Natural zeolitic material of the clinoptilolite type doped with iodine and its ions

The aim of this study was the preparation of natural zeolitic materials doped with iodine and its ions. Natural zeolite from an East Slovakian deposit was used. The content of iodine in the zeolitic products depended on the experimental conditions used for the preparation. The products and their intermediates obtained at 100, 200, 400 and 900°C were identified.     

导电聚苯胺/钙基膨润土复合材料的制备

采用插层聚合法制备了导电聚苯胺/钙基膨润土、聚苯胺/有机化膨润土复合材料.以电导率为考核指标,通过正交设计优化了苯胺的加入量、反应温度和反应时间等参数.结果表明,苯胺的加入量影响较显著,反应温度对聚苯胺/有机化膨润土复合材料影响较聚苯胺/钙基膨润土体系明显,反应时间的延长,有利于聚苯胺/有机化膨润土复合材料电导率的提高.聚苯胺/钙基膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为0℃,反应时间为6 h;聚苯胺/有机化膨润土复合材料制备的最佳工艺条件为:苯胺加入量为70%,反应温度为室温,反应时间为8 h.利用红外光谱(FT-IR)、X射线衍射(XRD)和四探针技术表征了材料的组成、结构和性能.结果表明:膨润土经有机化后,晶面间距增大较多;苯胺单体与钙基膨润土插层聚合后,膨润土晶面间距增大不多;苯胺单体与有机化膨润土复合后,破坏了膨润土的晶格结构,形成了混杂复合体系,电导率达10-3S.cm-1.     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

A Procedure for Transforming Impedance Spectra for the Determination of Mechanism of Electrochemical Reactions

Transformation of impedance spectra into relaxation time spectra (RTS) is used for determining contributions of individual processes of the oxygen electroreduction reaction (OER) to the polarization resistance of the electrochemical cell. The transformation technique involves the solution of the convolution equation found with the aid of a modified Van Cittert iteration algorithm checked on model impedance spectra. The technique, when used to analyze impedance spectra of electrochemical cells air|Pt|YSZ|YSZ + Pt|air, shows that the conversion of a globular structure of the YSZ + Pt cermet layer to a columnar one is accompanied by a change of peak amplitudes in RTS. The revealed RTS dynamics when heated to 750°C is compared with peculiarities of individual processes in OER.     

Synthesis, Electrical Properties, and Powder Neutron Crystal Structure Refinement of Pb1−xBixPt2O4 Compounds (0≤x≤0.3)

Substitution of Pb for Bi in the recently characterized mixed-valence lead-platinum oxide PbPt₂O₄ was attempted and a Pb_1−xBi_xPt₂O₄ solid solution was obtained for 0≤x≤0.3. Powder X-ray diffraction study showed that all substituted compounds crystallize with similar triclinic unit cell and PbPt₂O₄ lattice parameters. The structural model of Pb_0.7Bi_0.3Pt₂O₄ was refined from powder X-ray diffraction data using the Rietveld method and the results indicate the same crystal structure than PbPt₂O₄ with one mixed Pb/Bi atomic site. Neutron diffraction realized on the two limit compositions of the solid solution (x=0 and 0.3) allowed to confirm the PbPt₂O₄ and Pb_0.7Bi_0.3Pt₂O₄ stoichiometries. Mean oxidation degree of Pt atoms in the [PtO₄] infinite chains decreases from +3 for PbPt₂O₄ to +2.7 for Pb_0.7Bi_0.3Pt₂O₄. Conductivity measurements show a metallic behavior for all the compositions except the limit composition x=0.3 for which a semiconducting behavior appears.     

Determination of Inorganic Ions in Fertilizer Industry Wastewater by Ion Chromatography

The aim of this work is development of methodology for analysis of inorganic cations (sodium, ammonium, potassium, magnesium and calcium) in fertilizer industry wastewater. Method development includes optimization of eluent flow rate and concentration of eluent competing ion in order to obtain optimal separation within reasonable analysis time. For that purpose artificial neural network retention model was developed and used in combination with normalized resolution product criteria function. Developed artificial neural network retention model shows good predictive ability R² ≥ 0.9983. The determined ion chromatographic parameters enable baseline separation of all components of interest. By performing validation procedure and number of statistical tests it is shown that developed ion chromatographic method has superior performance characteristic: linearity R² ≥ 0.9984, recovery = 99.81% − 99.44%, repeatability RSD ≤ 0.52%. That result proves that proposed method can be used for routine monitoring analysis in fertilizer industry.     

