Monolayer films of PS-b-PEO diblock copolymers at the air/water- and an oil/water-interface

 Amphiphilic diblock copolymers consisting of a hydrophobic polystyrene block (PS) and a hydrophilic poly(ethylene oxide) block (PEO) with block sizes of 1000 or 3000 g/mol for both blocks were studied at the air/water and toluene/water interface. Measurements of the film pressure π of spread monolayers at the water surface reveal two limiting regimes of the π−a _m isotherms, in which the mean molecular area a _m is determined either by the size of the hydrophilic or the hydrophobic blocks of the PS-PEO molecules. The interfacial activity of the block copolymers at the toluene/water interface was studied by measuring the interfacial tension σ over a wide range of concentrations. Pronounced differences in the temperature dependence of the interfacial tension were observed, depending mostly on the block length of the hydrophilic PEO block. From the temperature dependence of σ it is inferred that for the block copolymers with the PEO block size of 3000 g/mol the phase inversion temperature (PIT) is well above 60 °C while for those with a PEO block size of 1000 g/mol the PIT is below or near 25 °C in the toluene/water system. Received: 5 February 1998 Accepted: 16 February 1998     

Recent contributions of high resolution gas chromatography to the analysis of environmental hydrocarbons

Analyses of hydrocarbon fractions from different areas of the marine environment are described to illustrate the possibilities and limitations of high resolution gas chromatography (HRGC) in the analysis of environmental samples. Examples are given of dissolved, particulate, and sedimentary hydrocarbons and organochlorine compounds; the importance of an adequate sampling of the marine environment is stressed. HR chromatographic profiles obtained in two columns of low and high polarity (SE-52 and PEG 20M) permit the sources and transport pathways of both natural and anthropogenic hydrocarbons to be traced. Analysis of tissues of marine mammals, which metabolize or excrete many of the biogenic and petrogenic hydrocarbons present in other areas of the marine environment, may provide an opportunity to obtain relatively clean profiles of many anthropogenic compounds of interest. The plotting of mass chromatograms from data compiled by COM-GC-MS remains the most appropriate method for the conclusive indentification of these compounds.     

Comparative Evaluation of CE and HPLC for Determination of Cotinine in Human Urine

Two rapid and popular methods—capillary electrophoresis (CE) and high-performance liquid chromatography (HPLC) have been compared for analysis of cotinine in human urine. Cotinine was analyzed in less than 7 min, with detection limits of 5 and 3.2 ng mL⁻¹ for CE and HPLC, respectively. The performance of the methods was evaluated in terms of sensitivity, specificity, precision, accuracy, and limits of detection and quantification. Calibration plots were linear in the range 50–4,000 ng mL⁻¹, at least, and mean recoveries were satisfactory for both techniques. The methods were successfully used for quantification of cotinine in urine.     

Vapor pressure measurement for water,methanol, ethanol,and their binary mixtures in the presence of an ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

Vapor pressure data were measured for water, methanol and ethanol as well as their binary mixtures with an ionic liquid (IL) 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM][DMP]) at varying temperature and IL-content ranging from mass fraction of 0.10–0.70 by a quasi-static method. The vapor pressure data for the IL-containing binary systems were correlated using NRTL equation with average absolute relative deviation (ARD) within 0.0076, and the binary NRTL parameters was used for predicting the vapor pressure of the IL-containing ternary systems with reasonable accuracy. In addition, the infinite activity coefficients of solvents in [EMIM][DMP] and isobaric vapor–liquid equilibrium for IL-containing ternary systems at 101.325 kPa and mass fraction of IL being 0.5 were predicted with the regressed NRTL parameters. The results indicate that ionic liquid [EMIM][DMP] can depress the volatility of the solvents of water, methanol and ethanol but to a varying degree, leading to the variation of relative volatility of a solvent and even removal of azeotrope for water–ethanol mixture.     

Synthesis and electrochemical properties of spinel LiMn2O4 prepared by the rheological phase method

Pure-phase and well-crystallized spinel LiMn₂O₄ powders were successfully synthesized by a simple rheological phase method. The thermal behavior and structure properties of the powders prepared by the rheological phase method compared with the solid-state reaction were investigated by thermogravimetry, powder X-ray diffraction , scanning electron microscopy and transmission electron microscopy. According to the results of the electrochemical tests, it is obvious that the sample resulting from the rheological phase method shows higher discharge capacity and better cycling stability than one formed in the solid-state reaction. The cyclic voltammogram and columbic efficiency curves also confirm that the product by the rheological phase method has a good cycling performance due to its fine cubic spinel structure and morphology.     

Preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases using phosphonate as spacers and their application to the separation of fullerenes

A novel method was proposed for the preparation of pyrenebutyric acid-modified magnesia-zirconia stationary phases. Pyrenebutyric acid was grafted to magnesia-zirconia composites with different pore sizes via the sodium salt of cis-(3-methyloxiranyl)phosphonic acid (fosfomycin) as spacers. Aminated fosfomycin was first absorbed onto the surface of magnesia-zirconia composites during the preliminary step to provide amino and hydroxy reactive sites. And then the pyrenebutyric acid was covalently attached to the amine or hydroxyl groups via amide or ester bonds. The resulting stationary phases were characterized by elemental analysis, diffused reflectance FT-IR, nitrogen adsorption analysis and ¹³C solid state NMR spectra. The HPLC separation of fullerenes on the new stationary phases with different pore sizes was also investigated. The chromatographic performance showed a dependence on the pore size of the magnesia-zirconia matrix. Little retention of fullerenes was observed on the stationary phase with pore sizes about 4.5 nm. However, on the modified magnesia-zirconia with pore sizes about 10 nm, selectivity factors (α) for C₇₀/C₆₀ separation were determined to be 1.76, 2.29, 2.41, 3.10, with carbon disulfide, chlorobenzene, xylene and toluene as mobile phases, respectively. And the high solubility of fullerenes in these solvents dramatically increased the overall potential with regard to preparative fullerene purification. Among the reported stationary phases with pyrene ligands, the pyrenebutyric acid-modified magnesia-zirconia (PYB-F-(ZrO₂-MgO)) with larger pore sizes exhibited the best selectivity for fullerenes. The thermodynamic and kinetic behavior of fullerenes was also examined.     

有机聚合物整体柱及其在生物大分子色谱分离中的应用

整体柱是近年发展起来的一种新型的色谱分离分析技术，与传统的色谱柱相比，具有制作简单、背压低、分辨率高、柱容量大等优点。本文介绍了有机聚合物整体柱及其在生物大分子色谱分离领域的应用，分析了其存在的问题，并展望了其应用前景。     

Determination of thermodynamic properties of macroporous glycidyl methacrylate‐based copolymers by inverse gas chromatography

Macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME) was synthesized by suspension copolymerization and modified by ring‐opening reaction of the pendant epoxy groups with ethylene diamine (EDA). Inverse gas chromatography (IGC) at infinite dilution was applied to determine the thermodynamic interactions of PGME and modified copolymer, PGME‐en. The specific surface areas of the initial and modified copolymer samples were determined by the BET method, from low‐temperature nitrogen adsorption isotherms. The specific retention volumes, V, of 10 organic compounds of different chemical nature and polarity (nonpolar, donor, or acceptor) were determined in the temperature range 333–413 K. The weight fraction activity coefficients of test sorbates, , and Flory–Huggins interaction parameters, , were calculated and discussed in terms of interactions of sorbates with PGME and PGME‐en. Also, the partial molar free energy, , partial molar heat of mixing, , sorption molar free energy, ΔG, sorption enthalpy ΔH, and sorption entropy, ΔS, were calculated. Glass transitions in PGME and PGME‐en, determined from IGC data, were observed in the temperature range 373–393 K and 363–373 K, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2524–2533, 2005     

超高效液相色谱-三重四极杆质谱法测定血浆和尿液中马桑亭和马桑宁

建立了超高效液相色谱-三重四极杆质谱联用技术测定血浆和尿液中马桑中毒标志物马桑亭和马桑宁的方法。血浆和尿液样品经固相支持液液萃取法提取净化后，溶于15%（v/v）甲醇水溶液中，以Cortecs C₁₈色谱柱（100 mm×2.1 mm，1.6 μm）作为分析柱进行分离，电喷雾负离子多反应监测（MRM）模式下检测，以氟苯尼考作为内标物，基质工作曲线内标法定量。血浆和尿液中马桑亭和马桑宁的平均加标回收率为86.2%~110%，相对标准偏差为5.1%~14.6%（n=6），血浆中马桑亭和马桑宁的检出限（S/N=3）分别为0.01 μg/L和0.1 μg/L，尿液中马桑亭和马桑宁的检出限分别为0.03 μg/L和0.3 μg/L。本法简单、灵敏、准确，可用于血浆和尿液中马桑亭和马桑宁的中毒检测。     

全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱法检测植物源性食品中34种农药残留

建立了全自动QuEChERS样品制备系统结合高效液相色谱-串联质谱（HPLC-MS/MS）同时检测植物源性食品中34种农药残留的分析方法。方法利用全自动QuEChERS样品制备系统涡旋振动和离心功能，将手动QuEChERS方法中样品提取和分散固相萃取相结合；优化了操作参数及前处理步骤，在多反应监测（MRM）模式下检测，基质匹配外标法定量。从方法学验证角度对全自动QuEChERS法与手动QuEChERS法进行了比较。结果表明：该方法中大多数农药在一定范围内呈现良好的线性关系，相关系数（R²）均大于0.99，检出限为0.76~3.60 μg/kg，定量限为2.28~10.80 μg/kg，加标回收率为53.0%~125.2%，相对标准偏差（RSD）<15.9%（n=5）。该方法与手动QuEChERS法的方法验证比对结果显示差异不明显，用于植物源性食品中多农药残留检测可有效降低劳动强度和出错概率。