Post-polymerization modification of aromatic polyimides via Diels-Alder cycloaddition

We report a facile post-polymerization modification route to functionalized aromatic polyimides via Diels-Alder cycloaddition. Aromatic polyimides are important, versatile high-performance polymers; however, their structural diversity is restricted by the requirements of the step-growth polymerization. We prepared polyimides with alkynes in their main-chain as macromolecular dienophiles and quantitatively grafted tetraphenylcyclopentadienone based dienes. The resulting solution-processable, wholly aromatic polyimides show a considerable increase in surface area due to the induced conformational changes and bulky, rigid, and contorted molecular structures. The orthogonality of the reaction is exploited to insert functional groups, namely bromine and sulfonates, along the polymer backbone. In a further extension, the phenylene segments undergo cyclodehydrogenation to form nanographene segments within the polymer chains. The Diels-Alder cycloaddition onto polyimides is therefore demonstrated to be an effective, widely applicable route to tunable high-performance polymers with value-added functionality and thus considerable potential in a wide range of advanced materials.     

Stable and Storable N(CF3)2 Transfer Reagents

Fluorinated groups are essential for drug design, agrochemicals, and materials science. The bis(trifluoromethyl)amino group is an example of a stable group that has a high potential. While the number of molecules containing perfluoroalkyl, perfluoroalkoxy, and other fluorinated groups is steadily increasing, examples with the N(CF₃)₂ group are rare. One reason is that transfer reagents are scarce and metal-based storable reagents are unknown. Herein, a set of Cu^I and Ag^I bis(trifluoromethyl)amido complexes stabilized by N- and P-donor ligands with unprecedented stability are presented. The complexes are stable solids that can even be manipulated in air for a short time. They are bis(trifluoromethyl)amination reagents as shown by nucleophilic substitution and Sandmeyer reactions. In addition to a series of benzylbis(trifluoromethyl)amines, 2-bis(trifluoromethyl)amino acetate was obtained, which, upon hydrolysis, gives the fluorinated amino acid N,N-bis(trifluoromethyl)glycine.     

氟化共价有机聚合物固相微萃取-高效液相色谱测定水产品中丁香酚类麻醉剂

氟化共价有机聚合物(F-COP)具有较大的比表面积和吸附容量,对丁香酚类化合物具有特异性吸附。该文以2,3,5,6-四氟对二苯甲醛(TFA)和1,3,5-三(4-氨苯基)苯(TAPB)为单体,三氟甲磺酸钪(Sc(OTf)₃)为催化剂在室温下快速合成F-COP,并将其作为固相微萃取(SPME)吸附剂,结合高效液相色谱-紫外检测法(HPLC-UV),建立了测定水产品中丁香酚、乙酸丁香酚酯和甲基丁香酚麻醉剂的分析方法。通过傅里叶红外光谱、X射线衍射、N₂吸附-解吸等温线和扫描电子显微镜等手段对F-COP材料进行表征。考察了萃取时间、搅拌速度、解吸溶剂及解吸时间对丁香酚类麻醉剂萃取量的影响,在萃取时间为30 min、搅拌速度为700 r/min、解吸溶剂为乙腈、解吸时间为10 min时,丁香酚类麻醉剂获得了最佳的萃取效果。在Diamonsil Plus C₁₈-B色谱柱(250 mm×4.6 mm, 5 μm)上,以甲醇-水(60∶40, v/v)为流动相,流速0.800 mL/min,进样量20.0 μL,紫外检测波长280 nm,柱温30 ℃条件下,丁香酚和乙酸丁香酚酯在10~1000 μg/L,甲基丁香酚在10~1500 μg/L范围内呈现出良好的线性关系,相关系数(r²)大于0.9961,方法检出限为2.9~4.5 μg/kg(S/N=3),精密度小于8.7%(n=5)。最后,将该分析方法用于罗非鱼和基围虾样品的3种麻醉剂残留分析中,得到了满意的回收率(76.7%~104%)。结果表明,F-COP-SPME-HPLC-UV可满足水产品中丁香酚类麻醉剂的分析检测。     

