Photoluminescence-Based Techniques for the Detection of Micro- and Nanoplastics

The growing numbers related to plastic pollution are impressive, with ca. 70 % of produced plastic (>350 tonnes/year) being indiscriminately wasted in the environment. The most dangerous forms of plastic pollution for biota and human health are micro- and nano-plastics (MNPs), which are ubiquitous and more bioavailable. Their elimination is extremely difficult, but the first challenge is their detection since existing protocols are unsatisfactory for microplastics and mostly absent for nanoplastics. After a discussion of the state of the art for MNPs detection, we specifically revise the techniques based on photoluminescence that represent very promising solutions for this problem. In this context, Nile Red staining is the most used strategy and we show here its pros and limitations, but we also discuss other more recent approaches, such as the use of fluorogenic probes based on perylene-bisimide and on fluorogenic hyaluronan nanogels, with the added values of biocompatibility and water solubility.     

Solid‐State Active Elements Based on Dyes and Prepared by a Sol‐Gel Method

A new method is suggested for producing the solgel matrices with the molecules of laser dyes introduced into them. The curves of tuning lasing in Rhodamine 6G, Rhodamine 4S, Rhodamine 101, and phenylamine 430 in these matrices are obtained. The total range of tuning is 550–650 nm at a pumping energy of 4 mJ. The halfwidth of the generation spectrum is independent of the pumping energy to 4 mJ and comprises 0.3 ± 0.1 nm. The main factors forming the generation spectrum are noted.     

Design, synthesis, and characterization of a calcium-sensitive near infrared dye

Intracellular calcium concentration in biological cells varies from 0.1 to 10 μM depending upon cell signaling and disease states. A direct estimate of calcium concentration in cell tissues within this range is possible with a novel calcium-selective reagent 15C5-774. The molecule of 15C5-774 consists of a near-infrared (NIR) chromophore (λ_max=774 nm) and a metal complexing moiety of benzo-15-crown-5. The reagent shows a strong calcium binding affinity in a 1:1 ratio and metal selectivity in the order Ca²⁺>Mg²⁺>Sr²⁺≈K⁺≈Na⁺>Zn²⁺>Li⁺. The high sensitivity is achieved by conducting absorption measurements in the NIR region where background interference from the biological matrix is low.     

Solvent Relaxation in Phospholipid Bilayers: Principles and Recent Applications

Although there exist a number of methods, such as NMR, X-ray, e.g., which explore the hydration of phospholipid bilayers, the solvent relaxation (SR) method has the advantage of simple instrumentation, easy data treatment and possibility of measuring fully hydrated samples. The main information gained from SR by the analysis of recorded “time-resolved emission spectra” (TRES) is micro-viscosity and micro-polarity of the dye microenvironment. Based on these parameters, one can draw conclusions about water structure in the bilayer. In this review, we focus on physical background of this method, on all the procedures that are needed in order to obtain relevant parameters, and on the requirements on the fluorescence dyes. Furthermore, a few recent applications (the effect of curvature, binding of antibacterial peptides and phase transition) illustrating the versatility of this method are mentioned. Moreover, limitations and potential problems are discussed.     

Polystyrene Microspheres in Tissue-Simulating Phantoms Can Collisionally Quench Fluorescence

Tissue-simulating phantoms that replicate intrinsic optical properties in a controlled manner are useful for quantitative studies of photon transport in turbid biological media. In such phantoms, polystyrene microspheres are often used to simulate tissue optical scattering. Here, we report that using polystyrene microspheres in fluorescent tissue-simulating phantoms can reduce fluorophore quantum yield via collisional quenching. Fluorescence lifetime spectroscopy was employed to characterize quenching in phantoms consisting of a fluorescein dye and polystyrene microspheres (scattering coefficients _s 100-600cm^–1). For this range of tissue-simulating phantoms, analysis using the Stern-Volmer equation revealed that collisional quenching by polystyrene microspheres accounted for a decrease in fluorescence intensity of 6-17% relative to the intrinsic intensity value when no microspheres (quenchers) were present. The intensity decrease from quenching is independent of additional, anticipated losses arising from optical scattering associated with the microspheres. These results suggest that quantitative fluorescence measurements in studies employing such phantoms may be influenced by collisional quenching.     

