Selective preconcentration of trace thorium from aqueous solutions with Th(IV)-imprinted polymers prepared by a surface-grafted technique

A novel ion-imprinted adsorbent for selective solid phase extraction of thorium(IV) based on the surface of silica gel was prepared by a surface-grafted technique with methacrylic acid (MAA) as a functional monomer. After removal of Th(IV) ions with 3?mol?L^?1 HCl solution, the obtained imprinted particles for Th(IV) exhibited specific recognition and relatively rapid kinetic process. The maximum static and total dynamic adsorption capacity of the ion-imprinted polymers (IIPs) for Th(IV) was 33.2 and 17.3?mg?g^?1, respectively. A comparison of the selectivity coefficient of the imprinted polymers with that of non-imprinted polymers showed that the imprinted matrix for Th(IV)/U(VI), Th(IV)/Ce(III), Th(IV)/La(III) and Th(IV)/Zr(IV) was 58.8, 107, 106.4 and 151.7 times greater than non-imprinted matrix, respectively. With a series of samples loading flow rate of 3?mL?min^?1 for preconcentration, an enrichment factor of 14.6 and the detection limit of 0.59?µg?L^?1 were obtained. The relative standard deviation of the method under optimum conditions was 2.1% (n?=?7). The developed method was successfully applied to the determination of trace Th(IV) in real water samples with satisfactory results.     

“Grafting through” polymerization involving surface-bound monomers

“Grafting through” polymerization represents copolymerization of free monomers in solution and polymerizable units bound to a substrate. Free polymer chains are formed initially in solution and can incorporate the surface-bound monomers, and thereby, get covalently bonded to the surface during the polymerization process. As more growing chains attach to the surface-bound monomers, an immobilized polymer layer is formed on the surface. We use a combination of computer simulation and experiments to comprehend this process for monomers bound to a flat impenetrable substrate. We concentrate specifically on addressing the effect of spatial density of the surface-bound monomers on the formation of the surface-attached polymers. We employ a lattice-based Monte Carlo model utilizing the bond fluctuation model scheme to provide molecular-level insight into the grafting process. For experimental validation, we create gradients of density of bound methacrylate units on flat silicon wafers using organosilane chemistry and carry out “grafting through” free radical polymerization initiated in bulk. We report that the proximity of the surface-bound polymerizable units promotes the “grafting through” process but prevents more free growing chains to “graft through'' the polymerizable units. The “grafting through” process is self-limiting in nature and does not affect the overall density of the surface-bound polymer layer, except in case of the highest theoretical packing density of surface-bound monomers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 263–274     

Preparation of hydrophilic poly(vinylidene fluoride) membrane by in-situ grafting of N-vinyl pyrrolidone via a reactive vapor induced phase separation procedure

Increasing hydrophilicity of hydrophobic membrane is one of the strategies to improve its antifouling performance. Herein we report a procedure of reactive-vapor induced phase separation to prepare an N-vinyl pyrrolidone (NVP) modified poly(vinylidene fluoride) (PVDF) membrane to improve its hydrophilicity. PVDF solution containing NVP monomer was cast in ammonia water vapor atmosphere to prepare the modified membrane. During the process, PVDF was dehydrofluorinated by the reactive vapor of ammonia water to generate double bond of FC═CH, and then NVP was grafted. The degree of grafting modification and the microstructure evolution of the membrane were studied by adjusting the amount of NVP addition. A possible mechanism of membrane formation from crystallization gelling to non-crystallization gelling has been proposed to understand the morphology change from nodular sphere to bi-continuous microstructure with fibril matrix. It has been found that rising the degree of modification has changed the polymorph of PVDF from β to α crystalline phase, as well as turned the hydrophobic PVDF membrane into hydrophilic. Moreover, the modified membrane displayed obvious reduction in bovine serum albumin adsorption, suggesting improvement in anti-fouling performance. Therefore, our work provides an easy strategy to prepare hydrophilic PVDF membrane, which may have promising potential applications.     

Maltodextrin as stabilizer for emulsion polymerization: Adsorption and grafting behavior

Emulsion polymerization of the three-monomer system butyl acrylate–styrene–methacrylic acid was performed in batch using a commercial maltodextrin derived from starch degradation as stabilizer. Stable latexes with narrow particle size distributions were obtained in all examined cases. A method was developed to analyze and quantify the partitioning of the maltodextrin between the continuous phase (supernatant) and the particle phase. Significant differences between the polysaccharides adsorbed onto particles with or without emulsion polymerization reaction were observed. The possible reactions of maltodextrin in presence of a radical initiator were studied in aqueous phase, thus confirming maltodextrin degradation. The formation of copolymers involving the original monomers and the stabilizer according to two different reactive pathways was also confirmed. In terms of adsorbed maltodextrin, two different contributions were observed: maltodextrin physically adsorbed and maltodextrin chemically grafted and/or physically incorporated into the polymer.     

