Bifunctional pyridyl alcohols with the bicyclo[3.3.0]octane scaffold in the asymmetric addition of diethylzinc to aldehydes

Some new pyridyl alcohols with the cis-bicyclo[3.3.0]octane scaffold were synthesized and used as chiral ligands for the enantioselective addition of diethylzinc to aldehydes. Ligands 4 were found to be far superior to the C₂-symmetric ligands 2 in terms of enantioselectivities. Quantitative yields and enantiomeric excesses of up to 92% were obtained when the ligand 4 was used. The carbonyl function in 4 proved to be beneficial for the high enantioselectivities in the addition of diethylzinc to aldehydes. Conversion of the carbonyl group into oxime or oxime ether group led to a sort of more active ligands, which catalyzed the same reaction with rate acceleration.     

Stereoselective synthesis of (Z)-fluoroalkenes directed to peptide isosteres: copper mediated reaction of trialkylaluminum with 4,4-difluoro-5-hydroxyallylic alcohol derivatives

Copper mediated alkyl-transfer reaction of trialkylaluminum (R₃Al) with (E)-4,4-difluoro-5-hydroxyallylic alcohol derivative smoothly proceeded to give the corresponding 2-alkylated 4-fluoro-5-hydroxyhomoallylic alcohol derivative with completely Z and 2,5-syn selective manner. Regio- and stereoselective conversion of the C5-hydroxyl group of the fluoroolefin thus obtained to amino group could be achieved through one-pot mesylation and azidation reaction.     

焙烧温度对合成低碳醇用Cu/Mn/Ni/ZrO2催化剂性能的影响

 研究了焙烧温度对合成低碳醇用Cu／Mn／Ni／ZrO2催化剂结构及催化性能的影响．随着焙烧温度的升高，催化剂的催化活性和产物分布都发生较大的变化．催化剂在较低的温度下焙烧，低温下反应液相产物的分布符合S－F方程；反应温度升高时，液相产物中主要是甲醇和异丁醇；在高温下焙烧的催化剂，其催化活性较低，但即使在较低的反应温度下，异丁醇在液相高级醇（C2＋OH）中也是主要的产物．结合其他的一些反应结果与XRD，BET，TPR及EXAFS等表征结果，认为焙烧温度使催化剂的结构发生了较大的变化，进而影响催化剂各组分之间的相互作用，从而使催化剂对合成低碳醇反应表现出不同的催化性能．     

Preparation of Silver Nanoparticles through Alcohol Reduction with Organoalkoxysilanes

Silver nanoparticles of narrow size distribution were prepared through the chemical reduction in an alcohol solution with several organoalkoxysilanes. In this system, organoalkoxysilanes served as a stabilizer, protecting silver nanoparticles from aggregation. The changes in size and morphology of colloidal silver nanoparticles were investigated with the addition of organoalkoxysilanes such as 3-aminopropyltriethoxysilane (APS), methyltriethoxysilane (MTS), phenyltrimethoxysilane (PTS), vinyltriethoxysilane (VTS), and 3-glycidoxypropyltrimethoxysilane (GPS) as stabilizers. The organic functional groups of organoalkoxysilanes interact with silver ions and clusters, which stabilize silver nanoparticles in the system. The silver nanoparticles obtained were characterized with transmission electron microscopy (TEM), UV-vis spectroscopy, etc.     

醇脱氢酶结构和作用机理研究进展

介绍了醇脱氢酶的种类, 酵母醇脱氢酶和肝醇脱氢酶等两类常用的醇脱氢酶的物理化学性质和活性位点结构. 归纳了对肝醇脱氢酶和酵母醇脱氢酶作用机理的研究, 重点评述了醇脱氢酶催化反应中的两个关键步骤质子转移和氢化物转移过程机理的研究进展.     

CeO2负载的Cu, Ir和Pd催化剂上的醇转移脱氢反应

 研究了CeO2负载的Cu, Ir和Pd催化剂上的醇转移脱氢反应. 利用催化剂体系脱氢和加氢功能的偶合,在较温和的反应条件下实现了二级脂肪醇的高选择性转移脱氢. 其中, Ir/CeO2催化剂表现出较高的催化活性,其TOF值达16.0 h-1.     

Highly sensitive spectrophotometric determination of trace amounts of platinum(IV) with the molybdate-basic dyes-poly(vinyl alcohol) system

Three highly sensitive spectrophotometric methods for the determination of platinum(IV) have been developed, based on its colour reactions with molybdate and basic dyes (BD) in aqueous solution in the presence of poly(vinyl alcohol). Platinum(IV) reacts with molybdate and BD to form ion — association complexes of composition (BD)₂[Pt (MoO₄)₃]. The molar absorptivities are between 6.83 × 10⁵ and 9.51 × 10⁵ dm³mol^–1cm^–1, the highest value being found with nile blue. Suitable conditions for the reactions and the effects of foreign ions were investigated. The methods can be applied to the spectrophotometric determination of trace amounts of platinum(IV) in some catalysts and ores.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

碳氟醇与阴离子表面活性剂的相互作用

测定了不同比例的C_(10)_H_(21)SO_4Na-C_3F_7CH_2OH、C_7F_(15)COONa-C_3H_7CH_2OH混合水溶液的表面张力,加入C_3F_7CH_2OH可增加阴离子表面活性剂的表面活性;在表面层中,C_3F_7CH_2OH与C_(10)H_(21)SO_4Na间分子相互作用比C_3F_7CH_2OH-C_7F_(15)COONa体系弱;这是由于CF链与CH链间“互疏”作用的结果;随着C_3F_7CH_2OH浓度增加,对C_(10)H_(21)SO_4Na胶团反离子结合度也随之增加。     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.