Effect of Sulfate on an Iron Manganese Catalyst for Fischer-Tropsch Synthesis

The effect of sulfate on Fischer-Tropsch synthesis performance was investigated in a slurry- phase continuously stirred tank reactor(CSTR)over a Fe-Mn catalyst.The physiochemical properties of the catalyst impregnated with different levels of sulfate were characterized by N_2 physisorption,X-ray photoelectron spectroscopy(XPS),H_2(or CO)temperature-programmed reduction(TPR),Mφssbauer spectroscopy,and CO_2 temperature-programmed desorption(TPD).The characterization results indicated that the impregnated sulfate slightly decreased the BET surface area and pore volume of the catalyst, suppressed the catalyst reduction and carburization in CO and syngas,and decreased the catalyst surface basicity.At the same time,the addition of small amounts of sulfate improved the activities of Fischer- Tropseh synthesis(FTS)and water gas shift(WGS),shifted the product to light hydrocarbons(C_1-C_(11)) and suppressed the formation of heavy products(C_(12 )).Addition of SO_4~(2-)to the catalyst improved the FTS activity at a sulfur loading of 0.05-0.80 g per 100 g Fe,and S-05 catalyst gave the highest CO conversion(62.3%),and beyond this sulfur level the activity of the catalyst decreased.     

Solubilization of methane,ethane, propane andn-butane in aqueous solutions of sodium dodecylsulfate

The solubilities of methane, ethane, propane, and n-butane were measured in aqueous solutions of sodium dodecylsulfate (NaDS) (0–0.1M) from 15 to 27°C. From these measurements the standard Gibbs energies, entropies, and enthalpies for the process of transferring the solute molecules from the gaseous phase into the solutions were calculated. An approximate relationship was found relating the volume fraction of the micelles to NaDS concentration.     

毛细管胶束电动色谱对复方药物有效成分的定量研究

本文报道采用毛细管胶束电动色谱法对复方药物去痛片和感冒灵中有效成分进行了分离和定量研究。以0.05毫米内径、45厘米长的弹性石英毛细管为分离柱,用十二烷基硫酸钠胶束溶液,在选定的实验条件下,各组分在十几分钟内就能很好的分离。采用两点内标法定量,所得结果与HPLC法测定结果相一致。该法具有装置简单,无需价格昂贵的分离柱,样品预处理简单等优点,可在药物分析中推广。     

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous,low-concentrated polyacrylamide gels

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.     

Synthesis of C8-glycomimetics as potential glycosidases inhibitors

The synthesis of C8-glycomimetics is described from C₂-symmetrical polyhydroxylated cyclooctenes derived from carbocyclisation of enantiomerically pure 1,9-dienes by ring closing metathesis. Their obtention notably involved either hydroboration followed by oxidation to carbasugars or to cyclooctanones then reductive amination, or formation of a cis-cyclic sulfate followed by successive introduction of an azido group, reduction and subsequent reductive amination. The biological activity of the C8-carbasugars and related aminocyclitols, analogous to voglibose, has been evaluated towards several commercially available glycosidases.     

ESR study of photooxidation of phenothiazines in aqueous micellar solutions

The mechanism of photooxidation of phenothiazine in liquid and frozen (77 K) aqueous micellar solutions of the surfactant (sodium dodecyl sulfate) was studied by ESR. The main reaction of electrons formed by the photochemical oxidation of phenothiazine in a liquid micellar solution of the anionic surfactant is the reduction of molecular oxygen dissolved in the aqueous bulk phase. 10-Methylphenothiazine was used as a stable radical cation probe in a liquid solution. The influence of electrolytes on the photoionization yield in both frozen and liquid solutions of the surfactant was studied.     

