The influence of reverse energy transport on emission anisotropy in two-component viscous solutions

The effect of nonradiative reverse energy transport (NRET) in two donor-acceptor systems was studied experimentally. It was found that the NRET occurring in system I; rhodamine 6G (donor) and rhodamine B (acceptor), considerably lowers the emission anisotropy at medium and high concentrations. These results qualitatively confirm the predictions of the approximate theoretical approach of L. Kulak and C. Bojarski (see the preceding paper). In system II; rhodamine 6G (donor) and Nile Blue (acceptor), for which the NRET process does not occur, a good agreement with no-back-transport theory was obtained.     

Growth and Spectral Properties of Yb^3＋-doped Ba3Gd（BO3）3 Crystal

Crystal of Yb3+-doped Ba3Gd(BO3)3 has been grown by the Czochralski method. The spectroscopic characterizations have been investigated at room temperature. The Yb3+:Ba3Gd(BO3)3 crystal exhibits broad absorption at 976nm with FWHM of 7nm and large overall spitting of 2F7/2 manifold (823cm-1). The absorption and emission cross sections are 5.09×10-21cm2 at 976nm and 0.97×10-21cm2 at 1040nm,respectively. The fluorescence lifetime is 2.84 ms.     

ZnO荧光粉中的紫外发射和绿色发射之间的关系

通过在低氧分压和真空中热处理ZnO粉末, 获得了ZnO荧光粉. ZnO荧光粉有两个发射谱带, 分别位于380 nm(紫外)和510 nm(绿色). 紫外谱带对应于ZnO中的激子发射, 是一个单中心发光过程；绿色谱带是一个复合发光过程, 与ZnO中的本征缺陷相关, 如氧空位、锌空位等. 实验表明, 高密度的激发条件有利于紫外发射, 而低氧分压下的热处理有利于提高绿色发射谱带的强度. 研究结果还表明, 与紫外发射相联系的激子可向与本征缺陷相联系的绿色发光中心传递能量, 这种传递可能是通过激子扩散实现的.     

Photoinduced rotational isomerization mechanism of 2-chlorobenzaldehyde in low-temperature rare-gas matrices by vibrational and electronic spectroscopies

Rotational isomerization of 2-chlorobenzaldehyde in low-temperature rare-gas matrices has been investigated by vibrational and electronic spectroscopies with aids of the density functional theory (DFT) and configuration interaction single (CIS) calculations. Infrared spectrum of the less stable O-cis isomer, produced from the more stable O-trans isomer upon UV irradiation, is measured with an FT-IR spectrophotometer. The enthalpy difference between the O-cis and O-trans isomers is estimated to be 9.7±0.2 kJ mol⁻¹ from the temperature dependence of the infrared band intensities. Analyses of the infrared and electronic absorption spectral changes after UV irradiation and the phosphorescence spectra measured at various excitation wavelengths suggest that the rotational isomerization occurs via the intersystem crossing from S₁ to T₁.     

Determination of trace metals in industrial boron carbide by solid sampling optical emission spectrometry. Optimization of DC arc excitation (current, atmosphere and chemical modifier)

Graphite arc emission spectrometry has become possible as a result of the invention of novel types of optical spectrometers with Echelle-optics and semiconductor array detectors, and by the application of electronically controlled, high current arc generators. An optimization of the excitation parameters to boron carbide analysis is reported here, measuring background corrected line intensities that were integrated for the time of total evaporation of 5 mg boron carbide sample with or without added chemical modifiers. The following set of experimental conditions were compared with respect of analytical sensitivity and precision: (A) no modifier, Ar + O₂ (20%), 16 A; (B) sample + graphite powder (1 + 1), Ar + O₂ (20%), 16 A; (C) sample + CaF₂ (1 + 1), Ar, 25 A; (D) sample + CaF₂ + graphite powder (1 + 1 + 1), Ar, 25 A. The graphite powder modifier resulted in improved precision in general, and the CaF₂ was effective as a plasma ionization buffer and fluorinating agent. The best compromise was found under conditions B, when oxygen was present in the discharge atmosphere. This is likely due to the stepwise conversion of the boron carbide matrix to the more volatile boron oxide. Under conditions B, detection limits in the ranges of 0.3–9 μg g⁻¹ for Al, Ca, Cr, Cu, Fe, Mg, Mn and Si and that of 18–38 μg g⁻¹ for Ti, W, and Zr were attained. Average RSDs of 10.2 and 9.7% were found, respectively, without and with internal referencing to boron.     

Gas chromatographic determination of organolead compounds with an alternating current plasma detector

The performance of the gas chromatography/alternating current plasma detector as a selective detector for organolead compounds is investigated. The helium make-up flow rate and the spatial position from which the lead emission is viewed, have an effect on the detector response. The detection limit for tetrabutyl lead was established as 130 pg/s and the lead selectivity ratio was found to exceed 13,800. Some applications of organolead determination in complex matrices were also studied in order to demonstrate the selectivity and sensitivity of the alternating current plasma detector.     

Optoacoustic Laser Stark spectroscopy and FIR laser action on CH3Br using a waveguide CO2 laser

The optoacoustic spectrum of CH₃Br around 10 m band lines of a tunable cw waveguide CO₂ laser is investigated. Several new infrared absorptions are observed and most of the correspond ing molecular transitions are assigned. Far infra red laser action is reported by pumping with the same CO₂ laser: pump offsets are given using the Transferred Lambs dip (TLD) technique. A new FIR laser emission is obtained and assigned. An optoacoustic Laser Stark spectroscopy technique is used to investigate off resonance infrared tran sitions.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Indirect atomic absorption and atomic emission spectrometric determination of antazoline,hydralazine and amiloride hydrochlorides and quinine sulphate

Ion-association complexes of antazoline HCl [I], hydralazine HCl [II], amiloride HCl [III] and quinine sulphate [IV] with [Co(SCN)₄]^2– and [Co(NO₂)₆]^3– were precipitated and the excess unreacted cobalt complex was determined. A new method using atomic emission and atomic absorption spectrometry for the determination of the above drugs in pure solutions and pharmaceutical preparations is given. The drugs can be determined in the ranges 0.3–3.0, 0.19–1.96, 0.3–3.0, and 0.78–7.82 mg/25 ml solutions of I, II, III, and IV, respectively, with mean relative standard deviations of 0.65–2.03 % and recovery values of 95.76–101.2% indicating high precision and accuracy.     

Field and photo-field electron emission from self-assembled Ge–Si nanostructures with quantum dots

Monolayer and multilayer Ge nanocluster structures were prepared on Si(1 0 0) using molecular beam epitaxy. The cluster size was 10 nm and cluster density was 10¹⁰ cm⁻². A stable field electron emission was obtained from these structures, showing current peaks in the current–voltage characteristics, which may be attributed to the resonant electron tunneling via the energy levels of the nanocluster potential well. For cluster multilayers, the current–voltage curves also showed current peaks with a complex shape. The cluster multilayer structures had a considerable temperature sensitivity, as well as photosensitivity, in the wavelength range from 0.4 to 10 μm.