Preparation and Characterization of Linear and Miktoarm Star Side-Chain Liquid Crystalline block Copolymers with p-Methoxyazobenzene Moieties via a Combination of ATRP and ROP

One linear and two miktoarm star side-chain liquid crystalline (LC) block copolymers with p-methoxyazobenzene moieties were prepared by a combination of ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) techniques. First, ROPs of ε -caprolactone (ε -CL) were carried out catalyzed by Sn(Oct)₂ using three multifunctional initiators, hydroxyethyl 2-bromoisobutyrate (AB type), 3-hydroxy-2-(hydroxymethyl)-2-methylpropyl 2-bromo-2-methylpropanoate (A₂B type) and 2,2-bis(hydroxymethyl)propane-1,3-diyl bis(2-bromo-2-methylpropanoate) (A₂B₂ type), at 110°C in toluene, respectively. Second, the previously obtained poly(ε -caprolactone)s (PCLs) with bromines functionalities were used as the macroinitiators to conduct ATRP of 6-(4-methoxy-4-oxy-azobenzene) hexyl methacrylate (MMAZO) with CuBr/PMDETA as the catalyst systems at 85°C in anisole to prepare the linear and miktoarm side-chain LC block copolymers (PCL-b-PMMAZO, (PCL)₂-(PMMAZO) and (PCL)₂-(PMMAZO)₂). The produced polymers were well-controlled with the controlled molecular weights and the relatively narrow molecular weight distributions (M _w/M _n ≤ 1.35). The structures of the obtained polymers were all characterized by NMR, FT-IR and GPC analysis. Furthermore, the LC properties of the linear and miktoarm star block copolymers were also investigated by differential scanning calorimetry (DSC) and thermal polarized optical microscopy (POM).     

Synthesis and Characterization of Amphiphilic Copolymer Acrylic Acid-co-p-Chloromethylstyrene

The free radical copolymerization of acrylic acid (M₁) with p-chloromethylstyrene (M₂) in dioxane and in the presence of α,α′-azobisisobutyronitrile (AIBN) at 65°C is reported. Copolymer compositions of six copolymer samples obtained from feed ratios of M₁:M₂ = 95.2:4.8 to 21.4:78.6 were determined by ¹H-NMR. The reactivity ratios of AA/p-CMS copolymerization system calculated by the F-R method were r ₁ = 0.50 ± 0.06 and r ₂ = 1.52 ± 0.15, almost the same as r ₁ = 0.43 ± 0.21 and r ₂ = 1.31 ± 0.14 by the extended K-T method. On the basis of the reactivity ratios of two monomers, the sequence length distribution in the AA/p-CMS copolymers was obtained. For f₂ = 4.77%, the monomer unit of p-CMS is individually separated in the chain of AA; for f₂ = 35.53%, the alternating tendency prevails and a large number of mono-sequences are formed. The number-average ( _n) and weight-average ( _w) molecular weights were determined by gel permeation chromatography. The effect on molecular weights of feed composition is also discussed. In the presence of constant initiator concentration, the gradual increase in the ratio of M₂:M₁ (from14.7:85.3 to 78.6:21.4) was accompanied by a decrease in molecular weights ( _n from 11907 to 3961).     

Swelling Characterization of the Superabsorbent Copolymer in the Petroleum-Based Solvent-Water Mixtures

The crosslinked and porous copolymer grains were synthesized by inverse suspension polymerization of acrylamide. The synthesized copolymer was characterized by Fourier Transform Infrared Spectroscopy (FTIR) and Scanning Electron Microscopy (SEM). It was achieved to absorbed 418 g water by 1 g copolymer after 5 min waiting time. Moreover, it was seen that about 99% of water was absorbed by 1 g copolymer in the solvent water mixtures (300 mL solvent–200 mL distilled water) after 2.5 min waiting time. The diffusion coefficients of the copolymer in the solvent-water mixtures were found between 8.87 · 10⁴ and 10.64 · 10⁴ cm²s^?1. Furthermore, the copolymer in distilled water achieved to reach a high value of the diffusion coefficient (13.2 · 10⁴ cm²s^?1).     

