Improved GC/ECNI-MS sensitivity of decabromodiphenyl ether determination on 30 m columns by increasing the carrier gas flow after a modified gel permeation chromatographic cleanup protocol employing cyclohexane/ethyl acetate as eluent

BDE-209 is the predominant constituent of the commercial mixture decabromodiphenyl ether which is used as brominated flame retardant (BFR). Owing to difficulties associated with the high mass (thermal instability and low vapour pressure), short GC columns (≤15?m) have been suggested for its analysis while longer columns (30–50?m) are suggested for other polybrominated diphenyl ether (PBDE) congeners. To overcome this considerable expenditure in the analysis of PBDEs, we aimed at increasing the sensitivity of BDE-209 analysis by gas chromatography coupled with electron-capture negative ion mass spectrometry (GC/ECNI-MS) on a 30?m column. The chromatographic performance of BDE-209 on the 30?m GC column was improved by increasing the carrier gas flow from initially 1.2?mL?min^?1 to 5 or 10?mL?min^?1 after the last octabromo diphenyl ether (Br₈DE) congener was eluted. With this high carrier gas flow, the column residence time of BDE-209 was shortened by ～25%, the peak height was increased and, consequently, the limit of detection by GC/ECNI-MS in selected ion monitoring (SIM) mode was improved. When this high-flow GC/ECNI-MS-SIM method was applied to a sediment sample, we realized that gel permeation chromatography (GPC) – used for the removal of lipids and/or sulphur – provided low recovery rates for BDE-209. The large molecule BDE-209 eluted late and only 50% was recovered by our previous standard protocol for polyhalogenated compounds. Application of a modified GPC procedure with a longer collection time increased the recovery of BDE-209 in the GPC step to ～90%.     

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9′-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.     

Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-β-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.     

Fabrication of Alginate-Based O/W Nanoemulsions for Transdermal Drug Delivery of Lidocaine: Influence of the Oil Phase and Surfactant

Transdermal drug delivery of lidocaine is a good choice for local anesthetic delivery. Microemulsions have shown great effectiveness for the transdermal transport of lidocaine. Oil-in-water nanoemulsions are particularly suitable for encapsulation of lipophilic molecules because of their ability to form stable and transparent delivery systems with good skin permeation. However, fabrication of nanoemulsions containing lidocaine to provide an extended local anesthetic effect is challenging. Hence, the aim of this study was to address this issue by employing alginate-based o/w nanocarriers using nanoemulsion template that is prepared by combined approaches of ultrasound and phase inversion temperature (PIT). In this study, the influence of system composition such as oil type, oil and surfactant concentration on the particle size, in vitro release and skin permeation of lidocaine nanoemulsions was investigated. Structural characterization of lidocaine nanoemulsions as a function of water dilution was done using DSC. Nanoemulsions with small droplet diameters (d < 150 nm) were obtained as demonstrated by dynamic light scattering (DLS) and cryo-TEM. These nanoemulsions were also able to release 90% of their content within 24-h through PDMS and pig skin and able to the drug release over a 48-h. This extended-release profile is highly favorable in transdermal drug delivery and shows the great potential of this nanoemulsion as delivery system.     

Oxygen permeation and phase structure properties of partially A-site substituted BaCo_(0.7)Fe_(0.225)Ta_(0.075)O_(3-δ) perovskites

Ba0.9R0.1Co0.7Fe0.225Ta0.075O3-δ(BRCFT, R = Ca, La or Sr) membranes were synthesized by a solid-state reaction. Metal cation Ca2+,La3+or Sr2+doping on A-site partially substituted Ba2+in BaCo0.7Fe0.225Ta0.075O3-δoxides, and its subsequent effects on phase structure stability, oxygen permeability and oxygen desorption were systematically investigated by XRD, TG-DSC, H2-TPR, O2-TPD techniques and oxygen permeation experiments. The partial substitution with Ca2+, La3+or Sr2+, whose ionic radii are smaller than that of Ba2+, succeeded in stabilizing the cubic perovskite structure without formation of impurity phases, as revealed by XRD analysis. Oxygen-involving experiments showed that BRCFT with A-site fully occupied by Ba2+exhibited good oxygen permeation flux under He flow, reaching about 2.3mL min-1 cm-2at 900 ℃ with 1 mm thickness. Of all the membranes, BLCFT membrane showed better chemical stability in CO2, owing to the reduction in alkalinity of the mixed conductor oxide by La doping. In addition, we also found the stability of the perovskite structure under reducing atmospheres was strengthened by increasing the size of A-site cation(Ba2+La3+Sr2+Ca2+).     

