Kinetic features of ethylene polymerization over supported catalysts [2,6‐bis(imino)pyridyl iron dichloride/magnesium dichloride] with AlR3 as an activator

The effects of polymerization temperature, polymerization time, ethylene and hydrogen concentration, and effect of comonomers (hexene‐1, propylene) on the activity of supported catalyst of composition LFeCl₂/MgCl₂‐Al(i‐Bu)₃ (L = 2,6‐bis[1‐(2,6‐dimethylphenylimino)ethyl] pyridyl) and polymer characteristics (molecular weight (MW), molecular‐weight distribution (MWD), molecular structure) have been studied. Effective activation energy of ethylene polymerization over LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a value typical of supported Ziegler–Natta catalysts (11.9 kcal/mol). The polymerization reaction is of the first order with respect to monomer at the ethylene concentration >0.2 mol/L. Addition of small amounts of hydrogen (9–17%) significantly increases the activity; however, further increase in hydrogen concentration decreases the activity. The IRS and DSC analysis of PE indicates that catalyst LFeCl₂/MgCl₂‐Al(i‐Bu)₃ has a very low copolymerizing ability toward propylene and hexene‐1. MW and MWD of PE produced over these catalysts depend on the polymerization time, ethylene and hexene‐1 concentration. The activation effect of hydrogen and other kinetic features of ethylene polymerization over supported catalysts based on the Fe (II) complexes are discussed. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5057–5066, 2007     

A Distributional Approach to Multiple Stochastic Integrals and Transformations of the Poisson Measure

We study a class of ‘nonpoissonian’ transformations of the configuration space and the corresponding transformations of the Poisson measure. For some class of Poisson measures we find conditions which are sufficient for the transformed measure (which in general is nonpoissonian) to be absolutely continuous with respect to the initial Poisson measure and get the expression for the corresponding Radon–Nikodym derivative. To solve this problem we use a distributional approach to Poisson multiple stochastic integrals.     

<Emphasis Type="Italic">Comment on</Emphasis>¶Low temperature specific heat of blue bronze K <Emphasis Type="Bold">0.30</Emphasis>MoO <Emphasis Type="Bold">3</Emphasis>, by J. Odin,J.C. Lasjaunias,K. Biljaković, K. Hasselbach,and P. Monceau

Eur. Phys. J. B 24, 315 (2001) Here we comment on a recently published paper on the presence of a phason contribution in the low temperature heat capacity data of the charge-density-wave compounds K_0.3MoO₃ and (TaSe₄)₂I. We have shown that the anomaly in the C _P / T ³ data reported by Odin et al. is straightforwardly interpreted in terms of low energy phonon modes resulting from the peculiar topology of these compounds. Received 21 February 2002 Published online 19 July 2002     

磁控溅射ZnO薄膜的成核机制及表面形貌演化动力学研究

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si(100)和Si(111)基片上的表面形貌 随沉积时间的演化. 通过对薄膜生长形貌的动力学标度表征，研究了射频反应磁控溅射条件 下，ZnO薄膜的成核过程及生长动力学行为. 研究发现，ZnO在基片表面的成核过程可分为初 期成核阶段、低速率成核阶段和二次成核阶段. 对于Si(100)基片，三个成核阶段的生长指 数分别为β₁=1.04，β₂=0.25±0.01，β₃=0.74；对 于Si(11 关键词： ZnO薄膜 磁控溅射 生长动力学 成核机制     

Growth kinetics of iron boride layers: Dimensional analysis

Dimensional analysis is presented as a powerful tool in the study of the paste boriding process. In particular, a dimensional method is used to study the growth kinetics of the boride layers FeB and Fe₂B. Experiments were performed in AISI 1045 steel and AISI M2 steel, to test the suggested model. Samples of 1045 steel were prepared and treated using boron paste thickness of 3-5 mm, at temperatures of 1193, 1223 and 1273 K, with 2, 4 and 6 h of treatment time. The M2 specimens had boron paste thickness of 3 and 4 mm and temperatures of 1223, 1253 and 1273 K for 2 and 6 h. Results indicate that the growth of boron layers obeys power laws of the form y = αx^β, where α and β constants are a function of the material and the interface of interest. Validation of the model was carried out using experimental data with an average error percentage of 7.6% for Fe₂B in 1045 steel, 15.8% for FeB and 3.4% for Fe₂B in M2 steel.     

Many-body effects in diffusion-limited kinetics

We review a novel approach to treating many-body effects in diffusion-limited kinetics. The derivation of the general expression for the survival probability of a Brownian particle in the presence of randomly distributed traps is given. The reduction of this expression to both the Smoluchowski solultion and the wellknown asymptotic behavior is demonstrated. It is shown that the Smoluchowski solution gives a lower bound for the particle survival probability. The correction to the Smoluchowski solution which takes into account the particle death slowdown in the initial process stage is described. The steady-state rate-constant concentration dependence and the reflection of many-body effects in it are discussed in detail.     

非晶钛酸铋的晶化过程

利用差热分析、X射线衍射和透射电子显微镜等技术对溶胶-凝胶法合成的凝胶的晶化过程进行了分析，实验结果表明，Bi₄Ti₃O₁₂非晶凝胶晶化过程经历了四个过程：首先在433℃先形成了Bi₂O₃和TiO₂亚稳相，然后在488℃时TiO₂亚稳相与Bi₂O₃反应形成Bi，Ti复合氧化物亚稳相Bi₂T 关键词： 钛酸铋 铁电材料 溶胶凝胶 非晶 晶化过程     

高立体选择合成N,N′-取代-双-(反式-β,γ-二取代-γ-丁内酰胺)的简便方法(英文)

顺式 -1 -甲氧羰基 -2 -芳基 -6 ,6 -二甲基 -5 ,7-二氧螺环 [2 ,5 ]-4 ,8-辛二酮与联苯二胺 ( 0 )或 4 ,4′-亚甲基二苯胺 ( 1 )在二氯甲烷中 ,4 0℃搅拌反应合成得到化合物 0和 1 ,干燥后进一步在二甲苯中回流即可得到N,N′-取代 -双 -(反式 -β,γ-二取代 -γ-丁内酰胺 ) ( 0或 1 ) ,得率高 ,立体选择性好 ,方法简便