Synthesis of Some Polymer‐Metal Complexes and Elucidation of their Structures

In this study, the nine coordination polymers of Fe(III), Co(II) and Ni(II) salts have been synthesized using polyacrylamide (PAA), polt(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA) and their structures were characterized by magnetic and conductivity measurements, ultraviolet‐visible (UV‐VIS), FTIR spectroscopy and thermogravimetric analysis (TGA). The structures of Fe(III) complexes in the all coordination polymers were found as tetrahedral. The structures of PAA‐Co(II) coordination polymer was determined as octahedral geometry whereas PEG‐Co(II) and PVA‐Co(II) complexes showed as tetrahedral structure. PAA‐Ni(II) and PEG‐Ni(II) complexes have octahedral geometry, whereas PVA‐Ni(II) has a square planar structure. Besides, the stress‐strain experiments of PVA‐metal coordination polymers obtained rubber‐like structure were carried out and the value of breaking‐strain of PVA‐Ni(II) complex was found to be about 17% of vulcanized natural rubber. The conductivities of the resulting polymer‐metal complexes were measured by four‐probe technique and were found in the range 10^?5?10^?6 Scm^?1. Thus, it was suggested that they can be used in the field potential application of conducting polymers. TGA results revealed that among the complexes PEG‐Fe(III) and PVA‐Fe(III) complexes have the highest thermally stable.     

Photovoltaic Cells Involving the Nonconjugated Conductive Polymer Iodine-Doped Styrene-Butadiene-Rubber (SBR)

Novel photovoltaic cells involving a nonconjugated conductive polymer have been fabricated using titanium dioxide/doped styrene-butadiene-rubber/carbon on ITO coated PET substrates. Photocurrents and photo-voltages for different intensities of light (emission at 300–700 nm) have been measured. These cells have shown significantly higher photocurrents and photo-voltages compared to previous reports. A photocurrent density of about 0.25 mA/cm² and a photo-voltage of 0.74 V have been measured for a light intensity of ～4 mW/cm².     

Preparation of Epoxy-Functionalized Magnetic Polymer Nanospheres for Magnetically Targeted Radiotherapy

Magnetic poly(styrene?methyl methacrylate-glycidyl methacrylate)/Fe₃O₄ nanospheres with epoxy groups were prepared by modified one-step mini-emulsion polymerization in the presence of Fe₃O₄ ferrofluids. The products were characterized by fourier-transform infrared spectrum, transmission electron microscopy, thermogravimetric analysis and vibrating sample magnetometer. After surface modification with diaminopropane, histidine was covalently linked to the amine group of magentic nanospheres using glutaraldehyde as crosslinker. Finally, the preliminary labeling study based on non-radioactive rhenium was carried out and the labeling efficiency reached 80.4%. Such magnetic nanospheres had promising potential in magnetically targeted radiotherapy of cancer.     

Superfast Responsive Ionic Hydrogels: Effect of the Monomer Concentration

A series of strong polyelectrolyte gels were prepared in aqueous solution, using the sodium salt of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS) as the monomer and N,N'‐methylene(bis)acrylamide (BAAm) as a crosslinker. The gels were both prepared below (?22°C) and above (25°C) the bulk freezing temperature of the water, producing cryogels and hydrogels, respectively. The crosslinker (BAAm) content was set at 17 mol%, while the initial monomer concentration C_o was varied over a wide range. It was found that, at ?22°C, a macroscopic network starts to form at an initial monomer concentration of as low as 0.1 w/v%. In contrast to the conventional hydrogels formed at 25°C, the cryogels have a discontinuous morphology consisting of polyhedral pores of sizes 10⁰–10² μm. The cryogels exhibit superfast swelling properties, as well as reversible swelling–deswelling cycles in water and acetone. An increase in the initial monomer concentration from 2.5 to 10% further increases the response rate of the cryogels due to the simultaneous increase of the porosity of the networks.     

Functions of Acyclic Poly(ethylene Oxide) Homologs: Acceleration of Nucleophilic Reactions and Selective Ion Transport through Membranes

The acceleration effect of poly(ethylene oxide) on nucleophilic reactions was investigated. The enhancement of the reaction rate was interpreted by the cooperative solvation of alkali metal ions with ethereal oxygens of PEO resulting in active nucleophilic anions. In relation to the complex formation of alkali metal ions with PEO, the oligo(ethylene oxide) derivatives were prepared as the synthetic ionophores, which were able to transport alkali metal ions selectively through a liquid membrane against the alkali metal ion concentration.     

Synthesis and Polymerization of Spiro Oxyphosphoranes

Novel methods of synthesis of spiro acyloxyphosphoranes are described emphasizing the significance of the first isolated instance of these new species. Then, the no-catalyst alternating copolymerizations of the combinations of cyclic phosphorus(III) compounds (serving as nucleophilic monomer, M_N) with acrylic acid derivatives and with α-keto acids (electrophilic monomer, M_E) are mentioned. These copolymerizations proceed without added initiator. Spiro oxyphosphoranes play an important role in the copolymerization scheme in the equilibrium with the ⁺M_N - M_E ^? zwitterion, the key intermediate of the copolymerization. Finally, new reactions of spiro acyloxyphosphoranes with nucleophiles, alcoholysis and aminolysis polymerizations are presented.