Enhancement of Photocurrent Generation of a Novel Stilbazolium Dye Dimer in LB Monolayer Films

A novel dye dimer,bis-{[1-(N-hexadecyl-4-pyridinium)-2-(4-N,N-dimethylaminopheyl)] ethenyl} methane diiodide (C16BP) was synthesized,and the photoelectrochemistry of the dye Langmuir-Blodgett monolayer modified ITO electrode was investigated.For comparison,the photoelectrochemistry of the monomer (E)-N-hexadexyl-4-[2-(4-N,N-dimethylaminophenyl) ethenyl] pyridinium iodide (C16P) was also measured.The results show that the photocurrent generation property of the dimer is enhanced.The photocurrent generation quantum yield is 0.38% for C16BP,while that for C16P is 0.23%.     

Multiple lithium exchange under lithium cationization of cyclodextrins

Multiple lithium exchange is observed during electrospray ionization of alpha-, beta- and gamma-cyclodextrins from aqueous methanolic solution containing LiOH. Apart from [M + Li](+) and [M + nLi - (n - 1)H](+) ions, abundant multiply lithiated doubly charged ions corresponding to [M + nLi - (n - 2)H](2+) ions were observed. At least six lithium exchanges in alpha-cyclodextrin, seven in beta-cyclodextrin and eight in gamma-cyclodextrin were noted. The propensity of multiply lithiated doubly charged ions is much less in the open-ended maltoheptaose. It appears that during droplet or cluster formation and subsequent desolvation, LiOH trapped in the cavity of cyclodextrin reacts to form multiply lithiated ions. The singly charged [M + Li](+) and doubly charged [M + 2Li](2+) ions fragment by glycosidic cleavages, giving B series of ions, whereas the multiply lithiated ions fragment by cross ring cleavages ((2, 4)A or (O, 2)X) followed by glycosidic cleavage. From the tandem mass spectra, it appears that a maximum of two lithium exchanges occur in one sugar unit in these cyclodextrins.     

The Enhancement of Efficiency of High-order Harmonic in Intense Laser Field Based on Asymptotic Boundary Conditions and Symplectic Algorithm

Asymptotic boundary condition (ABC) of laser-atom interaction presented recently is applied to transform the initial value problem of the time-dependent Schrödinger equation (TDSE) in infinite space into the initial and boundary value problem in the finite space, and then the TDSE is discretized into linear canonical equations by substituting the symmetry difference quotient for the 2-order partial derivative. The canonical equation is solved by symplectic algorithm. The ground state and the equal weight coherent superposition of the ground state and the first excited state have been taken as the initial conditions, respectively, while we calculate the population of bound states, the evolution of average distance and the high-order harmonic generation (HHG). The conversion efficiency of HHG can be enhanced by initial coherent superposition state and moderate laser intensities     

Evaluation of a synergetic effect between Rh as permanent chemical modifier and acetylacetone as complexing agent in Sc determination in sediment slurry samples by ETAAS

In the present work, scandium was determined in sediment slurry samples (from three different rivers) by electrothermal atomic absorption spectrometry (ETAAS). Slurries were prepared by weighting 100 mg of dry sediment samples (≤53 μm particle sizes) and adding 6 ml of HCl:HNO₃:HF (3:1:2, v/v). Accurate results were only possible due to the synergetic effect between Rh as permanent chemical modifier and acetylacetone (Acac) as complexing agent. The same platform was used for 400 heating cycles. The performance of the chemical modification was evaluated by using scanning electron microscopy (SEM), synchrotron radiation X-ray fluorescence (SRXRF) and some figures of merit (precision and detectability). The best analytical conditions were attained using 1500 and 2550 °C as pyrolysis and atomization temperatures. The scandium content in the liquid phase of the slurries ranged from 61 to 73%, thus indicating, in this study, that both liquid and solid phases play an important role in slurry analyses. An amount of 5.0–20.0 μg l⁻¹ Sc linear range as well as LOD and LOQ of 0.19 and 0.62 μg l⁻¹, respectively, were obtained under these conditions. The accuracy was checked by using microwave-assisted decomposition, and the results compared to those obtained with the proposed methodology (slurry analysis). By checking both sets of the results, there is no statistical difference at the 95% confidence levels.     