Superwetting Patterned Membranes with an Anisotropy/Isotropy Transition: Towards Signal Expression and Liquid Permeation

Superwetting membranes with responsive properties have attracted heightened attention because of their fine‐tunable surface wettability. However, their functional diversity is severely limited by the “black‐or‐white” wettability transition. Herein, we describe a coating strategy to fabricate multifunctional responsive superwetting membranes with SiO₂/octadecylamine patterns. The adjustable patterns in the responsive region are the key factor for functional diversity. Specifically, the coated part of the membrane displayed a superhydrophobicity/superhydrophilicity transition at different pH values, whereas the uncoated part exhibited invariant superhydrophilicity. On the basis of this anisotropy/isotropy transition, the membranes can serve as either responsive permeable membranes or signal‐expression membranes, thus enabling the responsive separation and permeation of liquids with satisfactory separation efficiency (>99.90 %) and flux (ca. 60 L m^?2 h), as well as real‐time liquid signal expression with alterable signals.     

Comparison of test methods for oxygen permeability: Optical method versus carrier gas method

The oxygen permeability of films is relevant for packaging related and technical applications. An increasingly used test method for the measurement of oxygen permeability is the optical test method, because it allows a simple and cost-efficient measurement setup. This method is based on optical chemical sensors. However, not much is known about its validity. Therefore, method validation is necessary which is subject of this study. The optical method is compared with the carrier gas method for a variety of film samples. In the tested permeability range of 0.5–2500 cm³ (STP)·(m² d bar)⁻¹ both methods deviated less than 20% for zero and 50% relative humidity.     

ATRP of styrene catalyzed by elemental Fe(0) and Br2: An easy and economical ATRP process

In this work, zero‐valent iron (Fe(0)) (powder or wire) and elemental bromine (Br₂) were used as the catalysts for atom transfer radical polymerization (ATRP) of styrene (St) without any additional initiator at 110 °C. The polymerizations happened with controlled evidence at appropriate molar ratio of Fe(0) to Br₂: a remarkable increase of molecular weights with St conversions, the narrow molecular weight distributions and living polymer chains end‐capped by Br. More Br₂ or less Fe(0) led to a slow polymerization rate but an improved control over molecular weights. After examining the polymer chain ends by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, it was concluded that the polymerization was initiated by thermal self‐initiation, and regulated by the in situ generated Fe^IIIBr₃. The results suggested that the Fe(0)/Br₂ catalyzing polymerization was a classical ATRP process with easier operation and more economical components. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermally stable polyimide isomers for membrane-based gas separations at elevated temperatures

The temperature dependence of gas sorption and transport properties is examined for two polyimide isomers. The permeabilities and solubilities of five gases in these materials are reported over an extensive temperature range from 35 to 325°C. Also, the activation energies for permeation, the heats of sorption, and the activation energies for diffusion obtained for both polyimides are compared and correlated with physical properties of the polymers and penetrants. The influence of temperature on the selective properties of these membrane materials is discussed for three gas separations; He/N₂, CO₂/CH_4, and O₂/N_2. Thorough analysis of these data provides insight into the influence of the subtle difference in chain structure of the two isomers. The performance of the 6FDA-6F_p DA as a separation membrane at high temperatures suggests that it is an outstanding candidate for use in novel elevated temperature applications. ©1995 John Wiley & Sons, Inc.     

In situ‐generated Ru(III)‐mediated ATRP from the polymeric Ru(III) complex in the absence of activator generation agents

Past research has examined the atom transfer radical polymerization (ATRP) with high oxidation state metal complexes and without the need for any additives such as reducing agent or free radical initiator. To extend this research, half‐metallocene ruthenium(III) (Ru(III)) catalysts were used for the polymerization of methyl methacrylate (MMA) for the first time. These catalysts were generated in situ simply by mixing phosphorus‐containing ligand and pentamethylcyclopentadienyl (Cp*) Ru(III) polymer ((Cp*RuCl₂)_n). The complexes in their higher oxidation state such as Cp*RuCl₂(PPh₃) were air‐stable, highly active, and removable catalysts for the ATRPs of MMA with both precision control of molecular weight and narrow polydispersity index. The addition of ppm amount of metal catalyst contributed to the formation of very well‐defined homopolymers and copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011