基于阳离子型共轭聚合物和核酸适体的腺苷检测新方法

建立了一种基于阳离子型共轭聚合物和核酸适体的腺苷检测新方法. 荧光素修饰的短链DNA与腺苷的核酸适体部分互补, 形成双链DNA; 阳离子型共轭聚合物通过静电作用与双链DNA结合, 发生高效率的荧光共振能量转移(FRET). 加入腺苷后, 腺苷与核酸适体发生特异性结合, 导致双链DNA分解成单链, 使静电吸引力下降, 能量转移效率降低. 通过阳离子型共轭聚合物对单双链DNA的高效识别, 可快速简易地检测出腺苷.     

Amplified Fluorescence Turn‐On Assay for Mercury(II) Detection and Quantification based on Conjugated Polymer and Silica Nanoparticles

An amplified fluorescence turn‐on assay for mercury(II) detection and quantification was developed. This method makes use of specific thymine/mercury(II)/thymine coordination to capture Fl‐labeled DNA onto NP surface. Addition of a cationic conjugated polymer leads to an amplified Fl signal in solution. A sigmoidal Hg²⁺ working curve is obtained at fixed [NP] with a detection limit of 0.1 × 10⁻⁶ M . However, by reducing [Hg²⁺] and [NP] simultaneously, while maintaining [Hg²⁺]:[DNA duplex] = 3:1, a linear calibration curve is observed with a detection limit of 5 × 10⁻⁹ M . The CCP‐assisted mercury(II) assay shows potential applications in environmental mercury detection and for industrial process control.

     

SYNTHESIS OF POLYBINAPHTHYLS INCORPORATING CHIRAL (R)-1,1′-BI-2,2′-NAPHTHOL ENTITIES WITHp-DIVINYLBENZENE BY Pd-CATALYZED HECK REACTION

Polymer (Ⅰ) and polymer (Ⅱ) were obtained by the polymerization of (R)-6,6′-dibromo-2,2′-binaphtho-20-crown-6(M-1) and (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (M-2) with p-divinylbenzene under Pdcatalyzed Heck reaction. The UV, fluorescence and CD spectra of polymer (Ⅰ) and (Ⅱ) are similar due to the same linkers present in their polymer chain. Polymers (Ⅰ) and (Ⅱ) can emit strong blue fluorescence and are expected to have potential applications in polarized blue-light emitting sensors. The chiral conjugated polymers (Ⅰ) and (Ⅱ) exhibit a strong Cotton effect in their circular dichroism (CD) spectra, indicating a high rigidity of polymer backbone.     

基于阳离子荧光共轭聚合物和核酸适体探针的蛋白质检测新方法

以核酸适体为识别分子, 阳离子荧光共轭聚合物为报告分子, 建立了一种蛋白质检测新方法. 修饰有荧光熄灭基团的核酸适体探针通过静电作用与阳离子荧光共轭聚合物结合, 导致后者荧光熄灭. 当加入靶蛋白后, 核酸适体探针与其特异性结合, 荧光熄灭基团与阳离子荧光共轭聚合物远离, 聚合物荧光信号得以恢复. 实验结果表明, 荧光恢复程度与靶蛋白的浓度正相关. 采用该方法检测凝血酶的线性范围为17～40 nmol/L.     

Water-soluble phosphate-functionalized polyfluorene as fluorescence biosensors toward cytochrome c