Evaluating the mobility of toxic metals in untreated industrial wastewater sludge using a BCR sequential extraction procedure and a leaching test

The distribution and speciation of toxic metals in industrial wastewater sludge (IWS) was investigated. In this work, the modified BCR three-stage sequential extraction procedure was applied to the fractionation of Cr Pb Ni, and Cd in untreated industrial wastewater sludge from industrial sites in Hyderabad (Pakistan). The extracts were analyzed using electrothermal atomic absorption spectrometry. The procedure was evaluated using a certified reference material for soil mixed with sewage sludge BCR 483. The results from the partitioning study indicate that more easily mobilized forms (acid exchangeable) of Cd were dominant. The oxidizable fraction was dominant for all four toxic metals. Metal recovery was good, with <4% difference between the total metal recovered through the extractant steps and the total metal determined after microwave digestion. Lixiviation tests (DIN 38414-S4) were used to evaluate the leaching of toxic species from IWS, and it was observed that levels of leachable toxic metals were low compared to the amount of metal extracted in the exchangeable fraction of the BCR protocol.     

Investigations on the use of pneumatic cross-flow nebulizers with dual solution loading including the correction of matrix effects in elemental determinations by inductively coupled plasma optical emission spectrometry

The use of a so-called trihedral and a T-shaped cross-flow pneumatic nebulizer with dual solution loading for inductively coupled plasma optical emission spectrometry has been studied. By these devices analyte clouds from two solutions can be mixed during the aerosol generation step. For both nebulizers the correction of matrix effects using internal standardization and standard addition calibration in an on-line way was investigated and compared to elemental determinations using a conventional cross-flow nebulizer and calibration with synthetic standard solutions without matrix matching. A significant improvement of accuracy, both for calibration with internal standardization and standard addition, was obtained in the case of four synthetic solutions containing each 40 mmol L^− 1 Na, K, Rb and Ba as matrix elements and 300 μg L^− 1 Cd, Co, Cr, Cu, Fe, Mn, Ni and Pb as analytes. Calibration by standard addition in the case of dual solution loading has been shown to be very useful in the determination of elements at minor and trace levels in steel and alumina reference materials. The results of analysis for minor concentrations of Cr, Cu and Ni in steel as well as for Ca, Fe, Ga, Li, Mg, Mn, Na, Si and Zn in alumina powder certified reference materials subsequent to sample dissolution were found to be in good agreement with the certificates. Limits of detection were found to be only slightly above those for a conventional cross-flow nebulizer and a precision better than 3% was realized with both novel nebulizers.     

Quadrupole mass spectrometric study of positive ions from RF plasmas of pure CH4, CH4/H2, and CH4/Ar systems

Quadrupole mass spectrometry has been employed to characterize the ionic species in the discharges of pure CH₄, CH₄/H₂, and CH₄/Ar systems. For pure methane, the major positive ions in the discharge at low pressure (e.g., 0.15 torr) are CH ₃ ⁺ , C₂H ₃ ⁺ , CH ₂ ⁺ , C₂H ₂ ⁺ , CH ₄ ⁺ , C₂H ₄ ⁺ , and C₂H ₅ ⁺ at high pressure (e.g., 0.5 torr) the major ions are CH ₃ ⁺ , C₂H ₃ ⁺ , C₂H ₅ ⁺ , C₃H ₃ ⁺ , C H₃H ₇ ⁺ , C₄H ₇ ⁺ , C₅H ₇ ⁺ , C₆H ₅ ⁺ , and C₇H ₇ ⁺ . The relative abundances of C₁ ions decrease with increasing pressure, whereas those of higher-order ions increase with pressure. For 5% CH₄ + 95% H₂ mixture, in addition to those sampling from the pure methane plasma at the lower pressure, H _n ⁺ ions have also been detected. For 5% CH₄ +95% Ar mixture, the principal ions are CH ₃ ⁺ , CH ₂ ⁺ , CH⁺, CH ₅ ⁺ , Ar⁺, and ArH⁺; the ions containing more than two carbon atoms are negligible. In these discharges, the CH ₃ ⁺ and C₂H ₃ ⁺ are the most important positive ions in C₁ and C₂ ions, respectively. The ions detected are believed to come from the sheath between the electrode and the luminous plasma, and have high kinetic energy. An ion-molecule reaction mechanism is proposed which can well explain the observed main features of ionic products.Died June 1, 1991.     

