生物质快速热解制备液体燃料

本文回顾了生物质快速热解液化技术的国内外研究现状,重点叙述了初级生物油的化学组成和燃料性质,指出生物油是一种复杂的含氧有机混合物,具有水分含量高、氧含量高、热值低、酸含量高、安定性差和化石燃油不互溶等独特的性质;针对这些性质,介绍了几种常用的生物油精制提炼方法,包括催化裂解、催化加氢、高温热解气过滤、添加助剂、催化酯化、柴油乳化以及制备富氢合成气与费托合成,并分析了各种精制技术发展的关键问题。     

Compatibility and stability tests of risperidone with soft-drinks by isothermal titration microcalorimetry

Isothermal titration microcalorimetry has been applied to investigate the compatibility testing of risperidone oral solution with soft-drinks and the interaction with tea tannin such as (–)-epigallocatechin, (–)-epicatechin, theaflavin and their gallates. In aqueous solution, risperidone was exothermically bound to tea tannin with binding affinity (10³–10⁴ M^–1), small enthalpy and entropy changes reflecting van der Waal’s interaction to form an insoluble complex at 1:1 molar ratio. The heat effect of risperidone titrated into soft-drinks containing tannin was exothermic and proportional to the quantity of the complex. While, no significant heat effect was found for risperidone titrated into a pet-bottled water and an infusion of parched barley without tea tannin. These results were agreed with stability testing of risperidone in some soft-drinks by HPLC method.     

废聚丙烯塑料等离子体热解研究——水蒸气的加入对改善气体品质的影响

以聚丙烯为试验物料，利用N2热等离子体在等离子体反应器内进行了一系列热解试验，重点考察了气体产物成分及含量。在反应过程中加入过热水蒸气以改善气体品质，在本实验条件下，气体产物中CO与H2之和可以达到40%，C2H2可达到5%。     

Pyrolysis study of fluorinated sol-gel silica

Fluorinated silica gels at various fluorine content were prepared via sol-gel by hydrolysis of 3,3,3-trifluoropropyltrimethoxysilane and tetraethoxysilane mixtures. The gels, of nominal stoichiometry Si(CH₂CH₂CF₃)_XO_(2-X/2)(X=0.1-1), were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS) and N₂ adsorption analysis. The thermal stability of the fluorinated samples was investigated by coupling thermogravimetric measurements with mass spectrometric and gas chromatographic analyses of the evolved gaseous species. The chemical reactions occurring in the gel matrices during heating were siloxane chain rearrangements involving condensation between residual hydroxyl and ethoxyl groups in the 100-350°C temperature range, whereas the thermal decomposition of the fluoroalkyl groups were observed at higher temperatures (450-600°C). The release of the fluoroalkyl moieties also involved C-F/Si-O bond exchanges inside the siloxane chains, with gas-phase evolution of different fluorinated silicon units. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molecular fractionation in isotactic polypropylene during isothermal crystallization

The nucleation frequency of isotactic polypropylene shows for certain molecular weight distributions during isothermal crystallization a “stepwise” development of the nuclei as a function of time. The resulting curve can be fitted by a superposition of exponential functions assuming a separate nucleation density for each nucleation step. The multimodal nucleation is discussed as a consequence of molecular fractionation effects during crystallization. Received: 23 October 1997 Accepted: 12 May 1998     

天祝煤MRF工艺热解焦油的组成分析

本文对天祝煤ＭＲＦ（ＭｕｔｉｓｔａｇｅＲｏｔａｒｙＦｕｒｎａｃｅ）热解焦油进行了常规及元素分析，了解其基本特性；用毛细管色谱分别对焦油各馏分进行了分析，共定性定量了１０３种化合物，酚类化合物以低级酚（苯酚、甲酚）为主，中性化合物为多烷基芳烃衍生物、脂肪族链状烷烃和烯烃。上述分析结果为从焦油中提取酚类化工原料或将其加工成各种燃料油的可行性提供了依据。     

石油焦与煤混合燃料热重分析研究

石油焦与煤混合燃烧是高效处理石油焦的有效方法，作者对选用的石油焦和煤不同配比的混合燃料进行了热重分析研究。使用常压高温热天平研究、分析了各配比混合燃料的热解特性和燃烧特性。并根据化学动力学方法计算了各过程的化学动力学参数，即活化能E和频率因子A0。结果表明，各混合燃料热解起始温度大致相同，随煤焦比减小，挥发分析出速率变缓，最大释放速度所对应的温度升高，最终失重率减小，挥发分释放特性指数减小；随煤焦比增大，混合燃料着火温度和燃尽温度逐渐降低，最大燃烧速率所对应的温度降低，燃烧特性指数增大；随煤焦比减小，活化能和频率因子增大。     

聚苯基不对称三嗪的热分解

用高分辨裂解气相色谱－质谱（ＨＲＰｙＧＣ－ＭＳ）考察了由对苯二眯腙和四种不同芳香族四酮合成的聚苯基不对称三嗪的热分解行为，鉴定了相应裂解产物的组成、分布及其与高分子结构的关系，并用热重法（ＴＧ）测定了它们的热分解反应动力学参数，提出了其热分解反应机理．     

聚丙烯/纳米蒙脱土复合材料的结晶动力学研究

采用热分析方法，研究了聚丙烯／纳米蒙脱土复合材料（PP／CLAY）的等温结晶行为，并分别用Avrami方程和赵志英方法对所得数据进行了分析，研究结果表明，纳米蒙脱土微粒对聚丙烯等温和非等温结晶行为均有不同程度的影响，可提高聚丙烯的结晶速率并改善结晶结构。     

On-probe pyrolysis desorption electrospray ionization (DESI) mass spectrometry for the analysis of non-volatile pyrolysis products

An on-probe pyrolyzer has been constructed and interfaced with desorption electrospray ionization (DESI) mass spectrometry (MS) for the rapid analysis of non-volatile pyrolysis products. The detection and analysis of non-volatile pyrolysis products of peptides, proteins and the synthetic polymer poly(ethylene glycol) were demonstrated with this instrument. The on-probe pyrolyzer can be operated off-line or on-line with the DESI source and was interfaced with a tandem MS (MS/MS) instrument, which allowed for structure characterization of the non-volatile pyrolytic products. Advantages of this system are its simplicity and speed of analysis since the pyrolysis is performed in situ on the DESI source probe and hence, it avoids extraction steps and/or the use of matrices (e.g., as in MALDI–MS analyses).