双1:11镝的硅钼杂多酸的液/液界面电化学研究

用循环线性电流扫描计时电位法和循环伏安法研究了双1∶11镝的硅钼杂多酸阴离子在水／硝基苯界面的转移。在pH＝1．1～5．3时，转移离子为H9Dy（SiMo11O39）24－．根据循环伏安结果计算得转移离子的标准电位差和Gibbs转移自由能分别为0．102V和－39．5kJ•ml-1，并由循环线性电流扫描计时电位法计算了转移离子的有关动力学参数，H9Dy（SiMo11O39）24-在水／硝基苯界面的转移属准可逆转移．     

杂多阴离子柱撑锰铝水滑石的合成、表征及催化性能

杂多阴离子柱撑锰铝水滑石的合成、表征及催化性能刘继广，孙铁，蒋大振（吉林大学化学系，长春１３００２３）关键词杂多阴离子，柱撑，锰铝水滑石，异丁烷，烷基化类水滑石化合物属于阴离子型粘土‘’‘，其中心金属离子Ｍ２＋或Ｍ３＋及平衡阴离子可根据需要进行改变．...     

Synthesis and shapes of gold nanoparticles by using transition metal monosubstituted heteropolyanions as photocatalysts and stabilizers

Gold nanoparticles were prepared via a simple photoreduction technique in the presence of transition metal monosubstituted Keggin heteropolyanions (PW11M, M= Cu²⁺, Ni²⁺, Zn²⁺, Fe³⁺), in which PW11M acted as reducing agent, photocatalyst and stabilizer. The results indicated that the formation rate and morphology of the nanoparticles strongly depended on the kind of transition metal substituted in heteropolyacid and the preparation conditions, such as irradiation time and propan-2-ol amount. The photoreduction rates of PW11Zn and PW11Fe were faster than those of PW11Ni and PW11Cu. The shapes of the nanoparticles synthesized in the presence of PW11Fe and PW11Zn were nearly uniform spheres, whereas the morphologies of the nanoparticles synthesized in the presence of PW11Ni and PW11Cu were found to contain a mixture of flat triangular/hexagonal structures as well as spheres. Increases in the irradiation time and the propan-2-ol amount could make the morphology of nanoparticles uniform and shorten the formation time of the nanoparticles. __________ Translated from Chinese Journal of Applied Chemistry, 2007, 24(7) (in Chinese)     

Das erste KEGGIN-Anion mit tetraedrischer. Kupfer(II)—Sauerstoff-Koordination: [α-Cu0,4(H2)0,6O4W12O36]6−

The First KEGGIN-Anion with Tetrahedral Coordination of Copper(II)-Oxygen: [α-Cu_0,4(H₂)_0.6O₄W₁₂O₃₆]^6? The solution of the Cu^II-containing heteropolyanion was prepared starting from an aqueous solution of Na₂WO₄, adjusting to pH 5–6 by adding slowly a solution of Cu(NO₃)₂ in HNO₃. The addition of the corresponding amount of N(CH₃)₄Br to the concentrated solution led to the crystallization of the greenish-yellow mixed crystals (TMA)₆[α-Cu_0.4(H₂)_0.6O₄W₁₂O₃₆] · 9 H₂O. After repeated recrystallization it has been investigated by chemical, spectroscopic (IR/Raman, UV, ¹⁸³W/¹H-NMR, ESR) and X-ray diffraction methods (monoclinic; space group P2₁; a = 13.117(4), b = 21.466(4), c = 13.223(3) Å, β = 91.60°; Z = 2; D_c = 3.041 g · cm^?3; R = 8.0%). The distances of the four “tetrahedral” oxygen atoms to the position (0, 0, 0) range from 1.67 to 1.93 Å. The alternative occupation of the central KEGGIN position with copper(II) and two protons, respectively, accounts for the different distances. The prepared solid solution represents the first example for the tetrahedral copper(II)-oxygen coordination in any heteropolyanion compound.     

过渡金属杂多酸PW11M光催化还原制备金纳米粒子及其形貌

以掺杂不同过渡金属离子的Keggin结构杂多酸为光催化剂和还原剂,通过光化学还原法制备金纳米粒子。研究发现,纳米金的形成速度、形貌与杂多化合物中掺杂的过渡金属种类、光照时间以及异丙醇的用量等有很大的关系。相同实验条件下,PW11Zn、PW11Fe的光催化还原速率明显高于PW11Ni、PW11Cu,且前2种杂多化合物容易制得均匀而稳定性好的球形颗粒,而后2种则易形成一些三角形或六边形片状纳米粒子;增加紫外光照时间,一定范围内有利于纳米金的形成及形貌的完整;异丙醇用量的增加可以缩短反应时间,提高纳米颗粒的均匀性和稳定性。     

Dodecatungstocobaltate heteropolyanion encapsulation into MIL‐101(Cr) metal–organic framework scaffold provides a highly efficient heterogeneous catalyst for methanolysis of epoxides