Application of solvent extraction and synchronous spectrofluorimetry to the determination of the formation constant for a 1:1 complex of carbazole withβ-cyclodextrin in water-dimethyl sulfoxide medium

Extraction of carbazole in heptane was performed at 25±1°C with an aqueous dimethyl sulfoxide (DMSO) medium containing -cyclodextrin (CD) at consecutive concentrations in the range of 0–10 mM. The fluorescence intensity of carbazole remaining in the heptane phase was measured by synchronous scanning fluorimetry. The apparent formation constant (K _f) for a 1:1 carbazole: CD inclusion complex in water-DMSO medium was determined by using a linear plot of the distribution ratio calculated from the fluorescence intensities vs. the -CD concentration. The values thus obtained ranged from 477 M^–1 in a 10% v/v DMSO medium to 12.1 M^–1 in a 60% v/v medium. Good linear relationships were observed between logK _f and the DMSO concentration ([DMSO]), and also between logK _f and the logarithm of the distribution coefficient (K _d) for carbazole. The formation constant in 100% water was estimated to be approximately 1.0×10³ M^–1 on the basis of the logK _f vs. [DMSO] and the logK _f vs. logK _d correlations.     

Novel evaluation method of biodegradabilities for oil-based polycaprolactone by naturally occurring radiocarbon-14 concentration using accelerator mass spectrometry based on ISO 14855-2 in controlled compost

The biodegradabilities of poly(?-caprolactone) (PCL) powders (av. size = 180.7 μm) in controlled compost at 58 °C have been studied using the microbial oxidative degradation analyzer (MODA) based on ISO 14855-2 entitled “Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test”. The biodegradability of the PCL powders was 101.4% in a 56-day test period by the ISO method. The biodegradabilities of PCL powders have been studied using percent modern carbon (pMC) measured by accelerated mass spectrometry (AMS). Trapped CO₂ was analyzed by AMS to determine the pMC (sample) using ¹⁴C radiocarbon concentration. By using the theory that the pMC (sample) was the sum of pMC (compost) (104.88%) and pMC (PCL) (0%) as the respective ratios in the determined period, CO₂ (respiration) was calculated only from one reaction vessel. The biodegradability of PCL powders was 79.9% in a 56-day test period by the AMS method. It was found that respiration activities in the sample vessel including PCL, compost and sea sand were the same as that in the blank vessel including compost and sea sand without PCL during the active biodegradation period (0-33 day) at 58 °C. It was confirmed that respiration activities in the sample vessel were slightly higher than that in the blank vessel after active biodegradation due to the propagation of microorganisms using energy and metabolites by PCL biodegradation during those periods.     

Energy Landscape of Aptamer/Protein Complexes Studied by Single‐Molecule Force Spectroscopy

Aptamers are single‐stranded nucleic acid molecules selected in vitro to bind to a variety of target molecules. Aptamers bound to proteins are emerging as a new class of molecules that rival commonly used antibodies in both therapeutic and diagnostic applications. With the increasing application of aptamers as molecular probes for protein recognition, it is important to understand the molecular mechanism of aptamer–protein interaction. Recently, we developed a method of using atomic force microscopy (AFM) to study the single‐molecule rupture force of aptamer/protein complexes. In this work, we investigate further the unbinding dynamics of aptamer/protein complexes and their dissociation‐energy landscape by AFM. The dependence of single‐molecule force on the AFM loading rate was plotted for three aptamer/protein complexes and their dissociation rate constants, and other parameters characterizing their dissociation pathways were obtained. Furthermore, the single‐molecule force spectra of three aptamer/protein complexes were compared to those of the corresponding antibody/protein complexes in the same loading‐rate range. The results revealed two activation barriers and one intermediate state in the unbinding process of aptamer/protein complexes, which is different from the energy landscape of antibody/protein complexes. The results provide new information for the study of aptamer–protein interaction at the molecular level.