Spectral‐Luminescence and Generation Properties of 1‐Aza‐2‐Methyl‐6‐Aminopyrene and of Its Protolytic Forms

Spectral manifestations of protolytic forms of 1aza2methyl6aminopyrene in ethanol and aqueous solutions are investigated. The ionization constants of the protolytic forms are determined. The generation properties and photostability of a neutral molecule and a cation in excitation by an excimer XeCl laser are studied.     

Spectral study on the molecular orientation of a tetracationic porphyrin dye on the surface of layered silicates

Tetracationic porphyrin dyes TMPyP and ZnPyP were intercalated into hydrophobized layered silicate films of three smectites. The smectites represented the layered silicate specimens of high (Fluorohectorite, Corning; FHT), medium (Kunipia F montmorillonite; KF) and low layer charge (Laponite, Laporte; LAP). The molecular orientations of the dye cations were studied by means of linearly-polarized ultraviolet-visible (UV-VIS) spectroscopy. The spectral analysis and consequent calculations of tilting angles of the transition moments at the wavelengths of Soret band transitions were in the range of 25°-35°. The determined angles indicated molecular orientation of the dye cations being almost parallel to the surface of the silicates. Slightly higher values (above 35°), determined for a FHT film, indicated either a slightly tilted orientation of the dye cations or the change of molecular comformation after the intercalation of the dye. Presented at 5-th International Conference Solid State Surfaces and Interfaces, November 19–24, 2006, Smolenice Castle, Slovakia     

新型菁类染料聚集体构筑和它的非线性光学特性研究

采用旋涂法制备了一种五甲川菁染料的超薄膜,利用原子力显微,椭偏仪、UV-Vis吸收光谱、红外光谱、小角X射线衍射等对薄膜的形貌和线性光谱性质进行了研究表征,结果表明染料在薄膜中形成了有序而稳定的J-聚集体,前向简并四波混频(DFWM)技术研究表明由于分子的聚集作用引起三阶非线性极化率的增大(χ(3)=2.55×10-12esu),利用激子耦合模型初步分析和讨论了产生非线性效应增强的内在机制。     

Photocatalytic degradation of rhodamine B by dye-sensitized TiO_2 under visible-light irradiation

Perylene tetracarboxylic diimide (PTCDI),widely used in organic photovoltaic devices,is an n-type semiconductor with strong absorption in the visible-light spectrum.There has been almost no study of the PTCDI-sensitized TiO2 composite used to photocatalytically degrade pollutants.In this study,PTCDIand copper phthalocyanine tetrasulfonic acid (CuPcTs)-sensitized TiO2 composites were prepared using a hydrothermal method.The morphologies and structures of the two composites were characterized by X-ray diffrac...     

Optical detection of Cu ion using a SQ-dye containing polymeric thin-film on Au surface

In this study, we have fabricated Cu²⁺ ion sensor using a squarylium dye (SQ-dye) containing polymeric thin-film. Surface Plasmon Resonance (SPR) was used as a signal amplifier to achieve high sensitivity and large linear dynamic range for detection of Cu²⁺ ion. High selectivity to Cu²⁺ ion was obtained by the effective electro-static interaction between SQ-dye and Cu²⁺ ion in the polymeric film. The optimal analytical condition of high selectivity and sensitivity in the wider linear dynamic range obtained in this study may be a result of the cooperative ‘hard-soft’ metal ion-ligand interaction and effective detection of refractive index changes by the complexation of Cu²⁺ ion and SQ-dye in SPR measurement. Among 10 different alkali metal, alkaline earth metal, and transition metal ions, SQ-dye in poly(vinylchloride)–poly(vinyl acetate)–poly(vinyl alcohol) (PVC–PVAc–PVA) copolymer film showed the highest selectivity to Cu²⁺ ion. Although the interaction between SQ-dye and metal ions has not been well understood, both cooperative ‘hard-soft’ metal ion-ligand interaction and size-selective recognition of Cu²⁺ ion to SQ-dye may contribute to high selectivity. Furthermore, additional sensitivity in the detection of Cu²⁺ ion by SPR was obtained by matching the wavelength of probing radiation of SPR and absorption maximum of SQ-dye at 675 nm, which allow to detect small changes in the refractive index by complex formation on the sensing surface. This result may apply in development of the Cu²⁺ ion selective sensor for medical, biochemical, and environmental applications.