微波消化技术在生物微量元素测定中的应用

用微波消化技术消化了多种食物样品．与传统的干、湿消化法相比，微波消化更加简单、快速、节省、沾污少、损失少、环境污染少．用原子吸收测定样品中的Ｆｅ，Ｃ．Ｖ＜２％，加标回收率为９８％～１００％，测定美国生物标准物质牛肝中的Ｆｅ的相对误差为０．３％，结果令人满意．     

A molecular docking model of SARS-CoV S1 protein in complex with its receptor, human ACE2

The exact residues within severe acute respiratory syndrome coronavirus (SARS-CoV) S1 protein and its receptor, human ACE2, involved in their interaction still remain largely undetermined. Identification of exact amino acid residues that are crucial for the interaction of S1 with ACE2 could provide working hypotheses for experimental studies and might be helpful for the development of antiviral inhibitor. In this paper, a molecular docking model of SARS-CoV S1 protein in complex with human ACE2 was constructed. The interacting residue pairs within this complex model and their contact types were also identified. Our model, supported by significant biochemical evidence, suggested receptor-binding residues were concentrated in two segments of S1 protein. In contrast, the interfacial residues in ACE2, though close to each other in tertiary structure, were found to be widely scattered in the primary sequence. In particular, the S1 residue ARG453 and ACE2 residue LYS341 might be the key residues in the complex formation.     

Micro-Determination of Protein Containing SH– and –S–S– Groups Based on the Polarographic wave of an Electroactive Derivative

This paper presents a new simple and sensitive method for the micro-determination of protein containing SH– and –S–S– groups based on the single sweep polarographic wave of an electroactive derivative. In 0.04molL^–1 Na₃PO₄ and 0.2% ascorbic acid solution, protein is heated in a boiling water bath for 15min, the reaction product giving a sensitive reduction wave at –0.70V (vs. SCE). The wave height is linearly proportional to the concentration of protein. The calibration curves of bovine serum albumin (BSA), human serum albumin (HSA), ovalbumin (OVA) and lysozyme (Lyso) are constructed under the optimal conditions. For BSA and HSA, the linear ranges and detection limits are 0.05–24mgL^–1 and 0.02mgL^–1, respectively. The method has been applied to the determination of protein in human serum samples with satisfactory results. The mechanism of the polarographic wave was also studied, and the results show that S^2– ion is released from the protein molecule during the derivatization reaction, the wave being attributed to the reduction of HgS.     

Digests or extracts?—Some interesting but conflicting results for three widely differing polluted sediment samples

Three sets of samples have been investigated in some detail. One set is from a river polluted by mine workings, containing substantial levels of Fe, Mn,Cu, Zn and Ni with traces of many other metals. The second set consists of typical estuarine sediments contaminated from a wide range of industrial sources, and the third set consists of oily drilling cuttings from the sea bottom in the vicinity of a North Sea oil production platform.These samples have been subjected to treatment 1) with EDTA at two different pH's (extracts) 2) with HNO₃/H₂O₂ 3) with HNO₃/HCl and 4) with HNO₃/HCl/HF (digests). EDTA recoveries, compared toaqua regia digests, are often very reproducible, not dependent on pH, and usually significantly low. Nitric/peroxide andaqua regia digests often give very close results suggesting that these are meaningful values indicating the maximum levels of polluting metals in the sediments. However, the triple acid digest with HF does sometimes give higher values (and reasonable agreement for CRM's such as MESS-1) but with poorer reproducibility.     

Structure control within poly(amidoamine) dendrimers: size, shape and regio-chemical mimicry of globular proteins

This work describes the syntheses of a new poly(amidoamine) (PAMAM) dendrimer family possessing a disulfide function (cystamine) in its core. Traditional redox-chemistry associated with the disulfide core in these dendrimer structures, provides a versatile strategy for designing unique sizes, shapes and controlling the regio-disposition of chemical groups on the surface of these dendrimers. Various single site, sulfhydryl functionalized dendron reactants may be generated in situ, under standard reducing conditions (i.e. dithiothreitol (DTT)). Facile control of size, shape and chemical functionality placement involves covalent hybridization of these single point, sulfhydryl reactive dendron components. This is accomplished by re-oxidation in the presence of air, to yield generation/surface chemistry differentiated cross-over products which may be isolated by preparative thin layer or column chromatography. Differentiated cystamine core dendrimers derived from combination and permutation of lower generation (i.e. Gen.=0-3) sulfhydryl functionalized dendrons possessing amino, hydroxyl, acetamido or dansyl surface groups, were synthesized and isolated. They were characterized by a variety of methods including; ¹³C NMR, capillary electrophoresis (CE), gel electrophoresis (PAGE), thin layer chromatography (TLC) and electrospray (ES) or matrix assisted laser desorption ionization (MALDI-TOF) mass spectrometry. This general strategy has broad implications for the systematic size, shape and regio-chemical control of a wide range of dendritic nanostructures, many of which may be designed to mimic the sizes, shapes and regio specific chemo-domains observed for globular proteins.     

