基于悬臂梁调谐技术的光纤光栅无源振动监测

采用匹配光纤光栅设计了一种结构简单的振动信号无源监测装置.该装置利用悬臂梁调谐技术能够将微小振动信号转化为光电探测器可探测的光强信号,利用示波器实现实时监测.实验中对振幅为3mm的简谐振动信号进行了监测,测量结果与振动频率一致,可测量7～20Hz的振动,信噪比不低于14.9dB.监测频率受限是因为悬臂梁的性质,如采用金属材料或者采用齿轮组对转子进行减速,该装置可探测更高的频率.     

用迈克耳逊干涉仪测量气体折射率的误差的研究

研究在用迈克尔逊干涉仪测量气体折射率时存在的系统和方法误差，提出了误差修正方法。     

遥感器CCD驱动器热设计及其在摄像过程中的温度变化

CCD驱动器是航天成像遥感器摄像过程中的主要热源之一。防止CCD驱动器过热是保证其正常工作的重要方面。介绍了遥感器的工作模式和对CCD驱动器采取的热控制措施。通过热平衡试验,利用回归的方法,对CCD驱动器在摄像过程中的温度变化规律进行了分析,同时对热控制效果进行了评估。CCD驱动器工作时升温速率在0.85℃/min左右,整个摄像过程中最高温度约为26℃,所实施的热控制措施效果理想。     

Organic synthesis based on cathodic deprotonation of acids

The results of studies on electrosynthesis involving carb- and heteroanions generated by cathodic deprotonation of acids (CDA), carried out in the laboratory headed by the author, are surveyed. These studies resulted in the elaboration of efficient electrochemical versions of the known Michaelis-Becker, Wittig-Horner, and Perkin reactions; electrochemical analogs of homolytic aromatic substitution, alkylation, heterocyclization,etc. were developed. Based on CDA, convenient and promising methods for preparing variousN-, O-, P-, S-, andC-alkylated and arylated substances have been developed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1411–1422, August, 1995.The author is grateful to Professor V. A. Dorokhov, Professor V. P. Litvinov, and researchers from the laboratories of N. D. Zelinsky Institute of Organic Chemistry headed by them, who participated in joint studies.The work was carried out with financial support from the International Science Foundation (Grant No. MHYOO).     

基于单光纤对模型的光纤束调制函数的建模与仿真

基于单光纤对光强调制特性的函数表达式,建立了双束型光纤束的调制函数,并引入一个虚拟轴间距参量,建立了随机型光纤束的光强调制函数.同时又在视内圈光纤束为单根粗光纤的情况下,建立了同轴I型和同轴型光纤束的光调制函数.在随机型和同轴型光纤束模型的基础上建立了双圈型(DC)和同轴随机型(C-R)光纤束的光调制系数.最后对上述光纤束的调制特性函数进行了计算机仿真实验.     

光纤机敏结构制作方法的研究

本文讨论机敏结构的制作方法、集成光纤传感器存在的问题、现有解决方法和今后的研究方向。     

用于曲面精密检测的新型光纤三角传感器研究

基于光纤传感技术和三角测量方法，提出了一种用于曲面检测的新型光纤三角传感器。根据所设计的轮辐式接收光纤结构，可以在测量曲面与传感头间位移时，首先获取被测点处微面元的倾斜信息，以便对传感器测量值进行实时误差修正，从而解决了被测表面倾斜对坐标测量带来的影响。该传感器还能有效地消除环境光干扰、光源波动、表面反射率变化等对测量带来的影响。建立了传感器测量的数学模型。理论分析和初步的实验结果证明了系统的有效性和实用性。该传感器系统不稳定性好于0.3%，横向分辨率好于8μm，高度分辨率好于0.1μm。     

Optical current transducer with bulk type Bi12SiO20 faraday sensor for power systems

Two types of optical current transducers (OCTs) have a bulk Faraday sensor inserted into the gap of an iron core and a porcelain insulator with optical fiber. The sensor consists of Bi₁₂SiO₂₀ (BSO) single crystal, a polarizer, and an analyzer. The OCTs satisfied the target performance requirement for fault location and metering and demonstrated maintained performance at some power utilities in Japan and the US. We have developed a fault location system that immediately detects the fault current with the OCTs, there by locating the fault section. The OCT can easily replace the existing support insulators for the disconnecting switch without any modifications to structure height or bus-bar. For metering requiring 0.3% class accuracy, use of a BSO with right optical rotatory power combined with BSO with left optical rotatory power results in a Faraday sensor with improved temperature characteristics. The OCT demonstrated 0.3% class accuracy for metering described in the current transformer Specifications of IEEE C57–13, 1993.     

光纤液位传感器检测原理探讨

叙述光纤液位传感器在贮油罐中的应用,提出实验所采用的方案。推导出液面高度公式,比较实现检测的两种电路的优缺点,同时对实验精度和测量范围进行了讨论。     

On Two Parallel Matched Gratings Demodulation Method of Fiber Grating Strain Sensor

The method of demodulation with two parallel matched fiber Bragg gratings( FBGs)system is introduced to enlarge the range of strain that can be detected by the FBG sensor system.