Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

环境水体中酚类EDCs前处理技术及分析方法研究进展

环境内分泌干扰物(EDCs)是指干扰生物体内保持自身平衡和调节发育过程中天然激素的合成、分泌、运输、代谢、结合、反应、消除等生物过程的外源性化学物质,这类物质的存在会干扰人类和野生动物的内分泌系统,带来生殖障碍、发育异常、免疫功能减弱等问题。EDCs,尤其是使用最为广泛的酚类EDCs,在水环境中的污染特征研究已是当前科学界和公众共同关注的热点问题之一。环境样品基质非常复杂,使得痕量酚类EDCs的分析检测难度较大。该文对近年来环境水体中酚类EDCs的分析方法进行了综述,分别对样品前处理与检测分析技术进行了介绍,其中前处理技术包括样品萃取、样品净化和样品衍生化,检测分析技术包括化学分析和仪器分析。最后对酚类分析方法进行了展望。     

微流控芯片电泳在食品安全与环境污染检测中的应用

微流控芯片电泳具有样品和试剂消耗量小、分析速度快、分离效率高以及便于微型化等特点,特别适合于食品安全和环境污染相关的现场快速检测。该文综述了微流控芯片电泳技术在食品安全与环境污染检测方面的研究进展,着重介绍了该技术在食品中有害物质残留、非法食品添加剂以及环境样品中有害无机离子、有机污染物等目标物检测方面的典型应用实例,在此基础上初步讨论了微流控芯片电泳走向实际应用面临的问题和可能的解决办法。     

我国环境污染与居民恶性肿瘤发病及死亡的灰色关联度分析

收集2003-2012年三个区域:全国区域、城市区域、农村区域的恶性肿瘤发病及死亡率和污染物数据,采用灰色关联分析方法计算了不同区域与不同污染物的综合关联度,并对污染物致恶性肿瘤死亡的潜伏期作了定量分析.研究结果表明:1)氨氮排放量和二氧化硫对我国三个不同区域居民恶性肿瘤发病和死亡率的影响最大;2)污染物与恶性肿瘤发病率的关联度跟区域无关,但是污染物与恶性肿瘤死亡率的关联度城市明显大于农村,污染物与恶性肿瘤死亡率的关联度男性明显大于女性;3)氨氮和二氧化硫导致居民恶性肿瘤死亡的潜伏期分别为:2和1年.     

Experimental Studies of the Flow of Ferrofluid in Porous Media

This paper presents laboratory-scale experimental results of the behavior of ferrofluids in porous media consisting of sands and sediments. Ferrofluids are colloidal suspensions of magnetic particles stabilized in various carrier liquids. In the presence of an external magnetic field, a ferrofluid becomes magnetized as the particles align with the magnetic field. We investigate the potential for controlling fluid emplacement in porous media using magnetic fields. These experiments show that in laboratory-scale porous media experiments (up to 0.25m), with both vertical gravitational forces and lateral magnetic forces acting simultaneously, the magnetic field produces strong attractive forces on the ferrofluid, particularly in the vicinity of the magnet. These holding forces result in a predictable configuration of the fluid in the porous medium which is dependent on the magnetic field and independent of flow pathway or heterogeneity of the porous medium. No significant retention effects due to flow through variably saturated sands are observed. While the proposed field engineering applications of ferrofluids are promising, the observations to date are particularly relevant at the laboratory scale where the decrease in magnetic field strength with distance from a magnet is less of a limitation than in larger scale applications. Ferrofluids may find immediate application in any situation where it is desirable to control the motion or final configuration of fluid in an experimental flow apparatus without direct physical contact.     

Mathematical Models for Studying Environment Pollution Risks

The problem of longterm ecological prediction by means of mathematical modeling with available factual data on climate dynamics is discussed. The technique of quantitative estimates of risk/vulnerability on the basis of forward and inverse modeling and methods of the sensitivity theory is described. Examples of the calculated risk domains for Lake Baikal are given.     

山区公路滑坡灾害问题及对策分析——以云南元(江)磨(黑)高速公路为例

随着西部公路建设的蓬勃发展,越来越多的高等级公路必须穿越山区丘陵地带,这样必然导致大量的公路滑坡的出现,危及公路的正常运行及安全。本文以云南元(江)磨(黑)高速公路为例,在分析公路沿线自然环境条件及地质构造条件等的基础上,研究公路沿线的地质灾害的特点及危害,重点研究公路沿线所发育的滑坡的分布特征、危害、形成机制及整治对策和措施。研究表明,山区公路滑坡不仅与滑坡发育的工程地质条件有关,而且与工程设计方案及公路建设过程施工方案等人为因素有关。     

城市环境与地质问题研究现状与发展

本文对本次会议的专题城市环境地质问题进行了综述,对城市地质环境研究进行了展望。     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Liquid extraction surface analysis in-line coupled with capillary electrophoresis for direct analysis of a solid surface sample

A surface-sampling technique of liquid extraction surface analysis (LESA) was in-line coupled with capillary electrophoresis (CE) to expand the specimen types for CE to solid surfaces. The new direct surface analysis method of LESA–CE was applied to the determination of organophosphorus pesticides, including glufosinate-ammonium, aminomethylphosphonic acid, and glyphosate on the external surface of a fruit such as apple. Without any sample pretreatment, the analytes sprayed on the surface of a half apple were directly extracted into a liquid microjunction formed by dispensing the extractant from the inlet tip of a separation capillary. After extraction, the analytes were derivatized in-capillary with a fluorophore 4-fluoro-7-nitro-2,1,3-benzoxadiazole and analyzed with CE-laser induced fluorescence (LIF). The limits of detection for glufosinate-ammonium, aminomethylphosphonic acid, and glyphosate were 2.5, 1, and 10 ppb, respectively, which are at least 20 times lower than the tolerance limits established by the U.S. Environmental Protection Agency. Thus, we demonstrated that LESA–CE is a quite sensitive and convenient method to determine analytes on a solid surface avoiding the dilution from sample pretreatment procedures including homogenization of a bulk sample.