Rotational Motion of a Solute Molecule in a Highly Viscous Liquid Studied byC NMR: 1,3-Dibromoadamantane in Polymeric Chlorotrifluoroethene

The viscosity-dependent retarding effect of a polymeric solvent on the rotation of small solute molecules is investigated by¹³C NMR relaxation measurements. It is found that the relaxation data of 1,3-dibromoadamantane in highly viscous polymeric chlorotrifluoroethene can be explained neither by isotropic nor by realistic anisotropic tumbling in a single environment. The experimental data are rationalized in terms of fast exchange between at least two environments with correlation times differing by up to two orders of magnitude. The study shows that a uniform retardation of molecular tumbling by a polymeric solvent, desirable for shifting the NMR observation window in studies of intramolecular mobility, is not always feasible.     

颗粒速度在颗粒流稀疏流-密集流转变中的作用

用实验和计算模拟的方法研究了颗粒流中的颗粒速度与颗粒流特性的关系.实验研究发现当入口流量固定时，在出口上方高速运动的颗粒会使颗粒流由稀疏流向密集流转变的临界出口尺寸变小.当颗粒流转变为密集流后，颗粒速度的作用被出口上方的颗粒堆积区所消耗，最终变得与颗粒速度无关.二维分子动力学模拟计算得到了与实验相同的结论.通过二维分子动力学模拟计算，还给出了不同颗粒速度下体系的密度和速率在空间的分布图.这些分布图显示随着颗粒到达出口上方的瞬间速度的不同，颗粒堆积区的密度和高度均会改变，并最终导致颗粒流流动状态的改变. 关键词： 颗粒流 颗粒气体 分子动力学模拟     

分子束外延生长赝配高电子迁移率超高速微结构功能材料里深中心识别

应用深能级瞬态谱(DLTS)技术研究分子束外延(MBE)生长的highelectronmobilitytransistors(HEMT)和Pseudomorphichighelectronmobilitytransistors(PHEMT)结构深中心行为.样品的DLTS谱表明,在HEMT和PHEMT结构的nAlGaAs层里存在着较大浓度(1015-1017cm-3)和俘获截面(10-16cm2)的近禁带中部电子陷阱.它们可能与AlGaAs层的氧含量有关.同时还观察到PHEMT结构晶格不匹配的AlGaAsInGaAsGaAs系统在AlGaAs里产生的应力引起DX中心(与硅有关)能级位置的有序移动.其移动量可作为应力大小的一个判据,表明DLTS技术是定性识别此应力的可靠和简便的工具. 关键词： 分子束外延生长 高电子迁移率超高速微结构功能材料 深中心     

Effect of reaction conditions on the molecular weight and polydispersity of linear poly(arylene ether phosphine oxide)s prepared from an AB monomer

A thorough study of the polymerization behavior of 4‐fluoro‐4′‐hydroxytriphenyl‐phosphine oxide, 2 , under nucleophilic aromatic substitution reactions has been carried out. The synthesis of 2 was achieved in excellent yields by the reaction of bis(4‐fluorophenyl)phenylphosphine oxide, 1 , with one equivalent of potassium hydroxide in DMSO/water. The structure and purity of 2 were confirmed via ¹H, ¹³C, and ³¹P NMR spectroscopy along with elemental analysis. Polymerization reactions of 2 in NMP or DMSO at 180 °C provided the corresponding linear poly(arylene ether phosphine oxide)s, PAEPOs, with number average molecular weights, M_n, ranging from 11,700 to 36,500 Da. All of the polymer samples were completely soluble in chloroform, tetrahydrofuran, DMSO, NMP, and DMAc. The polymerization reactions were accompanied by a competing intramolecular process that resulted in the formation of cyclic oligomeric species that were removed via a final precipitation from methanol. Analysis using ³¹P NMR spectroscopy and size exclusion chromatography (SEC) confirmed that the majority of the lower molecular weight cyclic species were removed via this process. The polymer samples formed tough films when chloroform solutions were slowly evaporated on a glass slide. The PAEPO samples prepared in this study exhibited excellent thermal stability with T_d (5%) values between 503 and 542 in air while the glass transition temperatures ranged from 223 to 237 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2099–2106, 2006     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Chiral soluble polymers and microspheres for enantioselective crystallization

A series of chiral polymers based on poly(N‐acryl) amino acids was synthesized using a convergent synthetic approach. These chiral polymers have been used as chiral additives to induce enantioselective crystallization of racemic or conglomerate amino acids in solutions. These polymeric additives showed strong capabilities to enhance highly enantioselective resolution during the crystallization of amino acids. In addition, these polymers caused unusual modifications of amino acid crystal morphologies. Furthermore, spherical microparticles of those same chiral polymers were also shown active in similar chiral discriminations during amino acid crystallizations occurring on microparticle surfaces. Our study demonstrates the high potential of chiral polymers and microparticles to resolve amino acids throughout crystallization processes. High enantiomeric excesses in one targeted enantiomer of amino acids can also be maximized via time‐dependent kinetic control of crystallizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3009–3017, 2006     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006