-aminoethyl diphenylborinate (3 modifications). In the case of 4-amino-1-(2-phenylethyl)-1,2,4-triazoline-5-thione, in addition to the absolutely stable modificationI, a further six unstable crystal forms have been observed. The three modifications of,-dimethyl-[1,1-biphenyl]-4-methanol are also monotropic in character. 2,9-Dimethyl-1,10-phenanthroline, the three polymorphic forms of which are unstable, is a special case, since it absorbs water from the air and changes into a semi-hydrate.     

An improved microwave plasma torch for atomic spectrometry

The analytical performance of a microwave plasma torch was improved through mechanical alterations. Several problems reported in earlier designs were addressed: the ignition and stabilization of a helium plasma in the MPT was difficult; high powers were required to both ignite and operate the plasma; otherwise, the plasma would erratically change from an annular to a filament type discharge. In the new torch, the helium discharge was stabilized by replacing the copper central tube with one made of quartz. In addition, air entrainment was alleviated through use of a sheathing gas. This modification simplified the background mass spectrum and raised the effective ionization temperature of the discharge. A detailed schematic diagram of the new microwave plasma torch is presented.     

Poly(ethylene-oxide)-para-disubstituted benzene intercalates. Molecular conformation of the polymer molecule from far infrared spectra

The far infrared spectra of various poly(ethylene oxide)-para-disubstituted benzene intercalates are reported. From a detailed discussion, it is strongly suggested that the formula of these intercalates is either [(p-C₆H₄XY)₃(CH₂CH₂O–)₁₀] _n (for XY=ClCl, BrBr, BrCl, ICl, ClF and CH₃Br) or [(p-C₆H₄XY)₂(CH₂CH₂O)₇] _n (for XY=BrF and IF). In both cases the conformation of the polymer molecule is nearly TTG. In addition the previously described relative disposition of the host and guest molecules is confirmed.     

Investigation of the phosphinyl analog of α-ketoglutaric acid

It was shown by³¹P and¹³C NMR spectroscopy that methyl(3-carboxy-3-oxopropyl)phosphinic acid (4-methylhydroxyphosphinyl-2-oxobutyric acid) (1) and the amide (2) of the latter exist in keto forms in non-aqueous solutions. In aqueous solutions an equilibrium between the keto,gem-diol, and enol forms has been observed. The proportions of the diol and enol forms increase as the acidity of the media increases. Silylation of acid 1 with hexamethyldisilazane gives the tris(trimethylsilyl) derivative of enol form (3) (Z- andE-isomers).Translated fromIzyestiya Akadetnii Nauk. Seriya Khimicheskaya, No. 1, pp. 125–128, January, 1994.     

FeZSM－5沸石上乙苯的吸附态及氧化脱氢

ＦｅＺＳＭ－５吸附乙苯前后的ＩＲ、ＸＰＳ、ＥＳＲ及Ｍｏｓｓｂａｕｅｒ谱表明，乙苯分子的侧链和苯环与ＦｅＺＳＭ－５的活性位（以Ｆｅ为中心的结构单元）同时发生配位络合作用，减弱了乙苯分子侧链的α和β位Ｃ－Ｈ键，使其活化，在氧存在下易发生氧化脱氢反应生成苯乙烯．Ｆｅ（Ⅲ）是乙苯氧化脱氢的活性中心，尤其是骨架不饱和配位的Ｆｅ（Ⅲ）对活化乙苯分子起到了关键作用，碱金属平衡阳离子起到了助催化剂的作用．骨架Ｆｅ（Ⅲ）比非骨架Ｆｅ（Ⅲ）具有更高的氧化脱氢活性     

A vibrational spectroscopic study of the adsorption of 4,4′-bipyridyl by sepiolite and smectite group clay minerals from Anatolia (Turkey)

The adsorption of 4,4-bipyridyl by natural sepiolite and smectite group clay minerals (bentonite, hectorite and saponite) from Anatolia (Turkey) has been studied using vibrational spectroscopy. Investigation of Fourier-transform infrared and Fourier-transform Raman spectra of adsorbed 4,4-bipyridyl indicate the presence of chemisorbed species. However, any evidence for the generation of anionic species on the surface of the phyllosilicates has not been detected. It is proposed that the adsorbed bipyridyl molecules on sepiolite are centrosymmetric and H-bonded to the surface hydroxyls through both the nitrogen lone pairs as bidentate ligands. The adsorbed bipyridyl molecules on the smectite group clays are coordinated to exchangeable cations both directly and also indirectly through water as monodentate ligands. XRD patterns of the clays studied are also recorded.     