PMMA/定向碳纳米管复合材料导电与导热性能的研究

Methyl Methacrylate(MMA) has been filled in the apertures of aligned carbon nanotubes(ACNTs). Then PMMA/ACNTs composites have been synthesized by in-situ polymerization. The SEM results show that carbon nanotubes are well dispersed and directionally arranged in the composites. The electrical conductivities of the parallel direction (parallel with ACNTs) and perpendicular direction (perpendicular with ACNTs) of composites were respectively tested to be 15 S·cm^-1 and 4 S·cm^-1, so the composites were conductivity anisotropic. Compared with PMMA, the thermal stable temperature of composites in air was improved by 100 ℃,and the thermal conductivity of composites was 13.64 times of PMMA.     

Die Gadoliniumcarbidhalogenide Gd4C2X3 (X = Cl,Br)

The Gadolinium Carbide Halides, Gd₄C₂X₃ (X = Cl, Br) The compounds Gd₄C₂X₃ (X = Cl, Br) and Tb₄C₂Br₃ have been prepared by reaction of the metals (RE), REX₃, and C in sealed Ta capsules at 1 100° and 1 300°C, respectively. Monophasic samples of Gd₄C₂Br₃ and Tb₄C₂Br₃ were obtained by reacting stoichiometric mixtures of the starting materials for five days. The needle shaped crystals are bronze-coloured and sensitive to air and moisture. Gd₄C₂X₃ crystallizes in the space group Pnma (No. 62) with lattice constants a = 1 059.6(4), b = 368.4(1), c = 1 962.7(8) pm (Gd₄C₂Cl₃), a = 1 084.4(1), b = 373.0(1), c = 2 036.1(1) pm (Gd₄C₂Br₃). According to Guinier photographs, Tb₄C₂Br₃ is isotypic (a = 1 074.3(2), b = 370.6(1), c = 2 019.4(1) pm). In the crystal structure C is octahedrally coordinated by Gd. The Gd₆ octahedra are linked via common edges to form corrugated layers. The X-anions coordinate all free edges and corners of these layers and connect them via Xⁱ? Xⁱ contacts parallel [001]. Gd₄C₂Br₃ shows metallic conductivity. The magnetic susceptibility follows at high temperatures a Curie Weiss law with an effective moment of 7.95 μ_B. At temperatures below 50 K antiferromagnetic order is observed.     

Chemical preparation of conductive elastomeric blends: Polypyrrole/EPDM. I. Oxidant particle-size effect

This work describes the preparation of polypyrrole and EPDM rubber blends, PPy/EPDM, by the sorption of pyrrole (vapor phase) in an EPDM matrix containing CuCl₂. We investigated the effect of the oxidant particle-size on the sorption and polymerization equilibrium, electrical conductivity, and mechanical properties of the blends. Independently of the CuCl₂ concentration and polymerization time, the polypyrrole weight fraction in the blend, X_ppy, increases when the oxidant particle-size in changed from 150–250 μm to smaller than 106 μm. For blends containing 50 phr of CuCl₂, obtained following 72 h of exposure to pyrrole, an increase in the Young's Modulus (from 2.2 ± 0.2 to 3.9 ± 0.6 MPa) and an increase in the electrical conductivity (from 10^?9 to 10^?7 S cm^?1) was observed when the oxidant particle-size was decreased. Infrared spectroscopy, thermogravimetric analysis, scanning differential calorimetry, and scanning electron microscopy were used in sample characterization. © 1994 John Wiley & Sons, Inc.     

Electrical Double Layer on Liquid Sn–Ga Alloy in Aqueous Solutions

Double-layer parameters of a liquid Sn–Ga electrode in aqueous electrolyte solutions are studied. It is shown that Sn in the alloy with Ga is a surface-active component and is forced out onto a surface layer of the electrode. The double-layer parameters of an Sn–Ga electrode (8 at. % Sn), which are measured in the experimentally accessible range of charges, differ radically from the parameters of Ga electrodes and are close to those of Sn electrode. Hence, an Sn–Ga electrode containing 8 at. % Sn simulates electrochemical properties of a liquid Sn electrode. The difference between reciprocal electronic capacitances of Hg and Sn and a corrected electrochemical work function of Sn are determined. It is shown that the chemisorption interaction of an Sn–Ga electrode with water molecules is virtually absent at charges more negative than –7 C/cm². A potential drop on uncharged Sn, which is associated with water chemisorption, is –20 mV. Thus, the hydrophilicity of Sn is slightly higher than that of Hg, Bi–Ga, Pb–Ga, and Tl–Ga and significantly lower than that of In–Ga, Cd–Ga, and Ga.