Nanostructure characterization of high k materials by spectroscopic ellipsometry

In this work, the optical and structural properties of high k materials such as tantalum oxide and titanium oxide were studied by spectroscopic ellipsometry, where a Tauc-Lorentz dispersion model based in one (amorphous films) or two oscillators (microcrystalline films) was used. The samples were deposited at room temperature by radio frequency magnetron sputtering and then annealed at temperatures from 100 to 500 °C. Concerning the tantalum oxide films, the increase of the annealing temperature, up to 500 °C does not change the amorphous nature of the films, increasing, however, their density. The same does not happen with the titanium oxide films that are microcrystalline, even when deposited at room temperature. Data concerning the use of a four-layer model based on one and two Tauc-Lorentz dispersions is also discussed, emphasizing its use for the detection of an amorphous incubation layer, normally present on microcrystalline films grown by sputtering.     

Effect of Hydrolysis Conditions on the Direct Formation of Nanoparticles of Ceria–Zirconia Solid Solutions from Acidic Aqueous Solutions

The effect of the cation concentration, hydrolysis temperature, and composition in the CeO₂–ZrO₂ system on the direct precipitation of ceria–zirconia solid solutions and the structure of the precipitates from acidic aqueous solutions of (NH₄)₂Ce(NO₃)₆ and ZrOCl₂ by hydrolysis under hydrothermal conditions were investigated. Nanometer-sized (8–10 nm) ceria–zirconia solid solution particles in a composition range of 0 to 60 mol% ZrO₂ were directly precipitated from the solutions with total metal cation concentration less than 0.2 mol/dm³ by simultaneous thermal hydrolysis at 150–240°C. The crystalline phase of the precipitates gradually changed from cubic and/or tetragonal to monoclinic with increasing the cation concentration of the solution from 0.2 to 0.8 mol/dm³ at the starting composition of 50 mol% ZrO₂ under hydrolysis condition of 150°C for 48 h, which was attributed to decrease in the supply of hydrolyzed Ce component caused by decrease in the hydrolysis ratio of (NH₄)₂Ce(NO₃)₆. Ceria–zirconia solid solutions containing large amount of ZrO₂ maintained high specific surface area and small-sized crystallite after heat-treatment at 900–1000°C for 1 h.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

球形SnO2 纳米微粒的合成及形成机理分析

以SnCl4·5H2 O为主要原料 ,用溶剂热技术在油酸体系中成功地合成了球形SnO2 纳米微粒 ,在无水乙醇体系中合成了菱形的SnO2 纳米微粒 .通过X射线粉末衍射 (XRD) ,选区电子衍射 (SAED)和透射电镜 (TEM )对两种产物进行了表征 ,并对两种产物的形成机理进行了分析 .透射电镜 (TEM)结果表明 :在油酸体系中得到了平均尺寸约为 3.5nm的球形SnO2 纳米微粒 ,此微粒趋向于特殊高的比表面积 ,适合于作气敏探测器材料方面的应用     

Al/Al2O3P金属基复合材料的静动态压缩性能及损伤分析

用气压浸渗工艺制备了体积分数40％～50％Al2O3颗粒增强纯铝基复合材料，使用了4种不同尺寸的Al2O3颗粒，其平均粒径分别为5μm、10μm、30μm和60μm．测定了这些复合材料的静、动态压缩性能，并通过材料压缩前后密度变化的测量定量表征了材料的累计损伤，结果表明，与基体材料相似，这些复合材料表现出明显的应变率敏感性；当增强颗粒平均粒径小于60μm时，材料的累计损伤基本与应变率无关，而主要取决于材料的应变．材料中颗粒的破裂主要是由颗粒间的相互作用引起的．较小尺寸颗粒增强的复合材料具有较高的流动应力和较小的累计损伤，并随着颗粒体积分数的增加，材料的流动应力和损伤率都相应增加．     

侵彻环境下两种钨合金的细观响应特性

本文实验发现具有较大密度和较高速度的93W钨合金长杆模拟弹的穿靶深度反而比密度较小，速度较低的90W钨合金长杆弹的穿靶深度小．针对这一现象，本文从两种材料在侵彻环境下的细观响应特性的差异上给出了有实验根据的合理分析，结论是90W在侵彻环境下较易于形成绝热剪切带，从而在弹头部发生“自锐化”效应所致．     

高温超导体的结构组装

 在总结铜氧化物高温超导体晶体结构特点的基础上，提出了以无限层结构Cu-O钙钛矿为核心的结构组装概念，通过和相关结构的外延组合，衍生出了高温超导体的主要晶体构型。进一步运用此观念，建立了新的三元数命名法，并对高温超导体的晶体结构进行了归类。     

板状激光振荡介质温度场和应力场的数值模拟

以非均匀内热源模型为基础,并考虑材料的导热系数和热膨胀系数的温度相关性,利用有限元方法,对板状激光振荡介质在不同功率和冷却强度下的温度和热应力分布进行了数值模拟及分析。根据计算结果提出了最大有效换热系数的概念,指出换热系数超过最大有效换热系数后,继续强化传热对减小高功率激光器的热效应已无明显效果。以此得出采用常规冷却技术所允许的最大泵浦加热功率。     

A theoretical analysis of the TiO2/Sn doped (1 1 0) surface properties

We have used the periodic quantum-mechanical method with density functional theory at the B3LYP level in order to study TiO₂/Sn doped (1 1 0) surfaces and have investigated the structural, electronic and energy band properties of these oxides. Our calculated relaxation directions for TiO₂ is the experimental one and is also in agreement with other theoretical results. We also observe for the doped systems relaxation of lattice positions of the atoms. Modification of Sn, O and Ti charges depend on the planes and positions of the substituted atoms. Doping can modify the Fermi levels, energy gaps as well as the localization and composition of both valence and conduction band main components. Doping can also modify the chemical, electronic and optical properties of these oxides surfaces increasing their suitability for use as gas sensors and optoelectronic devices.     

高压沿面放电烟气脱硫技术动态实验研究

本文针对高压沿面放电活化气体的烟气脱硫技术,在静态实验研究的基础上进行了实验室冷态动态的实验研究。设计了便于反应和测量的动态实验装置。实验解释了电子束法脱硫技术中导致氨气泄漏的部分原因,验证了高压沿面放电脱硫技术可以在较低的运行电压下,达到提高脱硫效率,减少氨气泄漏的作用。