Temperature and humidity aging of poly(p-phenylene-2,6-benzobisoxazole) fibers: Chemical and physical characterization

In recent years, poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers have become prominent in high strength applications such as body armor, ropes and cables, and recreational equipment. The objectives of this study were to expose woven PBO body armor panels to elevated temperature and moisture, and to analyze the chemical, morphological and mechanical changes in PBO yarns extracted from the panels. A 30% decrease in yarn tensile strength, which was correlated to changes in the infrared peak absorbance of key functional groups in the PBO structure, was observed during the 26 week elevated temperature/elevated moisture aging period. Substantial changes in chemical structure were observed via infrared spectroscopy, as well as changes in polymer morphology using microscopy and neutron scattering. When the panels were removed to an ultra-dry environment for storage for 47 weeks, no further decreases in tensile strength degradation were observed. In a follow-on study, fibers were sealed in argon-filled glass tubes and exposed to elevated temperature; less than a 4% decrease in tensile strength was observed after 30 weeks, demonstrating that moisture is a key factor in the degradation of these fibers.     

Methyl abstraction kinetics of CpFe(CO)2Me using the benzyl radical clock

The rate constant for the methyl abstraction reaction of CpFe(CO)₂Me has been measured with the benzyl radical clock as (1.1 ± 0.2) × 10⁵ M⁻¹ s⁻¹ at room temperature. Time-resolved Fourier-transform Infrared (FTIR) absorption spectroscopy pointed towards the formation of the CpFe(CO)₂ radical upon benzyl abstraction. The main stable product has been established by a linear scan of the reaction mixture as Cp₂Fe₂(CO)₄ produced by the dimerization of the CpFe(CO)₂ radicals. The transition state structure for the abstraction process was also found at UB3LYP/6-311+G* level of theory to contain a planar CH₃ group.     

Hole doping and superconductivity characteristics of the s=1, 2 and 3 members of the (Cu,Mo)-12s2 homologous series of layered copper oxides

Superconductivity characteristics have been systematically evaluated for a two-CuO₂-plane copper oxide system, (Cu,Mo)-12s2, upon increasing the number of fluorite-structured layers, s, between the two CuO₂ planes. Essentially single-phase samples of (Cu_0.75Mo_0.25)Sr₂YCu₂O_7+δ (s=1), (Cu_0.75Mo_0.25)Sr₂(Ce_0.45Y_0.55)₂Cu₂O_9+δ (s=2) and (Cu_0.75Mo_0.25)Sr₂(Ce_0.67Y_0.33)₃Cu₂O_11+δ (s=3) were synthesized through a conventional solid-state route in air. To make the samples superconductive an additional high-pressure oxygenation (HPO) treatment was required. Such treatment (carried out at 5 GPa and 500 °C in the presence of 75 mol% Ag₂O₂ as an oxygen source to maximize the T_c) compressed the crystal lattice for the three members of the (Cu_0.75Mo_0.25)-12s2 series equally, i.e., by 0.01 Å for the a parameter and by 0.07 Å for the c parameter per formula unit. From both Cu L-edge and O K-edge XANES spectra the s=1 sample was found to possess the highest overall hole-doping level among the HPO samples. Accordingly it exhibited the best superconductivity characteristics. With increasing s, both the T_c (s=1: 88 K, s=2: 61 K, s=3: 53 K) and H_irr values got depressed, being well explained by the trend of decreasing CuO₂-plane hole concentration with increasing s as revealed from O K-edge XANES spectra for the same samples. Hence, the present results do not suggest any significant (negative) impact on the superconductivity characteristics from the gradually thickened fluorite-structured block itself.