Cytochrome c–dimyristoylphosphatidylglycerol interactions studied by asymmetrical flow field-flow fractionation

Lipid membranes are well recognized ligands that bind peripheral and integral proteins in a specific manner and regulate their function. Cytochrome c (cyt c) is one of the partner peripheral protein that binds to the lipid membranes via electrostatic and hydrophobic interactions. In this study, asymmetrical flow field-flow fractionation (AsFlFFF) was used to compare the interactions of cyt c with the acidic phospholipid 1,2-dimyristoyl-sn-glycero-3-phospho-rac-glycerol (DMPG), oleic acid (OA), and sodium dodecyl sulfate (SDS). The influence of pH and the cyt c–lipid molar mass ratios were evaluated by monitoring the diffusion coefficients and particle diameter distributions obtained for the free and lipid-bound protein. The hydrodynamic particle diameter of cyt c (pI 10) was 4.1 nm at pH 11.4 and around 4.2 nm at pH 7.0 and 8.0. Standard molar mass marker proteins were used for calibration to obtain the molar masses of free cyt c and its complexes with lipids. AsFlFFF revealed the binding of cyt c to DMPG and to OA to be mainly electrostatic. In the absence of electrostatic interactions, minor complex formation occurred, possibly due to the extended lipid anchorage involving the hydrophobic cavity of cyt c and the hydrocarbon chains of DMPG or SDS. The possibility of the formation of the molten globule state of cyt c, induced by the interaction between cyt c and lipids, is discussed.Electronic Supplementary Material Supplementary material is available for this article at     

Effect of Neck Formation on the Measurement of Dynamic Interfacial Tension in a Drop Volume Tensiometer

Dynamic interfacial tension values obtained by drop volume tensiometry will be affected under certain experimental conditions by the formation of a neck between the drop and the capillary tip. This phenomenon must be accounted for to obtain accurate values of interfacial tension. In this work, neck formation for a water–mineral oil system is studied under conditions where hydrodynamic effects can be neglected. A model originally developed for the determination of the surface tension of a suspended drop is modified for application to dynamic interfacial tensions of surfactant-containing liquids. The model relates apparent values of interfacial tension calculated from drops possessing necks to actual values. Experiments with Span 80 (sorbitan monooleate) and sodium dodecyl sulfate (SDS) surfactants in a mineral oil–water system are used to test the validity of the developed model. For the small tip diameter used, good agreement is obtained for Span 80 up to the critical micelle concentration, and for low concentrations of SDS, when the surfactant adsorption is diffusion-limited. In both cases, the neck diameter of the growing drop can be considered constant over the range of dynamic interfacial tensions tested.     

Poly(N-isopropylacrylamide). I. Interactions with sodium dodecyl sulfate measured by conductivity

Conductometric titration of poly(N-isopropylacrylamide) (polyNIPAM) with sodium dodecyl sulfate (SDS) gave two apparent transitions labeled C1 and C2. The C1 transition was independent of polyNIPAM concentration in the 0.05–0.3 wt % range, whereas C2 was proportional to the polymer concentration. C1 corresponded to the onset of binding of surfactant with polymer. Arguments based on a simple mass action model for micellization are presented to show that C2, the second transition, is not due to any simple explanation such as being the point above which only free micelles are formed with surfactant addition. The cloud point of polyNIPAM increased with the amount of bound surfactant. This was attributed to electrostatic contribution of bound sulfate groups to the increased solubility of polyNIPAM. © 1993 John Wiley & Sons, Inc.     

Molecular interactions between lipid bilayers and a water-soluble polymer

Molecular interactions between lipid bilayers (liposomes) and chondroitin sulfate C (CS), a water soluble polymer, have been investigated in terms of zeta-potential, particle size, microscopic-viscosity, microscopic-polarity of liposomes and permeability of calcein. Microscopic morphology is dramatically changed by the addition of CS to the positively charged liposomes (Pos.L), while it is not changed by the addition to uncharged liposomes (Unc.L) or negatively charged liposomes (Neg.L). The absolute value of the particle size of Pos.L increases with the addition of CS, while the zeta- potential of Pos.L decreases. Permeability of Pos.L decreases with an increase in the concentration of CS. Phase transition temperature of Pos.L is changed after the addition of CS. These values, however, are not changed for the other liposomes by the addition of CS. The results of gel filtration chromatography show that CS is absorbed on the Pos.L surface. Microscopic viscosity is also increased by the addition of CS to Pos.L due to the adsorption of CS.