Gel routes to environmental catalysts

Various methods for the preparation of metal oxide catalysts for environmental control purposes are described. These include coprecipitation, sol-gel, and impregnation, and are used to prepare mixed oxide catalysts of the types SnO₂-MO₂ (M=Ce or Zr), SnO₂-Ln₂O₃ (Ln = lanthanide), Ln-doped CeO₂, Cr (VI)-doped SnO₂, and Cu(II)-doped SnO₂. The aggregation in stable colloidal sols of SnO₂, CeO₂ and ZrO₂ is dependent on the concentration of the metal oxide. Techniques for the characterisation of these catalyst materials include gas adsorption, X-ray diffraction, and TEM/EDXA.     

顶空固相微萃取-气相色谱-质谱法测定废水中痕量挥发性烷基硫化物

建立了顶空固相微萃取(HS-SPME)和气相色谱/质谱(GC/MS)联用测定人工湿地废水中的痕量挥发性烷基硫化物的方法。针对废水中两种主要的挥发性烷基硫化物(二甲基硫、二甲基二硫),详细研究了萃取纤维头的种类、萃取时间、萃取温度、pH值、离子强度、样品量及解析条件对HS-SPME的影响。载气为高纯氦气,流速为1.0mL/min,色谱柱为DB-5ms毛细管柱(0.25μm,30m×0.32mm),柱温:25℃(5min)■40℃(1min)■60℃(5min);在优化的实验条件下,本法测定二甲基硫及二甲基二硫的线性范围分别为10～10000ng/L和1～10000ng/L;检出限(3σ)分别为1.9ng/L和1.8ng/L;相对标准偏差小于10%;回收率分别为81.0%～94.6%和84.0%～100.9%。用二乙基硫为内标物质,将本法用于人工湿地废水中主要的烷基硫化物二甲基硫和二甲基二硫的测定,获得满意结果。     

环境水样中硒形态分析的样品预处理

综述了近几年来测定环境水样中硒的样品前处理方法,主要包括样品消解,加入基体改进剂和分离富集3个方面。消解法中主要使用湿法消解;加入基体改进剂适用于石墨炉原子吸收光谱法的样品预处理,可以提高硒的灰化温度,减少硒的损失以及样品中基体的干扰;固相萃取法是萃取法的主要使用手段。     

Improving MCM‐41 as a Nitrosamines Trap through a One‐Pot Synthesis

Copper oxide was incorporated into MCM‐41 by a one‐pot synthesis under acidic conditions to prepare a new mesoporous nitrosamines trap for protection of the environment. The resulting composites were characterized by XRD, N₂ adsorption–desorption, and H₂ temperature‐programmed reduction techniques, and their adsorption capabilities were assessed in the gaseous adsorption of N‐nitrosopyrrolidine (NPYR). The adsorption isotherms were consistent with the Freundlich equation. The copper salt was deposited onto MCM‐41 during the evaporation stage and was fixed on the host in the calcination process that followed. MCM‐41 was able to capture NPYR in air below 373 K but not at 453 K. Loading of copper oxide on MCM‐41 greatly improved its adsorption capability at elevated temperatures. The influence of the incorporation of copper into MCM‐41 samples and the adsorption behavior of these samples are discussed in detail.     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

环境监测实验室管理系统的开发与应用

基于2005版《计量认证/审查认可(验收)评审准则》要求,为满足环境监测实验室业务流程而设计开发了信息管理系统。该系统主要用于环境监测实验室的资源管理和日常自动化办公。系统采用B/S架构,实现全球化办公运作,能对监测样品的受理、分发、分析、原始记录、监测报告、数据三级审核、报告签发实现全程自动流转,并运用工作流和智能表单设计实现实验室程序文件中各类程序和日常办公事务流程的执行;原始记录和监测报告全部实现自动归档及智能查询;同时根据2005版准则中的要求,对人员、设备、材料、环境要素、记录、质量控制等所有要素全面实施网络化管理。     

The Influence of Intermolecular Interactions on Second-Order Susceptibilities of Molecular Crystals: Application to the m-Nitroaniline Crystal

The effects of intermolecular interactions on the second-order susceptibilities (⁽²⁾) of molecular crystals are studied by using a semiempirical quantum–chemical method. These effects are discussed on the basis of the super-molecular approach. The influence of the electrostatic interactions between adjacent unit cells on the tensor components of ⁽²⁾ was modeled by using the technique of cumulative atomic multipole moments (CAMMs).     

Spherical molecularly imprinted polymers (SMIPs) via a novel precipitation polymerization in the controlled delivery of sulfasalazine

Spherical molecularly imprinted polymers (SMIPs) have been prepared via a novel precipitation polymerization using sulfasalazine (prodrug used in the diseases of the colon) as template. The sulfasalazine was incorporated into SMIPs and into a spherical non-imprinted polymer (control), and then the release rate of the bioactive agent at different pH values was evaluated. Considerable differences in the release characteristics between imprinted and non-imprinted polymers have been observed. This opens the possibility of the development of drug release systems capable of modulating the release of a specific molecule. Photomicrography of spherical molecularly imprinted polymers (SMIPs).     

酚类环境雌激素的色谱分析方法

综述了近年来酚类环境雌激素的色谱分析研究进展,包括气相色谱和气质联用,高效液相色谱和各种检测器联用技术。比较了使用气相色谱和液相色谱两种方法的优缺点,并对环境雌激素样品预处理作了介绍。     

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric method for the simultaneous determination of cyclophosphamide, methotrexate and 5-fluorouracil as markers of surface contamination for occupational exposure monitoring

A new high-performance liquid chromatographic/electrospray ionization tandem mass spectrometric (HPLC/ESI-MS/MS) method was developed for the simultaneous quantification of 5-fluorouracil (5FU), methotrexate (MTX) and cyclophosphamide (CP) in environmental samples. These compounds, commonly used in the treatment of cancer, are recognized as genotoxic. In order to estimate the occupational exposure of hospital personnel handling these drugs, wipe samples were taken from the working surfaces and directly analyzed (with trophosphamide as internal standard) using a reversed-phase capillary column and MS/MS detection. This is the first HPLC/MS/MS method for the simultaneous determination of 5FU, MTX and CP. The present method offers high sensitivity, with detection limits of 1.1 microg l(-1) for MTX and CP and 33.3 microg l(-1) for 5FU, avoiding any sample preconcentration procedure. Rapidity, specificity, high accuracy (mean values between 92.4 and 99.9%) and precision (mean RSD values between 3.4 and 12.1%) make the method suitable for the routine determination of these three antineoplastic drugs.