Versatile functional poly(3‐hexylthiophene) for hybrid particles synthesis by the grafting onto technique: Core@shell ZnO nanorods

We demonstrate an efficient strategy to anchor poly(3‐hexylthiophene) (P3HT) onto zinc oxide (ZnO) surfaces. Synthesis of a novel triethoxysilane‐terminated regioregular P3HT is herein reported and supported by thorough characterization. Three triethoxysilane‐terminated P3HTs of different molar masses were prepared via a hydrosilylation reaction from allyl‐terminated P3HT. MALDI‐TOF and ¹H NMR were performed to characterize the polymer and show that around 80% of the chains are end‐functionalized. These polymers were then grafted onto the ZnO nanorods to create a macromolecular self‐assembled monolayer. This versatile technique could be subsequently applied to different metal oxide surfaces, such as silicon, titanium, or indium‐tin oxide, and represents a new one‐pot strategy based on triethoxysilane coupling reaction. Importantly, the influence of the molar mass on the grafting density and the polymer shell thickness was studied via thermo gravimetric analysis and transmission electron microscopy. The optical properties of the hybrid materials were determined by UV–visible absorption and photoluminescence to show a quenching effect of P3HT fluorescence by ZnO when grafted. This electronic transfer associated with an improved miscibility of the ZnO@P3HT, makes these hybrid materials suitable candidates for photovoltaic applications. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 30–38     

Biomimetic design of amphiphilic polycations and surface grafting onto polycarbonate urethane film as effective antibacterial agents with controlled hemocompatibility

The synthetic polycations are ideal candidates as antimicrobial agents, because they resemble natural antimicrobial peptides, but to render hemocompatibility to these materials is a great challenge. Herein, we used 2‐(tert‐butyl‐aminoethyl) methacrylate (TBAEMA), to synthesize its homopolymer and pegylated random and diblock copolymers with polyethyleneglycol methacrylate (PEGMA, M_n = 360 Da) by single‐electron transfer–living radical polymerization (SET‐LRP). In the second step, the secondary amino groups in the precursor polymers were quaternized with iodomethane and bromohexane, to obtain three series of quaternized polymers. The antimicrobial properties of these quaternized polymers were evaluated against Escherichia coli (E. coli), by studying the minimum inhibitory concentrations (MICs) which ranged between 32 and 200 mg L^?1 and showed higher values for the quaternized random than the diblock copolymers. In addition to, we have also demonstrated the grafting of these polycations onto polycarbonate urethane film surfaces, which showed good killing efficacy against E. coli. Furthermore, the hemolysis of these materials was investigated against human red blood cells, which indicated that except the quaternized homopolymers that showed highest hemolysis, all other amphiphilic polycations exhibited very low hemolytic activity. Therefore, our designed materials with controlled structures and functionality, synthesized from cheaply available resources could serve as useful agents in the field of biomedicines and implantable materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3166–3176     

Interfacial mechano-chemical grafting in styrene-butadiene rubber/halloysite nanotubes composites

SBR/unmodified HNT composites were prepared by open-mill mixing and vulcanization. The results showed that HNT could decrease the scorch and optimum cure time, and play a significant role in reinforcing SBR vulcanizates. Mechano-chemical grafting at the interface between HNT and SBR was investigated by using infrared spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), solid-state ¹³C NMR spectra and bonded rubber content, etc. The results showed the shearing force during the mixing process can impel the grafting reaction of SBR onto the surfaces of HNT, which leads to interfacial chemical bonding between phenyl’s α-H of SBR and the surface groups of HNT with Si-OH or Al-OH. Thus, the mechanical properties of the composites were significantly enhanced.     

Synthesis and investigation of dual pH‐ and temperature‐responsive behaviour of poly[2‐(dimethylamino)ethyl methacrylate]‐grafted gold nanoparticles

Gold nanoparticles (AuNPs) were synthesized by reduction of chloroauric acid (HAuCl₄) aqueous solution with hydrazine monohydrate. The AuNPs were immediately treated with cysteamine to obtain amine‐functionalized nanoparticles (Au‐NH₂). The reaction of Au‐NH₂ with epichlorohydrin and subsequent treatment with sodium hydroxide gave epoxidized AuNPs (Au‐EP). Then, thiol‐capped AuNPs (Au‐SH) were synthesized by reaction of Au‐EP with cysteamine. A ‘grafting to’ approach was utilized to graft bromine‐terminated poly(N ,N ′‐dimethylaminoethyl methacrylate), synthesized via aqueous atom transfer radical polymerization, with various molecular weights (6280, 25 800, 64 200 and 87 600 g mol⁻¹) onto Au‐SH to obtain Au‐P1, Au‐P2, Au‐P3 and Au‐P4 samples, respectively. All samples were exposed to temperature and pH variations, and Z‐average diameter was monitored using dynamic light scattering. According to the results, polymer‐grafted nanoparticles collapsed at lower temperatures with increasing solution pH for all molecular weight ranges due to deprotonation of tertiary amine groups. However, higher molecular weight polymers were more sensitive to pH variation especially in alkaline media. Also, a high degree of agglomeration was observed for Au‐P4 nanoparticles in alkaline media on increasing the temperature to 55 and 65 °C.     

Thermal Behavior of Polypropylene-g-glycidyl Methacrylate Prepared by Melt Grafting

The thermal behaviors of glycidyl methacrylate (GMA)-grafted polypropylene (PP) (PP-g-GMA) with two different grafting degrees, namely, GPP1 and GPP2, were investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), wide-angle X-ray diffraction (WAXD), dynamic mechanical analysis (DMA), and thermogravimetrical analysis (TGA). DSC results suggested that the GMA grafted PP exhibited higher crystallization temperature T_c, higher melting temperature T_m, and higher crystallinity compared with the neat PP. The isothermal crystallization kinetics was analyzed with the Avrami equation and the total crystallization activation energy was calculated. It was concluded that the crystallization processes of PP and the grafted PP were controlled by nucleation and the values of the crystallization activation energy of PP and the grafted PP were almost identical. POM results suggested that the GMA grafted PP exhibited smaller spherulites size compared with the neat PP. WAXD patterns indicated that the neat PP encouraged the formation of γ phase, compared with the grafted PP, during the crystallization process. DMA results showed that melt grafting did not induce a clear effect on the γ-transition and β-transition of the amorphous phase but resulted in a decrease in mobility of the PP chains in the crystals. TGA curves suggested that the melt grafting slightly improved the thermal stability of PP.