An anionic water-soluble polyfluorene derivative, poly(9,9-bis(6′-phosphatehexyl)fluorene-alt-1,4-phenylene) sodium salt (PFHPNa), was synthesized by Suzuki coupling reaction in DMF/water. Polymer PFHPNa was well soluble in water with a strong blue fluorescence emission. Effect of the side chain length on fluorescence sensory properties was studied by comparing quenching efficiencies toward different quenchers of PFHPNa with a reported polymer poly(9,9-bis(3′-phosphatepropyl)fluorene-alt-1,4-phenylene) sodium salt (PFPPNa), which have different side chains in length. For small molecular quenchers (methylviologen, MV²⁺) and meso-5,10,15,20-tetrakis-(N-methyl-4-pyridyl)porphine (TMPyP4), polymer PFHPNa had lower sensitivity due to the much longer side chain length. The positively charged metalloprotein cytochrome c could quench fluorescence of conjugated polymers via energy transfer and electron transfer. Moreover, polymer PFHPNa showed higher fluorescence quenching toward large biomolecules than PFPPNa. The corresponding Stern-Volmer (K _sv) value of polymer PFHPNa was determined to be 2.1×10⁸ M⁻¹ for cytochrome c. It could be used as a sensitive and selective fluorescence sensor for protein cytochrome c. Supported by the National Natural Science Foundation of China (Grant Nos. 20574067 & 50633040), the Science Fund for Creative Research Groups (Grant No. 20621401), and the 973 Project (Grant No. 2002CB613402)     

Germafluorene conjugated copolymer——synthesis and applications in blue-light-emitting diodes and host materials

A germafluorene-fluorene copolymer was successfully obtained via Suzuki polymerization. The germanium containing copolymer has an efficient blue light emission under the ultraviolet irradiation and its single layer EL device showed the highest brightness of 2630 cd/m² at 7.8 V and the highest efficiency of 0.301 lm/W at 6.2 V. The copolymer can also serve as the host material for phosphorescent metal complexes with the maximum brightness of 15600 cd/m² and the quantum efficiency of 8.5%. The results are quite promising and promise that as its analogs of fluorene and silafluorene, germafluorene is an excellent building block for blue light-emitting polymers and host materials. Supported by the National Natural Science Foundation of China (Grant Nos. 60325412, 90406021, and 50428303) and the Scientific Research Foundation of Nanjing University of Posts and Telecommunications (NUPT) (Grant No. NY206073)     

Microwave and Ionic Liquids: Inverse Temperature Dependence of Viscosity in Aqueous Medium of Grafted Copolymers

We elaborated a route to the thermosensitive polyelectrolyte system composed of 1‐methyl‐3‐vinylimidazolium salt with β‐cyclodextrin complexed counterions and mono‐(meth)acrylic functionalized poly(N‐isopropylacrylamide) as grafted side chains via a three‐step synthetic procedure. The aqueous solution of the polyelectrolyte displays partially inverse thermoresponsive behavior; it exhibits enhancement of shear viscosity up to body temperature. Furthermore, based on classically prepared poly(NIPAAm) bearing terminal amino groups, corresponding (meth‐) acrylamide‐type of macromonomers were easily obtained under microwave conditions.

     

Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Low bandgap π‐conjugated copolymers based on fused thiophenes and benzothiadiazole: Synthesis and structure‐property relationship study

A series of low bandgap conjugated polymers consisting of benzothiadiazole alternating with dithienothiophene (DTT) or dithienopyrrole (DTP) unit with or without 3‐alkylthiophene bridge have been synthesized. Effect of the fused rings and 3‐alkylthiophene bridge on the thermal, optical, electrochemical, charge transport, and photovoltaic properties of these polymers have been investigated. These polymers show broad absorption extending from 300 to 1000 nm with optical bandgaps as low as 1.2 eV; the details of which can be varied either by incorporating 3‐alkylthiophene bridge or by replacing DTT with DTP. The LUMO levels (?2.9 to ?3.3 eV) are essentially unaffected by the specific choice of donor moiety, whereas the HOMO levels (?4.6 to ?5.6 eV) are more sensitive to the choice of donor. The DTT and DTP polymers with 3‐alkylthiophene bridge were found to exhibit hole mobilities of 8 × 10^?5 and 3 × 10^?2 cm² V^?1 s^?1, respectively, in top‐contact organic field‐effect transistors. Power conversion efficiencies in the range 0.17–0.43% were obtained under simulated AM 1.5, 100 mW cm^?2 irradiation for polymer solar cells using the DTT and DTP‐based polymers with 3‐alkylthiophene bridge as donor and fullerene derivatives as acceptor. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5498–5508, 2009