CSNS RCS射频系统双谐波模式低电平控制模拟实验

介绍了中国散裂中子源/快循环质子同步加速器一期工程(CSNS-Ⅰ/RCS)拟采用的双谐波加速方案。针对该方案需要在加速周期内对8个射频腔之一进行工作模式切换的特殊要求,对设计实现的基于现场可编程门阵列（FPGA）技术的数字化低电平控制系统采取了一系列优化措施,包括模式切换时段控制回路的开环、功率源两级调谐回路的错时闭环等。在射频系统样机平台开展的模拟实验表明该低电平控制系统动态性能良好,双谐波方案可行性得到了一定程度的验证。     

原位成形光学微透镜的聚光性能研究

为解决荧光谱微检测系统中光学微透镜制作的困难,提出一种原位成形微透镜的制作方法,研究该微透镜的聚光性能,利用传统几何光学原理,分别推导出激发微透镜与检测微透镜的光线追迹方程,用该方程计算了2种微透镜的照射点分布几率,画出相应的分布曲线图,讨论了不同形状参数的微透镜对聚光性能的影响。研究结果表明,通过在光学胶中适当掺杂及打磨基底玻璃,可减小接触角,加大微透镜的形状参数,既能坚固透镜与基底间的粘接强度,又能提高微透镜的聚光本领。制作了使用原位成形光学微透镜的荧光谱微检测器,对生物荧光试剂进行了测试。实验结果表明,使用原位成形光学微透镜进行聚光,可使生物荧光谱强度提高4倍以上,通过在光学胶中掺杂以及打磨玻璃的办法,可以提高透镜的聚光本领约1.2倍。     

Antioxidant behaviour of 2′‐hydroxy‐chalcones: a study of their electrochemical properties

The electrochemical behaviour of 13 chalcone analogues was systematically studied by means of cyclic voltammetry and chronoamperometry at a glassy carbon (GC), gold and platinum working electrodes using two different supporting electrolyte/solvent combinations. It was found that chalcone analogues can be easily oxidized at both GC and gold working electrodes, but not at a platinum electrode. Principal component analysis was further employed to reveal similarities/dissimilarities between oxidation potentials, chronoamperometric signals and ability of the compounds to scavenge the reactive oxygen species H₂O₂. The study reveals the inverse proportional relationship between the scavenging ability of H₂O₂, expressed as IC₅₀, and chronoamperometric signal at 800 mV using gold as working electrode. Copyright © 2012 John Wiley & Sons, Ltd.     

我国封闭式投资基金业绩评价实证研究

随着我国基金行业超常发展,恰当的分析和评价基金业绩已越来越重要。本文根据CAPM的基本原理,利用国外先进的基金业绩评价方法对我国封闭式基金的综合业绩进行实证研究。研究结果表明:总体来看,基金获得的市场超额收益显著为负。基金经理不具有证券选择能力,但具有一定的市场择时能力,但这两种能力均不显著。同时,我们还发现不同投资风格的基金经理具有不同的证券选择能力和市场择时能力。     

Introduction to the overall physics design of CSNS accelerators

The China Spallation Neutron Source (CSNS) is an accelerator-based facility. The     

A novel cationic emulsifier used for preparing slow-cracking and rapid-setting asphalt: Synthesis,surface activity,and emulsification ability

A novel cationic emulsifier including nonionic fatty alcohol polyoxyethylene ether was synthesized in two steps from epichlorohydrin, octadecyl dimethyl amine, and fatty alcohol polyoxyethylene ether, and the intermediate product could also be used as an emulsifier. Their structures were characterized by FTIR, and the surface activities were investigated by surface tension, electrical conductivity, and HLB. The obtained results indicated that the critical micelle concentration (CMC) of the final product was low, 0.442 mmol/L, and the surface tension at the CMC was 41.02 mN/m. The hydrophile-lipophile balance (HLB) value was 12, which meet the requirements of asphalt emulsifiers. A series of experiments of the emulsified asphalt prepared by the emulsifiers were performed. The results showed that the emulsified asphalt could be stably stored for more than 5 days when the emulsifier was 2 wt% and the pH value was between 3 and 4. The result of demulsification experiments showed that the emulsifier is a slow-cracking and rapid-setting asphalt emulsifier.     

THE COURSE OF “STRUCTURAL MODEL DESIGN AND FABRICATION”

“知行统一” 的观念在教育界已深入人心,但是要做到切实履行却非易事。经过为期九年的精心打造,上海交通大学开设的创新型实践课程“结构模型设计与制作” 初步实现了“学与行” 的有机融合,教学效果显著,深受学生欢迎。本文是对该课程的总结与反思,希望对我国相关工科教学改革起到有益的借鉴作用。     

Surface influence on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel

Low-field nuclear magnetic resonance techniques are employed to extract information about the effects introduced by the interaction with the surface on the rotational and translational dynamics of molecules confined inside a mesoporous carbon xerogel. The molecules under study were water, cyclohexane, and hexane. They were chosen due to their different interaction strength with the carbonaceous matrix. Frequency dependent longitudinal relaxation measurements, using the fast field cycling technique, allowed extraction of the fractal dimension of the carbon xerogel surface. It was observed that the measured value is influenced by the molecule affinity to the surface. Diffusion measurements, using the pulse field gradient technique, have revealed that the stronger interaction with the surface of cyclohexane and hexane molecules leads to an increased diffusive tortuosity, as compared with water.     

“聚丙烯酸酯的合成及降凝性能评价”综合实验能力考核平台

设计了以柴油中饱和烃含量及碳数分布测定、聚丙烯酸高级醇酯（PTA）的合成与纯化、PTA的红外表征与分子量测定、PTA降凝性能评价等4个模块组成的综合实验,作为化工专业实验的考核及成绩评定平台。这种考核方式将过程考核与结果考核融合,将笔试、操作、设计融合,可以全面准确地考核学生的有机合成、仪器分析等基础实验技能,同时考核综述、数据处理、实验设计等综合实验能力和实验室工作素质。此外,还能够有效训练学生的学习能力、解决问题能力、实践能力和创新能力,并促进了实验教学水平提高。     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.