An Endo-Selective Epoxide-Opening Cascade for the Fast Assembly of the Polycyclic Core Structure of Marine Ladder Polyethers

The rapid synthesis of marine ladder polyethers from polyepoxide precursors (in analogy with the biosynthetic pathway hypothesized by Nakanishi) is hampered by the fact that the exo-selective epoxide-opening cyclization cascade that gives THF-type polyethers is preferred over the endo-selective cascade that gives the desired products. We found that perfluoro-tert-butanol (PFTB) cooperating with 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM]BF₄) can promote endo-selective epoxide-opening cyclization reactions of trisubstituted epoxy alcohols. Starting from readily accessible homochiral polyepoxy alcohols with a methyl group at all the endo-cyclization sites, we were able to construct polyethers up to five consecutive fused 6-, 7-, and/or 8-membered rings in one step. Notably, molecules with the 7/7/6/6 and 7/7/6/7/6 polyether frameworks of hemibrevetoxin B and brevenal, respectively, could be synthesized in 40 % and 17 % chemical yields.     

基于竞争配位的Ca2+特异性响应1H/19F磁共振成像分子探针

合成了一种含~(19)F的Mn~(2+)配合物3,12-二(2-氧代-2-((2,2,2-三氟乙基)氨基)乙基)-6,9-二氧杂-3,12-二氮杂十四烷酸锰(Ⅱ)(Mn(Ⅱ)-L,1),可实现对Ca~(2+)特异响应的~1H/~(19)F磁共振成像分析。~(19)F核在近距离的顺磁性Mn~(2+)影响下产生了顺磁弛豫增强作用,使~(19)F的横向弛豫时间T_2急剧缩短而磁共振信号锐减。当有Ca~(2+)存在时,与配体L的竞争配位使得~(19)F远离Mn~(2+)离子,从而~(19)F磁共振信号得到恢复。同时,由于Mn~(2+)离子从配合态变为游离态,水配位数增加使得其对~1H的纵向弛豫时间T_1弛豫性能增加,从而~1H磁共振成像信号也增强。相关实验的结果证实了该配合物是一种能对Ca~(2+)特异性响应的~1H/~(19)F磁共振成像探针。     

Synthesis and surface properties of novel fluorinated polyurethane base on F‐containing chain extender

A novel fluorinated chain extender, (1‐(ethyl(2‐hydroxyethyl)amino)‐3‐ ((3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl)oxy)propan‐2‐ol) (FPO), was synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. Poly (ether urethane)s containing various amounts of the chain extender with fluorinated side chains (FPUs) were prepared by isophorone diisocyanate (IPDI), polytetra‐methylene‐ether‐glycol (PTMG), 3‐aminopropyltriethoxysilane (KH‐550), and 1,4‐butandiol (BDO). Films of FPUs were investigated by water absorption, contact angle, pencil hardness, adhesive force, and thermal analysis. Coating FPUs on micro‐nano concave‐convex structure plate realizes superhydrophobic performance. Scanning electron microscope (SEM) and atomic force microscopy (AFM) demonstrated that there is a lot of irregular concave‐convex structure, which forms a typical air cushion model. X‐ray photoelectron spectroscopy (XPS) analysis showed that surface fluorine content is 165% more than that of film average fluorine content. The superhydrophobic plate with 10% or higher F‐containing FPUs coating is of outstanding chemical corrosion resistance, excellent solvent resistance, and wear resistance.     

