胺烷基二茂铁衍生物的合成及其结构与性质的研究

选择不同的胺组分，利用改进的Ugi法合成了一系列含有胺烷基的二茂铁衍生物，并对其结构和性质进行了研究。     

利用分子对称性简化天然有机产物合成设计的策略

本文综述了利用分子对称性简化天然有机产物合成设计的策略,讨论了具有下述四种对称性的分子的合成:一、对称中心和旋转对称轴;二、对称平面;三、潜在的对称性;四、局部的对称性。     

亚磺化脱卤试剂在有机合成中的应用

本文综述了亚磺化脱卤试剂在有机合成中的应用。特别是氟烷基化反应中的应用。     

High-pressure structure of Li2CO3

The high-pressure behavior of Li₂CO₃ is studied up to 25 GPa with synchrotron angle-dispersive powder X-ray diffraction in diamond anvil cells and synthesis using a multi-anvil apparatus. A new non-quenchable hexagonal polymorph (P6₃/mcm, Z=2) occurs above 10 GPa with carbonate groups in a staggered configuration along the c-axis—a=4.4568(2) Å and c=5.1254(6) Å at 10 GPa. Two columns of face-shared distorted octahedra around the Li atoms are linked through octahedral edges. The oxygen atoms are coordinated to one carbon atom and four lithium atoms to form a distorted square pyramid. Splittings of X-ray reflections for the new polymorph observed above about 22 GPa under non-hydrostatic conditions arise from orthorhombic or monoclinic distortions of the hexagonal lattice. The results of this study are discussed in relation to the structural features found in other Me₂CO₃ carbonates (Me: Na, K, Rb, Cs) at atmospheric conditions.     

焙烧温度对合成低碳醇用Cu/Mn/Ni/ZrO2催化剂性能的影响

 研究了焙烧温度对合成低碳醇用Cu／Mn／Ni／ZrO2催化剂结构及催化性能的影响．随着焙烧温度的升高，催化剂的催化活性和产物分布都发生较大的变化．催化剂在较低的温度下焙烧，低温下反应液相产物的分布符合S－F方程；反应温度升高时，液相产物中主要是甲醇和异丁醇；在高温下焙烧的催化剂，其催化活性较低，但即使在较低的反应温度下，异丁醇在液相高级醇（C2＋OH）中也是主要的产物．结合其他的一些反应结果与XRD，BET，TPR及EXAFS等表征结果，认为焙烧温度使催化剂的结构发生了较大的变化，进而影响催化剂各组分之间的相互作用，从而使催化剂对合成低碳醇反应表现出不同的催化性能．     

十八烷基取代吲哚啉螺吡喃衍生物的合成及光谱性质

螺吡喃类化台物是一种重要的光响应分子,它在光信息存储技术中作为光盘材料具有广阔的应用前景。这类化合物在不同介质中的光谱、光电和光致变色性质引起了众多科学家的兴趣,并且已有大量研究工作报道。近年来,光致变色固体膜,特别是光致变色化合物的LB膜和超分子膜的特性引起了广泛的关注。因为在这种状态下,化合物分子具     

化合物库的组合技巧和组合合成

从化合物库的组合技巧和组合合成方法两个方面探讨了组合化学及其在药物开发中的应用。     

双核钴配合物(RC_2R′)CO_2(CO)_6_n[P(OEt)_3]_n的合成与结构

PR_3可取代(RC_2R′)Co_2(CO)_6中的CO生成相应的取代配合物(RC_2R′)CO_2(CO)_(6-n)(PR_3)n: (RC_2R′)Co_2(CO)_6 +nPR_3→ (RC_2R′)Co_2(CO)_(6-n)(PR_3)n已经利用此反应合成了一系列PR_3取代配合物,但P(OEt)_3的取代配合物则未见报     

Reaction of hexafluoropropylene and its oligomers with acetone oxime

Reactions of perfluoropropylene and its oligomers with acetone oxime in the presence of a base afford perfluoroalkyl and/or perfluoroalkenyl ethers of acetone oxime. When heated to 100 °C, the 3-perfluoro-2-methyl-2-pentenyl ether of acetone oxime (3) is quantitatively converted to 4-hydroxy-3-methyl-5,5-bistrifluoromethyl-4-pentafluoroethyl-1-pyrroline (4), the structure of which was established by X-ray diffraction analysis. A convenient one-stage synthesis of perfluoro-3-isopropyl-4-methyl-3-penten-2-one (7) was proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1068–1072, June, 1994.     

Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.