熔融浸渍法制备锂离子电池正极材料LiMn2O4的研究

采用LiNO3和MnO2为原料,在650℃下制备了尖晶石型的LiMn2O4.通过X射线衍射、扫描电子显微镜、热重分析和电化学性能测试,发现该化合物具有很高的放电比容量和较好的循环性能,首次放电比容量可达到122 mA·h/g.并对循环性能衰减的各种因素进行了讨论.     

Dimerization of some substituted benzoic acids in aqueous solution from conductance measurements

Precision molar conductances of benzoic, o-toluic, 2,6-dimethylbenzoic, 2,3,6-trimethylbenzoic, and, o-fluorobenzoic acids have been determined in aqueous solution as a function of temperature and of concentration up to near saturation (<0.035 M). At the higher concentrations molar conductances are found to be less than anticipated for the simple dissociation of a 1-1 electrolyte. Although the deviations are only 1% or less they have been interpreted to show that these acids are dimerized in solution. The interpretation includes an assumption that the dimer ionizes to produce a triple ion. Increasing numbers of methyl groups lead to increasing dimerization. For those acids with two ortho groups the dimerization increases with increasing temperature while the other three show decreasing dimerization with increasing temperature. Temperature functions have been determined for the dimerization constants and from these functions standard changes in enthalpy, entropy, and heat capacity have been determined. Comparisons are made with dimerization studies in non-aqueous solvents. From these as well as the behavior of benzene in water it is concluded that a major factor driving the dimerization is hydrophobic interaction. To provide a limiting conductance of the triple ion needed in the dimerization calculations a conductance study was also made for o-Phenylbenzoic acid on the assumption that its anion provides an approximate model of the triple ion.     

四烷基锡中性载体推动亚硝酸根离子迁移穿透大块液膜

通过大块液膜体系研究了四烷基锡的碳链长度、载体浓度.NO_2~-浓度及抗衡离子等因素对NO_2~_穿透含四烷基锡的液膜的传质速率的影响,讨论了它们与四烷基锡为载体的离子电极性能间的关系。NO_2~-通过四烷基锡为载体的液膜的迁移规律符合离子对传输模式。     

Characterization and catalytic behavior of La2 - x (Sr, Th)xCuO4 ± λ in reaction NO+CO

Two mixed oxide systems La₂-_xSr_xCuO_{4± λ} (0.0⩽x⩽1. 0) and La_2-xTh_xCuO_{4± λ} (O. O⩽x⩽ 0.4) with K₂NiF₄ structure were prepared by varyingx values. Their crystal structures were studied by means of XRD and IR spectra. The average valence of Cu ion at B site, nonstoichiometric oxygen (λ) and the chemical composition in the bulk and on the surface of the catalysts were measured by means of chemical analysis and XPS. The catalytic behavior in reaction CO+NO was investigated under the regular change of average valence of Cu ion at B site and nonstoichiometric oxygen (λ). Meanwhile, the adsorption and activation of the small molecules NO and the mixture of NO+CO over the mixed oxide catalysts were studied by means of MS-TPD. The catalytic mechanism of reaction NO+CO over these oxide catalysts were proposed; and it has been found that, at lower temperatures the activation of NO is the rate determining step and the catalytic activity is related to the lower valent metallic ion and its concentration, while at higher temperatures the adsorption of NO is the rate determining step and the catalytic activity is related to the oxygen vacancy and its concentration. Project supported by the National Natural Science Foundation of China.     

离子色谱-质谱联用技术测定污泥样品中的痕量高氯酸盐

建立了离子色谱-质谱联用技术测定活性污泥样品中高氯酸盐的分析方法。以高容量、强亲水性的IonPacAS20(2mm)阴离子交换柱为分析柱,EGC在线产生等浓度KOH为淋洗液,淋洗液经抑制成水后将样品带入质谱检测。ESI-MS-MS以多元反应监测模式监控100.8/84.9、98.8/66.9、100.8/68.9和98.8/82.9离子对,以98.8/82.9离子对的峰面积进行定量。该方法对高氯酸盐的检出限(S/N=3)为0.01μg/L,高氯酸盐在0.05~100μg/L浓度范围内具有良好的线性,线性相关系数r=0.9988。0.2μg/L的标准溶液重复进样9次,高氯酸盐峰面积的相对标准偏差(RSD)为2.3%。运用该方法测定采自不同地区的活性污泥样品中的高氯酸盐,并对样品加标回收,得回收率在88.5%~102.2%之间。     