Building an Air Stable and Lithium Deposition Regulable Garnet Interface from Moderate‐Temperature Conversion Chemistry

Garnet‐type electrolytes suffer from unstable chemistry against air exposure, which generates contaminants on electrolyte surface and accounts for poor interfacial contact with the Li metal. Thermal treatment of the garnet at >700 °C could remove the surface contaminants, yet it regenerates the contaminants in the air, and aggravates the Li dendrite issue as more electron‐conducting defective sites are exposed. In a departure from the removal approach, here we report a new surface chemistry that converts the contaminants into a fluorinated interface at moderate temperature <180 °C. The modified interface shows a high electron tunneling barrier and a low energy barrier for Li⁺ surface diffusion, so that it enables dendrite‐proof Li plating/stripping at a high critical current density of 1.4 mA cm^?2. Moreover, the modified interface exhibits high chemical and electrochemical stability against air exposure, which prevents regeneration of contaminants and keeps high critical current density of 1.1 mA cm^?2. The new chemistry presents a practical solution for realization of high‐energy solid‐state Li metal batteries.     

Ionothermal Synthesis of Imide‐Linked Covalent Organic Frameworks

Covalent organic frameworks (COFs) are an extensively studied class of porous materials, which distinguish themselves from other porous polymers in their crystallinity and high degree of modularity, enabling a wide range of applications. COFs are most commonly synthesized solvothermally, which is often a time‐consuming process and restricted to well‐soluble precursor molecules. Synthesis of polyimide‐linked COFs (PI‐COFs) is further complicated by the poor reversibility of the ring‐closing reaction under solvothermal conditions. Herein, we report the ionothermal synthesis of crystalline and porous PI‐COFs in zinc chloride and eutectic salt mixtures. This synthesis does not require soluble precursors and the reaction time is significantly reduced as compared to standard solvothermal synthesis methods. In addition to applying the synthesis to previously reported imide COFs, a new perylene‐based COF was also synthesized, which could not be obtained by the classical solvothermal route. In situ high‐temperature XRPD analysis hints to the formation of precursor–salt adducts as crystalline intermediates, which then react with each other to form the COF.     

Fluorinated Alcohols: Magic Reaction Medium and Promoters for Organic Synthesis

Fluorinated alcohols have been widely used in the synthetic organic chemistry over the past decades. The unique properties such as the strong hydrogen‐bonding donor ability and low nucleophilicity allow them to promote organic reactions in the absence of any catalyst. These approaches have distinct advantages in terms of operational simplicity, practicability and environmental friendliness. Reactions promoted by fluorinated alcohols, including nucleophilic substitution reactions, annulation reactions, electrophilic reactions, dearomatization reactions, functionalization of multiple bond, epoxidation reactions and miscellaneous reactions have been summarized in this account.     

Synthesis of copolyimides based on room temperature ionic liquid diamines

Block copolyimides based on aromatic dianhydrides and diamines copolymerized with diamino room temperature ionic liquid (RTIL) monomers were synthesized over a range of compositions. Specifically, two diamino RTILs, 1,3‐di(3‐aminopropyl) imidazolium bis[(trifluoromethyl)sulfonyl] imide ([DAPIM] [NTf₂]) and 1,12‐di[3‐(3‐aminopropyl) imidazolium] dodecane bis[(trifluoromethyl) sulfonyl] imide ([C₁₂ (DAPIM)₂] [NTf₂]₂) were synthesized using a Boc protection method. The two RTILs were reacted with 2,2‐bis(3,4‐carboxylphenyl) hexafluoropropane dianhydride (6FDA) to produce 6FDA‐RTILs oligomers that formed the RTIL component for the block copolyimides. The oligomers were reacted with 6FDA and m‐phenylenediamine (MDA) at oligomer concentration from 6.5 to 25.8 mol % to form block copolyimides. Increasing the concentration of the 6FDA‐RTIL oligomer in the block copolyimides resulted in a decrease in the thermal degradation temperature, glass transition temperature and an increase in the density. The gas permeability of the RTIL based block copolyimide decreased but the ideal permeability selectivity for CO₂/CH₄ gas pair increased relative to the pure 6FDA‐MDA. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4036–4046, 2010