Separation of Dyes from Aqueous Solutions by Paper Adsorption

Separation of the dyes methyl violet, methylene blue, and congo red from aqueous solutions by paper capillary permeation adsorption method was studied using paper. Nearly 100% of the investigated dyes could be separated under the optimum conditions. The effect of pH on the separation efficiency was studied in particular. At pH 5–9, 1.3–11, and 7–11, the maximum separation was achieved for methyl violet, methylene blue and congo red, respectively. The effects of dye concentration and some foreign ions on the separatability were examined. Moreover, the selective separation of some dyes was attempted by elution with chemical reagents.     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

稀土钨青铜K0.71Nd0.028WO3的制备及其电性能

Tetragonal tungsten bronze K_0.71Nd_0.028WO₃ was synthesized by rare earth co-permeation method using Keggin type POMs of α-K₁₀[SiCu₃(OH₂)W₉O₃₇]·6H₂O (abbreviated as SiW₉Cu₃) as precursor. XRD, XPS, XRF, TG-DTA were used to characterize the resulting material. The XPS results indicate that Nd has permeated and diffused into the body of the sample and exists in tungsten bronze in the form of K_0.71Nd_0.028WO₃. The results of TG-DTA show that K_0.71Nd_0.028WO₃ begins to decompose at 320 ℃. The consequence of DC four-probe shows that the conductivity of the sample permeated by rare earth is 10³ times higher than that of the sample only permeated by methanol at room temperature. The conductivity of the sample only permeated by methanol is only 10^-3 S·cm^-1 but the conductivity of the sample permeated by rare earth is 1.65 S·cm^-1.     

Degradation-fragmentation of marine plastic waste and their environmental implications: A critical review

This review critically evaluates the plastic accumulation challenges and their environmental (primarily) and human (secondarily) impacts. It also emphasizes on their degradation and fragmentation phenomena under marine conditions. In addition, it takes into account the leachability of the various chemical substances (additives) embedded in plastic products to improve their polymeric properties and extend their life. Regardless of their effectiveness in enhancing the polymeric function of plastic products, these additives can potentially contaminate air, soil, food, and water. Several findings have shown that, regardless of their types and sizes, plastics can be degraded and/or fragmented under marine conditions. Therefore, the estimation of fragmentation and degradation rates via a reliable developed model is required to better understand the marine environmental status. The main parameter, which is responsible for initiating the fragmentation of plastics, is sunlight/UV radiation. Yet, UV- radiation alone is not enough to fragment some plastic polymer types under marine conditions, additional factors are needed such as mechanical abrasion. It should be also mentioned that most current studies on plastic degradation and fragmentation centered on the primary stages of degradation. Thus, further studies are needed to better understand these phenomena and to identify their fate and environmental effects.     

聚酰亚胺中空纤维膜用于甲醇/甲基叔丁基醚的分离

甲醇／甲基叔丁基醚混合物的膜法分离，大多采用渗透汽化方法，少有采用蒸汽渗透法。用聚酰亚胺中空纤维膜，对以蒸汽渗透和渗透汽化两种方式分离甲醇／甲基叔丁基醚混合物（甲醇质量分数为0．01－0．30）的效果进行了对比。结果显示，在甲醇质量分数低于0．05时，蒸汽渗透较渗透汽化法的分离性能优越。     

透氢钯复合膜的原理、制备及表征

钯及其合金膜由于具有透氢性好和耐高温的特点,除了用作氢气分离和纯化器外,还可以用作脱氢、制氢等反应的反应器,以实现反应和分离的一体化,并提高转化率和选择性。本文综述了钯基复合膜的原理、制备及表征,并重点介绍了本研究组的光催化镀膜工艺。     

凝胶渗透色谱法测定聚丙烯腈共聚物分子量中宽分布校正法的应用

应用宽分布校正法对凝胶渗透色谱(GPC)进行了校正，将校正曲线用于聚丙烯腈(PAN)共聚物分子量的计算。对扣除色谱峰扩展效应前后的测试结果与乌氏粘度法测得的数据进行比较。结果表明，应用宽分布校正法时，必须扣除色谱峰扩展效应，才能得到较为准确的测试结果。     

Thermogravimetric study on perovskite-like oxygen permeation ceramic membranes

The oxygen permeation properties of mixed-conducting ceramics SrFeCo_0.5O_3−δ (SFCO), Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCFO), La_0.2Sr_0.8Co_0.8Fe_0.2O_3−δ (LSCFO) and Ba_0.95Ca_0.05Co_0.8Fe_0.2O_3−δ (BCCFO) were studied by thermogravimetric method in the temperature range 600–900 °C. The results show that the oxygen adsorption rate constants k_a of all material are larger than oxygen desorption rate constants k_d and both k_a and k_d are not strongly dependent on temperature in the studied temperature range. The oxygen vacancy contents δ(N₂) and δ(O₂) in nitrogen and oxygen and their difference Δδ = δ(N₂) − δ(O₂) play an important role in determining the temperature behavior of oxygen permeation flux J_O2.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Elaboration and characterisation of PDMS-HTiNbO5 nanocomposite membranes

Poly(dimethylsiloxane) (PDMS)-HTiNbO₅ nanocomposite membranes with various HTiNbO₅ nanofiller content were prepared by melt intercalation. WAXS diffraction measurements and TEM observations have suggested that the HTiNbO₅ mineral was exfoliated in the PDMS matrix. The influence of the filler in the membrane was evaluated by water diffusion, gas permeation (CO₂, N₂, O₂, ethane and ethylene), toluene pervaporation and by CO₂ sorption measurements.A filler content of only 2 wt.% in PDMS-HTiNbO₅ nanocomposite membranes slows down the water diffusion significantly, and a filler content of 5 wt.% reduces also the permeability of the films for toluene. The addition of a filler content up to 10 wt.% do not significantly influences the gas permeability (P) except for CO₂. The PDMS matrix appears to be highly permeable and, therefore, a decreasing effect on P is only marked for a very high HTiNbO₅ content. This effect is more pronounced for CO₂, the P value of which decreases by 80% when the amount of nanofiller is 40 wt.%. The sorption measurements show that the interaction between CO₂ and PDMS is weak (isotherms agree with Henry’s law). The filler decreases the solubility of CO₂ in the films (S = 7.94 × 10⁻³ and S = 5.44 × 10⁻³ cm³ STPcm⁻³ film cmHg⁻¹ for PDMS and PDMS-HTiNbO₅ 40 wt.%, respectively).