Case for projectile kinetic energy gain in stopping power studies

Under certain collision conditions, a swift ion projectile colliding with a target will gain rather than lose kinetic energy, contrary to the standard conception of stopping power. In this work, we consider the conditions for such a collision such that the energy loss is negative, that is, that there will be projectile kinetic energy gain. In particular, for a target initially in the ground state we find that the projectile gains kinetic energy only when charge exchange and de‐excitation processes are involved. This occurs when the electron affinity of the projectile is larger than the ionization potential of the target. Consequences of this effect are analyzed. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 215–221, 2003     

Conductance Study of the Binding of K+ by Dibenzo-pyridino-18-crown-6 and 1,10-N,N′-didecyl-diaza-18-crown-6 in Acetonitrile

The binding of K+ by dibenzo-pyridino-18-crown-6 (B2-py-18-C-6) and1,10-N,N-didecyl-diaza-18-crown-6 (22-DD) has been studiedconductometrically at 10, 15, 20 and 25 °C in acetonitrile. Thecomplexes formed were assumed to have 1 : 1 stoichiometry. The complexes ofK+ with 18-crown-6 (18-C-6) and dibenzo-18-crown-6 (B2-18-C-6) were alsostudied for comparison purposes. The stability constant, K, of a givencomplex and its molar conductance, c, were obtained by subjectingthe conductance data to a non-linear least-squares curve fitting procedure.The values of the enthalpy change, H, the entropy change, Sand the Gibbs free energy, G, associated with the formation of the 1: 1 complexes were derived and compared with relevant literature data. Thevalues of G at 25 °C indicate that the binding capacity of thefour macrocycles follows the order 18-C-6 > 22-DD > B2-18-C-6 >B2-py-18-C-6. The difference between the molar ionic conductance of the freeK+ cation and that of the bound cation, KL+, was estimated and the trend insuch differences correlates with the molecular size of the macrocycle, L.     

单分散亲水两性离子交换树脂的制备及其在生物大分子分离中的应用

采用分散聚合与溶胀聚合相结合的方法及高分子溶液致孔技术, 成功地制备了粒径为5.0 μm大孔和超大孔结构的单分散亲水性交联聚甲基丙烯酸环氧丙酯树脂, 并进行了结构表征. 将该树脂经胺化后再与1,3-丙磺酸内酯反应, 得到一种新型的两性离子交换(强阳-强阴型)高效液相色谱填料. 研究了该填料对标准蛋白分离性能及流动相中有机溶剂、 流速和pH值对蛋白保留的影响. 实验结果表明, 在流速为3 mL/min时, 采用线性梯度洗脱, 在4.0 min内可同时快速基线分离3种酸性和2种碱性蛋白.     

A microcalorimetric study of the association of hexacyanoferrate(II) ions with calcium and magnesium ions in aqueous solution

Using flow microcalorimetry, the ion association reaction M²⁺(aq)+Fe(CN) ₆ ^4– (aq)=MFe(CN) ₆ ^2– (aq) (M=Ca, Mg) has been studied at 25°C over the ionic strength range 0.02 to 0.08 mol-dm^–3. Analyses of the data to obtain H^o, the enthalpy change at infinite dilution, are described. The value obtained for H^o is sensitive to the kind of functions used to correct for non-ideal behavior.     

Genetic engineering to enhance the selectivity of protein separations

The ability to recover and purify natural and recombinant proteins, and the costs of doing so remain a major task in introducing the potential products of biotechnology. The bases for separation range from specific binding onto tailored reagents to solubility and partitioning behavior governed by a mixed bag of size, charge, and hydrophobicity. In most cases, a combination of methods is used in sequence, and improvements in the selectivity at an early stage can enhance the effectiveness of subsequent (and usually more costly) steps. Genetic engineering provides a means of improving the selectivity within the context of existing separation methods. By this strategy, improvements in selectivity are sought by bestowing a distinctive property on the protein of interest. The primary sequence of amino acids is altered, such that the protein can be selectively removed from other components of the multicomponent mixture in which such products are commonly found. In this article, the range of these “distinctive properties” and their pairing with various separation methods will be reviewed. Specific examples from our work, in which a distinctive charge is provided via a polypeptide “purification” fusion tail, will be discussed. Separation methods we have used with these fusion proteins are precipitation, two-phase aqueous extraction, reversed micellar extraction, and ion exchange using both resins and membranes.