A heterogeneous catalyst was synthesized by encapsulation of a Keggin‐type heteropolytungstate, potassium dodecatungstocobaltate trihydrate, K₅[CoW₁₂O₄₀]·(Co‐POM), into chromium(III) terephthalate (MIL‐101). Encapsulation was achieved via a ‘build bottle around ship’ strategy in aqueous media, following a hydrothermal method. The structure of the resulting crystalline solid was characterized using X‐ray diffraction, correlated with Fourier transform infrared and UV–visible spectroscopy. The metal content was analysed using optical emission spectroscopy. Transmission electron microscopy was used to measure particle size and N₂ adsorption in a Brunauer–Emmett–Teller instrument to characterize the specific surface area. The catalytic activity was investigated using methanolysis of epoxides under mild conditions as a test reaction. The turnover frequency of the heterogeneous Co‐POM@MIL‐101 catalyst was more than 20 times higher than that of the homogeneous Co‐POM catalyst. The Co‐POM@MIL‐101 catalyst was reused several times with negligible leaching of Co‐POM and with no considerable loss of its initial efficiency. The simplicity of preparation, extraordinary stability and high reactivity make Co‐POM@MIL‐101 an exceptional catalytic matrix that is easily separable from reaction media.     

稀土杂多化合物在溶液中的￣（183）W核磁共振表征

~（１８３）Ｗ核磁共振研究确认，Ｌａ（ＡｓＷ_（１１））_２、Ｌａｍ（Ａｓ_２Ｗ_（１７））_２在溶液中仍保持其四方反棱柱的Ｃ_３结构，Ｌａ（ＳｉＷ_９ＭＯ_２）_２阴离子中，２个Ｍｏ原子取代了２个等价的Ｗ原子，在穴状杂多阴离子ＬｎＡｓ_４Ｗ_（１０）和ＬｎＳｂ_９Ｗ_（２１）中，稀土离子占据中心Ｓ_１位置，ＳｉＷ_９与稀土离子生成（ＬｎＯ）_３（ＳｉＷ_９）_２型杂多阴离子。     

Keggin型铬取代杂多阴离子/D301R可见光催化性能

将Keggin型铬取代磷钨杂多阴离子PW11O39Cr(Ⅲ)(H2O)4-(PW11Cr)负载于弱碱性阴离子交换树脂D301R表面,制备了固体光催化剂PW11Cr/D301R,并以模型污染物罗丹明B(RhB)的降解为探针评估了该催化剂的可见光催化活性,讨论了光催化反应机理,同时考察了催化剂剂量、溶液pH值和溶液中常见离子对RhB可见光催化降解反应的影响以及催化剂的稳定性。 实验结果表明,当PW11Cr/D301R的剂量为100 mg时,10 μmol/L RhB水溶液暴露在200 W金卤灯下进行照射,RhB完全降解所需的时间仅为30 min,比PW11Cr均相体系缩短了3倍;反应180 min总有机碳(TOC)去除率约为84%。 催化剂剂量、溶液pH值和溶液中存在的Cl-、SO2-4和PO3-4对RhB光催化降解反应的速率均有一定影响。 催化剂循环实验显示经循环使用7次后催化剂的活性几乎没有损失。     

硅钼钨杂多阴离子-聚吡咯膜修饰电极的制备及其电化学性质研究

用电位扫描方法将混配型杂多阴离子α－ ＳｉＭｏ３ Ｗ９Ｏ４０４－ （ 简写为α－ ＳｉＭｏ３Ｗ９） 催化剂固定在导电聚吡咯膜电极上,从而制得具有表面功能的α－ ＳｉＭｏ３Ｗ９ 掺杂的聚吡咯膜修饰玻碳电极．该电极具有良好的电化学活性和稳定性,并对ＮＯ２－ 的还原起电催化作用．实验结果表明,α－ ＳｉＭｏ３Ｗ９ 在膜中的还原过程由溶液中的三步单电子还原转化为一步双电子和一步单电子还原．     

Hydroprocessing catalysts based on transition metal sulfides prepared from Anderson and dimeric Co2Mo10-heteropolyanions. A review

Hydroprocessing catalysts based on transition metal sulfides have been extensively used worldwide in refineries for upgrading heavy fractions to better quality fuels. The present work reviews the studies dealing with Anderson heteropolyanions (HPAs) and the derived dimeric structure for synthesizing hydrotreating catalysts. The development of new preparation methods based on HPA catalysts led to efficient catalytic systems due to better sulfidation allowed by a better dispersion of the oxidic precursor even at high metallic loadings. The increase of the Co/Mo ratio in the heteropolycompounds up to 0.5 was possible due to the formation of dimer cobalt salt. The association of Co and Mo at the molecular level in the same heteropolycompound preserved after the drying step during the catalyst preparation ensured the efficiency of the promoting effect with a higher quantity of the CoMoS active phase. This HPA-based system was further improved by the simultaneous use of HPAs and chelating agents.