一个新颖的二茂铁羧酸混配合物的制备、晶体结构及电化学性质研究

本文以3-二茂铁羰基丙酸(L1)、1，1′-二茂铁二羰基-3，3′-双丙酸(L2)、2，2′-联吡啶胺(dpa)以及Zn(Ac)₂·2H₂O为原料合成了一个结构新颖的混配合物[Zn₂(L1)₂(L2)(dpa)]。X-射线单晶衍射分析表明，该配合物是一个中心对称的双核配合物，并在N-H…O氢键和C-H…O氢键的作用下形成了二维的超分子化合物。采用差示脉冲对该配合物的电化学性质进行了初步的研究。     

尖晶石锂锰氧化物锂离子嵌脱过程的交流阻抗谱研究

用粉末微电极研究了尖晶石锂锰氧化物在不同嵌锂状态下嵌脱锂过程的交流阻 抗图谱，提出了新的等效电路模型。描述锂离子在固体中扩散的Warburg阻抗与累 积或消耗的嵌入电容在Lix MnO4中的x≤0．5时串联，0．5＜x≤1时并联。用提出 的等效电路模型分阶段拟合了实验所得的交流阻抗谱，拟合值与实验值相当吻合， 由拟合结果得到不同电位下锂离子在表面膜中的迁移电阻和电容，界面电荷传递电 阻，双层电容，锂离子在固体中扩散系数和累积或消耗的嵌入电容。     

Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate （CTriMATT） were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction （XRD）, Fourier transform infrared （FT-IR）, Ultraviolet visible （UV-Vis） spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS4^2-. Thermogravimetric analysis （TG）, differential thermal analysis （DTA） and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition, the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption （BET） and scanning electron microscopy （SEM）. The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.     

来曲唑的合成、表征及晶体研究

合成了抗癌药物4,4′-(1H-1,2,4-三唑-1-亚甲基)-双-甲苯基氰,测定了其IR, NMR和单晶结构,晶体C17H11N5属单斜晶系,空间群P21/n,晶胞参数:a=0.70300(14) nm, b=1.6170(3) nm, c=1.3360(3) nm, β=104.80(3)°, Z=4.结构解析最终一致性因子R1=0.0897.分子间通过氢键和范德华力形成超分子结构.     

Multistage Electrochemical Reactions with the Transfer of Intermediates between Near-Electrode Layer and Bulk Solution: Analysis of a Kinetic Model and Computer-Aided Modeling

Kinetic equations for a multistage electrode process complicated by the transfer of intermediates between the near-electrode layer and bulk solution are derived and analyzed. Computer-aided modeling of the kinetics of processes of this kind is performed. Conditions under which the share of diffused intermediates is no longer vanishingly small are determined. Effect of various factors on the individual stages is established. Techniques of processing experimental data for determining kinetic parameters of separate stages are suggested.     

离聚体的结构表征——Ⅴ.含氟离聚体中离子微区稳定性的研究

本文用DSC方法研究了羟酸型含氟离聚体中不同金属离子种类、可离子化基团含量、配位结构单元构型及离子微区大小对离聚体中离子微区稳定性的影响。实验表明:离聚体中金属离子配位能力愈强,羟酸含量愈高,离子微区尺寸愈大,则相应离聚体中离子微区稳定性愈大。铅高聚体>锌离聚体>钙离聚体>钠离聚体。     

导电性聚西佛碱的研究：Ⅰ含硫聚西佛碱的合成,性能及表征

采用对氯苯甲醛和联苯二胺为原料,合成了4,4′-二氯代苄叉联苯胺,发现该化合物具有热致液晶性。利用所合成的二氯代化合物与硫化钠在醋酸锂催化下缩取得得到了含硫聚西佛碱探讨了高分子量含硫聚西佛碱的合成方法。测出该含硫聚西佛碱具有3.4×10~(-11)S/cm本征导电率。使用红外光谱、元素分析等方法表征了所合成的聚合物。     

Electrochemically induced formation of organomercury compounds

A procedure for the alkylation of metallic mercury by (dimethylglyoximato)butylcobalt(III) electrochemically generated in the presence of butyl bromide is proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 309–312, February, 1994.     

Supercritical fluid chromatography of industrial paraffins and waxes

Summary The application of capillary SFC for SIMDIST investigations of paraffins and waxes is reported. Pressure, density and temperature of the mobile phase are optimized to obtain high chromatographic resolution of complex mixtures of industrial products. Isothermal linear pressure programming and asymptotic pressure and density programming are used in the range from 15 to 35 MPa in the isothermic mode above 100°C. SFC chromatograms of natural and synthetic paraffins, microcrystalline wax and candle wax are compared. The retention behaviour of paraffin mixtures and waxes has been investigated on methyl/phenyl and biphenyl capillary columns. The polarity of the stationary phases influences the absolute retention time more than it influences the chromatographic resolution.     

Properties and Photoelectrocatalytic Behaviour of Sol-Gel Derived TiO2 Thin Films

Titanium dioxide (TiO₂) thin films have been prepared on indium doped tin oxide (ITO) glass by sol-gel dip-coating method. Properties of the films were determined as a function of heat-treatment by X-ray diffraction, scanning electron microscopy and photoelectrochemical tests. The films heat-treated at higher temperatures show better crystallinity and photoresponse. The microscopic structure on the film after heat-treatment is attributed to the incorporation of organic polymer into the precursor solution. The performance of the electrodes treated at different temperature on photoelectrocatalytic degradation of methyl orange was investigated. The effect of applied potential and the ability of the electrode to be repeatedly used in photoelectrocatalytic degradation were also evaluated.