Positron annihilation studies of poly(N‐isopropyl acrylamide) gel in mixed solvents

Positron annihilation lifetime spectroscopy was used to characterize the reentrant volume‐phase‐transition behavior of poly(N‐isopropyl acrylamide) hydrogel in an ethanol/water mixed solvent. The polymer gel was synthesized with γ irradiation. The ortho‐positronium lifetime (τ₃) in the gel slowly increased with an increase in the ethanol content in the mixed solvent. τ₃ was not influenced by the volume phase transition. The ortho‐positronium intensity decreased with the collapse of the gel in an approximately 10% ethanol/water mixture. When swelled in pure ethanol, τ₃ initially increased with the solvent amount in the gel, showing the destruction of intramolecular hydrogen bonding and the relaxation of polymer chains. The lower critical solution temperature of the gel in the 10% ethanol/water mixture was lower than that in pure water, and τ₃ for various solvent contents showed behavior similar to that seen in pure solvent. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1028–1036, 2002     

G -函数与迭代阵谱半径的估计

该文应用G -函数概念, 获得了迭代矩阵谱半径新的上、下界, 所得结果推广和改进了文献[1--6]中的相应结果.这些结果适合于更广泛的矩阵类, 数值结果也表明在相同的条件下这些新界优于文献[1--6]中的界.     

Designs,Synthesis, Characterization and Direct Electrochemistry of Zinc‐Porphyrin Bearing Pyrene Noncovalent Functionalized Graphene Oxide Sheet

We have designed and synthesis a new compound of zinc‐porphyrin bearing four pyrene groups (ZnP‐t‐P(py)₄) and prepared a new hybrid materials of ZnP‐t‐P(py)₄ with graphene oxide (GO) via non‐covalent interactions. The ZnP‐t‐P(py)₄, along with four pendant pyrene entities ZnP‐t‐P(py)₄, stacking on the (GO) surface due to π‐ π interactions, has been revealed by AFM measurements. FTIR, UV‐vis absorption confirm the non‐covalent functionalization of the GO. Raman spectral measurements revealed the electronic structure of the GO to be intact upon hybrid formation. In this donor‐acceptor nanohybrid, the fluorescence of photoexcited ZnP‐t‐P(py)₄ is effectively quenched by a possible electron‐transfer process. The fluorescence and photoelectrical response measurements also showed that this hybrid may act as an efficient photoelectric conversion material for optoelectronic applications.     

Covalent Assembly of MoS2 Nanosheets with SnS Nanodots as Linkages for Lithium/Sodium‐Ion Batteries

Weak van der Waals interactions between interlayers of two‐dimensional layered materials result in disabled across‐interlayer electron transfer and poor layered structural stability, seriously deteriorating their performance in energy applications. Herein, we propose a novel covalent assembly strategy for MoS₂ nanosheets to realize unique MoS₂/SnS hollow superassemblies (HSs) by using SnS nanodots as covalent linkages. The covalent assembly based on all‐inorganic and carbon‐free concept enables effective across‐interlayer electron transfer, facilitated ion diffusion kinetics, and outstanding mechanical stability, which are evidenced by experimental characterization, DFT calculations, and mechanical simulations. Consequently, the MoS₂/SnS HSs exhibit superb rate performance and long cycling stability in lithium‐ion batteries, representing the best comprehensive performance in carbon‐free MoS₂‐based anodes to date. Moreover, the MoS₂/SnS HSs also show excellent sodium storage performance in sodium‐ion batteries.     

Dynamic Covalent Organocatalysts Discovered from Catalytic Systems through Rapid Deconvolution Screening

The first example of a bifunctional organocatalyst assembled through dynamic covalent chemistry (DCC) is described. The catalyst is based on reversible imine chemistry and can catalyze the Morita–Baylis–Hillman (MBH) reaction of enones with aldehydes or N‐tosyl imines. Furthermore, these dynamic catalysts were shown to be optimizable through a systemic screening approach, in which large mixtures of catalyst structures were generated, and the optimal catalyst could be directly identified by using dynamic deconvolution. This strategy allowed one‐pot synthesis and in situ evaluation of several potential catalysts without the need to separate, characterize, and purify each individual structure. The systems were furthermore shown to catalyze and re‐equilibrate their own formation through a previously unknown thiourea‐catalyzed transimination process.     

非负矩阵与有向图的谱半径

本文给出非负矩阵的谱半径的上界、下界,由此给出有向图的谱半径的界.     

碳纳米管的共价修饰

碳纳米管(carbon nanotubes, CNTs)的溶解性和分散性较差是目前制约其广泛应用及在一些有特殊要求的领域(如生物技术)应用的主要原因之一. 对CNTs进行共价修饰是改善其溶解性和分散性的有效方法之一. 目前CNTs的共价修饰主要通过两类反应来实现: 羧基的衍生反应和直接加成反应. 介绍了基于这两种反应的几种共价修饰方法, 比较了各种修饰方法的优缺点及其对CNTs的溶解性和分散性的改善效果.     

CO2 Capture by Hydroxylated Azine-Based Covalent Organic Frameworks

Covalent organic frameworks (COFs) RIO-13, RIO-12, RIO-11, and RIO-11m were investigated towards their CO₂ capture properties by thermogravimetric analysis at 1 atm and 40 °C. These microporous COFs bear in common the azine backbone composed of hydroxy-benzene moieties but differ in the relative number of hydroxyl groups present in each material. Thus, their sorption capacities were studied as a function of their textural and chemical properties. Their maximum CO₂ uptake values showed a strong correlation with an increasing specific surface area, but that property alone could not fully explain the CO₂ uptake data. Hence, the specific CO₂ uptake, combined with DFT calculations, indicated that the relative number of hydroxyl groups in the COF backbone acts as an adsorption threshold, as the hydroxyl groups were indeed identified as relevant adsorption sites in all the studied COFs. Additionally, the best performing COF was thoroughly investigated, experimentally and theoretically, for its CO₂ capture properties in a variety of CO₂ concentrations and temperatures, and showed excellent isothermal recyclability up to 3 cycles.     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

宽带放大器用碲基掺铒光纤结构参量的设计考虑

利用光波导理论及均匀展宽四能级模型,研究了宽带放大器用阶跃型折射率分布碲基掺铒光纤的结构参量—纤芯半径和相对折射率差的设计考虑.理论研究表明,在单模传输条件下,为获取最大信号增益,宜选择相对折射率差大的碲基掺铒光纤来构建光纤放大器.相对折射率差一定的情况下,在高泵浦功率、小信号输入或光纤长度短于各信道最佳增益长度时,选择纤芯半径大的碲基掺铒光纤可以得到大的信号增益;反之,宜选择纤芯半径小的碲基掺铒光纤.