DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

纳米级金膜微电极的制作,表征及异相催化反应

报道了纳米级金膜微电极的制作方法，用ＸＰＳ及ＳＥＭ对电极表面进行了表征，考察了该电极的循环伏安及计时电流特性，在聚吡咯修饰微带金电极上成功地实现了葡萄糖氧化酶和电子传递媒体Ｆｅ（ＣＮ）６＾３－的同时固定，并研究了ＧＯＤ／Ｆｅ（ＣＮ）６＾３－／ＰＰｙ微酶电极对葡萄糖的响应，稳态响应电流与葡萄糖浓度之间存在Ｍｉｃｈｅａｌｉｓ－Ｍｅｎｔｅｎ动力学特征。     

Influence of redox properties on the activity of iron oxide catalysts in dehydrogenation of propane with CO2

Different Fe-containing catalysts (pure Fe₂O₃, Fe₂O₃ supported on active carbon or g-Al₂O₃, and hydrotalcite derived Mg-Fe oxides) were examined in the dehydrogenation of propane performed in an Ar or CO₂ atmosphere at 873 K. A promoting effect of carbon dioxide was found for the Fe₂O₃ and Fe₂O₃/AC samples. The catalytic results are discussed in terms of redox properties of the catalysts determined by temperature-programmed reduction (TPR). This revised version was published online in August 2006 with corrections to the Cover Date.     

硫化态K—Mo合成低碳醇催化剂的制备条件和载体效应研究

用浸渍法制备以KCl为助剂的ZrO_2、γ-Al_2O_3和SiO_2负载硫化态钼基催化剂,研究了钼和助剂钾两种组分浸渍顺序、助剂含量、载体差别以及浸渍溶液的酸碱性对催化剂上CO加氢合成低碳混合醇性能的影响。ZrO_2按先钼后钾、γ-Al_2O_3和SiO_2则按相反的顺序浸渍两种组分、且K/Mo原子比分别为0.5,0.8和1.0制备催化剂,其合成醇活性最佳。由于载体性质的差异,K-Mo/SiO_2、特别是K-Mo/ZrO_2的合成醇活性强烈依赖于钾助剂含量。而K-Mo/SiO_2在较宽的钾含量范围内,其活性差别不明显。适当选择较高碱性的浸渍溶液制备K-Mo/γ-Al_2O_3催化剂,有利于醇活性的提高。     

Synthesis of an enzyme-like imprinted polymer with the substrate as the template, and its catalytic properties under aqueous conditions

Transition state analogues (TSAs) have long been regarded as ideal templates for the preparation of catalytically active synthetic imprinted polymers. In the current work, however, a new type of molecularly imprinted polymer (MIP) was synthesized with the substrate (homovanillic acid, HVA) as the template and hemin introduced as the catalytic center, with the use of plural functional monomers to prepare the active sites. The MIP successfully mimicked natural peroxidase, suggesting that it may not be imperative to employ a TSA as the template when preparing enzyme-like imprinted polymers and that the imprinted polymer matrix provided an advantageous microenvironment around the catalytic center (hemin), essentially similar to that supplied by apo-proteins in natural enzymes. Significantly, by taking advantage of the special structure of hemin and multiple-site interactions provided by several functional monomers, the intrinsic difficulties for MIPs in recognizing template molecules in polar solutions were overcome. The newly developed polymer showed considerable recognizing ability toward HVA, catalytic activity, substrate specificity and also stability, which are the merits lacked by the natural peroxidase. Meanwhile, the ease of recovery and reuse the MIP implies the potential for industrial application.     

分子水平上低碳烷烃催化选择氧化的初步研究

烃类选择氧化在石油化工中极其重要.近二十多年来,随着石油化工原料逐步从烯烃、芳烃等不饱和烃向资源丰富和价格相对低廉的烷烃的转化,研究烷烃的氧化活化和定向转化来取代相应的烯烃和芳烃工艺具有非常重要的学术意义和工业价值.因而,烷烃的选择活化和氧化得到了世界范围内的     

Simplistic modeling approach to heterogeneous dilute-acid hydrolysis of cellulose microcrystallites

The classic kinetic model for cellulose hydrolysis is often referred to as pseudo-homogeneous, a term revealing the insight that the process is actually heterogeneous. During the past 10–15 yr, the shortcomings of this model have been demonstrated in various studies and the interest in the heterogeneous aspects has increased. The present work presents a simplistic model in which the intrinsic, heterogeneous hydrolysis and transport rates are coupled by the assumption of a constant glucosidic surface concentration. The mechanisms affecting these two rates are largely unknown, but the model serves as a guideline for further exploration of the process.     

Comparative quantum chemical studies in the framework of Gaussian approximations of the acidic characteristics of the simplest zeolite clusters and of the sulfuric acid molecule

Different variants of the Gaussian approximation, giving the energetic characteristics of molecules with chemical accuracy (±2 kcal mol^–1), are applied to calculations of the deprotonation energy of the sulfuric acid molecule in the gas phase as well as to the simplest clusters modeling the bridging hydroxyl groups in zeolites, The conclusion is made that the bridging hydroxyls am more acidic than the sulfuric acid molecule. The estimated range of deprotonation energy in zeolites (275±15 kcal mol^–1), is in good agreement with experimental data and with results ofab initio calculations for extended models including several tens of atoms. The effects of the quality of the basis set and electron correlation on deprotonation energy are also discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 7, pp. 1641–1647, July, 1996.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

Development of chromium-free iron-based catalysts for high-temperature water-gas shift reaction

Chromium-free iron-based catalysts were prepared and studied in regard to their performance in the high-temperature water-gas shift reaction (HTS). The effects of various catalyst preparation variables (i.e., Fe/promoter ratio, pH of precipitation medium, calcination and reduction temperatures) and preparation methods were investigated. Aluminum is a potential chromium replacement in HTS catalysts. Further improvement in WGS activity of Fe–Al catalysts can be achieved by the addition of small amounts of copper or cobalt. Catalysts were characterized using BET surface area measurements, temperature-programmed reduction (TPR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). As a textural promoter, aluminum and chromium prevent the sintering of iron oxides and stabilize magnetite phase by retarding its further reduction to FeO and metallic Fe. The promotional effect of Cu is found to be strongly dependent on the preparation method.