Rapid Protein Hydrolysis by Microwave Irradiation Using Heat-Resistant Teflon-Pyrex Tubes

A rapid peptide-bond hydrolysis by means of microwave irradiation is introduced for the facile preparation of protein hydrolysates used for amino acid analysis. The optimal hydrolysis condition has been determined using several enzymes with known amino acid compositions. The effects of hydrolysis time on the recovery of various labile and hydrophobic amino acids are also exemplified in the microwave heating of standard amino acids. The method has been applied to the complete amino acid analysis with a single nonvolatile solvent of methanesulfonic acid with good recovery of tryptophan and half-cystine. It provides a radical expedition of protein and peptide hydrolysis via commercial microwave ovens and specially-designed Teflon-Pyrex tubes, circumventing the tedious procedures using vacuum-sealed pyrex lubes heating at 110°C for more than 24 h. This novel type of microwave chemistry associated with rapid peptide-bond cleavage is of great potential in the automation of the complete process of amino acid analysis starting from the preparation of protein hydrolysates.     

Beer Digestions for Metal Determination by Atomic Spectrometry and Residual Organic Matter

Many standard and official sample digestion procedures for trace metal determination are carried out in open vessels on hot plates. A new procedure for the determination of trace metals by flame atomic absorption spectrometry or inductively coupled plasmaatomic emission spectrometry in beer samples was developed to be performed in closed reactors assisted by microwaves. The results are compared with the ones obtained by other procedures by means of the analysis of the variance. The differences between the procedures are attributed to residual organic matter. Voltammetry, absorption molecular spectrophotometry and high pressure liquid chromatography with a photodiode array detector are used to study the nature of these residues. Nitrobenzoic acids, phenolic acids and other organic compounds are often present after digestion. The results obtained are related to the precision in metal determination by atomic spectrometry. The need for elaboration of certified reference materials for trace metals in beer is suggested.     

New methods for data analysis of isothermal titration calorimetry

Heat divided by ligand concentration vs. heat, similar to the Scatchard plot, was introduced to obtain the equilibrium constant (K) and the enthalpy of binding (DH) using isothermal titration calorimetry data. Values of K and DH obtained by this linear pseudo-Scatchard plot for a system with a set of independent binding sites (such as binding fluoride ions on urease and monosaccharide methyl a-D-mannopyranoside on concavalin A) were remarkably like that obtained from a normal fitting Wiseman method and other our technical methods. On applying this graphical method to study the binding of copper ion on myelin basic protein (MBP), a concave downward curve obtained was consistent with the positive cooperativity in the binding. A graphical fitting by simple method for determination of thermodynamic parameters was also introduced. This method is general, without any assumption and restriction made in previous method. This general method was applied to the product inhibition study of adenosine deaminase. This revised version was published online in July 2006 with corrections to the Cover Date.     

Concerning the Thermal Diastereomerization of the Green Fluorescent Protein Chromophore

Summary. Two model compounds for the green fluorescent protein chromophore were prepared. One of them incorporates the natural 4-hydroxybenzylidene group of the natural tyrosin derived chromophore, the other one bears a methyl group instead of the hydroxy group. Whereas the photochemically prepared (E)-diastereomer of the first compound very effectively reverted thermally (room temperature) to the thermodynamically stable (Z)-diastereomer, the (E)-diastereomer of the second derivative proved to be stable even at elevated temperatures for more than a day. This finding can be rationalized by constructing the appropriate resonance structures showing that only in the first case an effective delocalization enables partial single bond character of the benzylidene double bond. From the standpoint of chemical etiology, only Nature’s choice of the tyrosin derived chromophore of the green fluorescent protein provides an efficient radiationless thermal relaxation channel for the unwanted photo-diastereomerization product formed after excitation besides the dominating fluorescence channel of its chromophore.