Fused silica capillaries with two segments of different internal diameters and inner surface roughnesses prepared by etching with supercritical water and used for volume coupling electrophoresis

In this work, single‐piece fused silica capillaries with two different internal diameter segments featuring different inner surface roughness were prepared by new etching technology with supercritical water and used for volume coupling electrophoresis. The concept of separation and online pre‐concentration of analytes in high conductivity matrix is based on the online large‐volume sample pre‐concentration by the combination of transient isotachophoretic stacking and sweeping of charged proteins in micellar electrokinetic chromatography using non‐ionogenic surfactant. The modified surface roughness step helped to the significant narrowing of the zones of examined analytes. The sweeping and separating steps were accomplished simultaneously by the use of phosphate buffer (pH 7) containing ethanol, non‐ionogenic surfactant Brij 35, and polyethylene glycol (PEG 10000) after sample injection. Sample solution of a large volume (maximum 3.7 μL) dissolved in physiological saline solution was injected into the wider end of capillary with inlet inner diameter from 150, 185 or 218 μm. The calibration plots were linear (R ² ∼ 0.9993) over a 0.060–1 μg/mL range for the proteins used, albumin and cytochrome c. The peak area RSDs from at least 20 independent measuremens were below 3.2%. This online pre‐concentration technique produced a more than 196‐fold increase in sensitivity, and it can be applied for detection of, e.g . the presence of albumin in urine (0.060 μg/mL).     

Effect of Polyvinylpyrrolidone on the States of Water in Water-in-Oil Microemulsions with Betaine Surfactant

A water-in-oil (w/o) microemulsion was prepared with the zwitterionic surfactant dodecyl betaine (C₁₂BE), n-pentanol (C₅OH), n-heptane (C₇H₁₆) and water. Effects of polyvinylpyrrolidone (PVP) with different molecular weight on the state of water in w/o microemulsions at a given water/C₁₂BE molar ratio were investigated by FT-IR and differential scanning calorimetry (DSC). The experimental results showed that addition of PVP resulted in an increase of the content of the bound water in water pool of a w/o microemulsion, but a decrease of the amount of the bulky water. The higher the molecular weight of PVP, the more bound water; and the less bulk water. The change of the trapped water was not obvious due to the interference of C₅OH.     

Solid Introduction to an ICP-Atomic Emission Spectrometer for the Analyses of Metals Contents of Air Filters

The direct introduction of solid samples (air filters) to the inductively coupled plasma source of an atomic emission spectrometer using a furnace atomizer has been studied. Conditions have been found for the analysis of elements which volatilize with varyling degrees of difficulty. Lead, copper and vandaium compounds retained on glass fibre filters from air pollution studies have been determined. The results are in good agreement with those obtained by means of established sample dissolution/atomic emision methods.     

A new procedure for determination of nickel in some fake jewelry and cosmetics samples after dispersive liquid–liquid microextraction by FAAS

A new, simple and cheap dispersive liquid–liquid microextraction (DLLME) procedure was optimized for the preconcentration of trace amounts of Ni(II) as a prior step to its determination by flame atomic absorption spectrometry (FAAS). It is based on the microextraction of nickel, where appropriate amounts of the extraction solvent (CHCl₃), disperser solvent (ethanol) and chelating agent, name 5‐[(Z)‐isoxazol‐3‐yl‐diazenyl]‐2‐methyl‐quinolin‐8‐ol (MMD), were firstly synthesized/characterized and used. Various parameters that affect the extraction procedure such as pH, centrifugation rate and time, the chelating agent (MMD) concentration and sampling volume on the recovery of Ni(II) were investigated. The preconcentration of a 20 ml sample solution was thus enhanced by a factor of 80. The resulting calibration graph was linear in the range of 0.24–10 mg L⁻¹ with a correlation coefficient of 0.9998. The limit of detection (3 s/b) obtained under optimal conditions was 1.00 μg L⁻¹. The relative standard deviation for certified reference material determinations was 1.2%. The accuracy of the method was verified by the determination of Ni(II) in the certified reference material of wastewater (Waste water CWW TMD). The proposed procedure was successfully applied to the determination of Ni(II) in some fake jewelry and cosmetics samples.     

高炉冲渣水余热回收的可行性研究

根据高炉冲渣水的余热特点,提出了一个采用分离式热管换热器的余热回收的方案。文中对余热回收方案中换热设备的结构特点进行了描述。