Advances in ion chromatography: speciation of μ 1−1 levels of metallo-cyanides using ion-interaction chromatography

Fe(CN)^4?₆, Cu(CN)^3?₄, Co(CN)^3?₆, Fe(CN)^3?₆, Ni(CN)^2?₄ and Cr(CN)^3?₆ are determined by ion-interaction chromatography using a C₁₈ column and methanol-tetrahydrofuran-10 mM phosphate buffer (pH 7.9) (25 + 1 + 74, v/v/v) containing 5 mM tetrabutylammonium hydroxide as mobile phase, with spectrophotometric detection at 214 nm. Detection limits are in the range 0.01–0.5 mg 1^?1. In an alternative approach, an automated on-line sample preconcentration technique is used wherein a 2-ml volume of sample containing metallo-cyanides is loaded onto a C₁₈ precolumn which has been equilibrated with the above mobile phase. The bound solutes are then eluted from the precolumn to a C₁₈ analytical column where they are separated using the same mobile phase as employed to equilibrate the precolumn. Detection limits are in the rate 0.08–1.58 μg 1^?1 and calibration graphs are linear up to 200 μg 1^?1. The preconcentration step is shown to give quantitative recoveries for all species except Fe(CN)^4?₆ and (CN)^3?₄. The iron(II) complex does not bind quantitatively to the precolumn, and extensive studies with the copper complex suggested that low recoveries were due to dissociation and ligand-exchange reactions occurring during the chromatographic separation process. Negative interference effects were observed for Cl^? and SO^2?₄ when present at a level of 250 mg 1^1?, and UV-absorbing anions such as Br^?, SCN^?, NO^?₂ and NO^?₃ caused positive interference when present at concentrations as low as 1 mg 1^?1. The negative interferences could be reduced by diluting the sample and the positive interferences could be eliminated by incorporating an additional step in the preconcentration process, in which UV-absorbing anions bound to the precolumn after sample loading were eluted selectively using an eluent consisting of 10 mM NaCl in phosphate buffer (pH 6.7).     

Ozone-based sulfur chemiluminescence detection: Its applicability to gas,supercritical fluid,and high performance liquid chromatography

The sensitive detection of sulfur-containing analytes is of interest in many industrial applications; selective detection is also desirable since these compounds are usually present at trace levels in difficult matrixes. The purpose of this article is to review the use of the Sievers® ozone-based sulfur chemiluminescence detector, and its coupling with gas chromatography, supercritical fluid chromatography, and high performance liquid chromatography. Detection limits, linearity, response factors, and selectivity are discussed for each of these techniques. Critical operational parameters for the SCD are also described. The use of other sulfur selective detectors for SFC and HPLC is also briefly summarized.     

The use of silicon in the preparation of apolar glass capillary columns

As an extention of previous reports, variables affecting the performance of columns modified by silicon deposition have been optimized. The aim of this work was to produce thermostable apolar glass capillary columns regardless of the glass type used and to maintain column performance under stressful conditions. The main parameters studied were the influence of glass type, leaching effects, and silicon layer thickness on column activity. Deactivation and stationary phase conditions were held constant. Both coated and uncoated columns were tested. The thickness of the silicon layer was found to be relatively unimportant. There was no difference whether soft glass or borosiiicate glass was used and leaching before silicon deposition did not influence column activity. Bare silicon surfaces showed considerable activity especially in respect to interactions with free acids and bases. There are indications that the surface consists of silicon oxide and other oxygenated forms of silicon rather than of the element. Treatment of the silicon layers with dilute hydrofluoric acid and the strict exclusion of traces of oxygen and water did not improve the situation. In spite of such specific interactions, silicon surfaces were easily deactivated by heat treatment with polysiloxanes. Silicon surfaces deactivated by baking with octamethyltetrasiloxane at 400°C are inert and temperature stable and show characteristics similar to persilylated surfaces.     

Non-aqueous,reversed-phase,high-performance,thin-layer chromatography and column liquid chromatography of metal complexes of porphine

Summary The chromatographic mobility of 21H, 23H-porphine and its Ni(II), Cu(II), Zn(II) and Pd(II) complexes were investigated by high-performance thin-layer chromatography on an octadecyl-bonded, silica gel plate with various polar organic solvents including alcohols, acetonitrile, dimethylsulfoxide and propylenecarbonate. The mobility generally decreases according to the central metal ion of the complex as follows: Zn(II)>(free porphine)>Ni(II)>Pd(II)>Cu(II). Methanol is a good choice of solvent for the separation of these metal porphine complexes. Successful separation of porphine and the four metal complexes is accomplished within 13 min on a LiChrosorb RP-18 column with methanol eluent.     

Study on interaction between drug and membrane by using liposome coated zirconia-magnesia chromatography

The interactions between drug molecules and membrane were studied using the new chromatography stationary phase of liposome coated zirconia–magnesia. log K_s(ZrO₂–MgO) on this new chromatography for some drugs, compared with that on liposome coated silica chromatography and other reported data, fair correlations were observed between them when excluding effect of special adsorption. log K_s(ZrO₂–MgO) values for barbitalum, diazepam, benzene, benzocaine and toluene correlated well with corresponding values on liposome coated silica chromatography (R = 0.99778, P < 0.001; R = 0.98229, P < 0.003; R = 0.9985, P < 0.0001; R = 0.99925, P < 0.0001, pH value of mobile phase at pH 7.4, 7.0, 6.4 and 5.4, respectively). They also correlated well with the literature data on immobilized artificial membrane chromatography (R = 0.99999, P < 0.004 at pH 7.4) and liposome chromatography (R = 0.99994, P < 0.008) for procaine, lidocaine and bupivacaine. Liposome coated zirconia–magnesia chromatography can thus be used for studying drug–membrane interaction and prediction of drug absorption as another liposome chromatography method.     

傅里叶变换红外光谱和气相色谱-质谱法快速检测鼠药

用傅里叶变换红外光谱(FT-IR)差谱技术和气相色谱．质谱(GC/MS)全扫描法及特征离子监测技术，建立了毒鼠强和氟乙酰胺的标准质谱图库。利用有机溶剂直接萃取与FT-IR和GC/MS的结合，建立了混合组分原形物中毒鼠强和氟乙酰胺的快速检测方法。对7份实际样品的鉴定获得满意的结果。建立的方法为侦破案件提供了快速、灵敏、准确、有效的分析手段。     

Separation ofN-carbamoyl aspartate andl-dihydroorotate from serum by high-performance liquid chromatography with fluorimetric detection

Summary A high-performance liquid chromatographic method, with 9-anthryldiazomethane as derivatizing agent, has been developed for the simultaneous determination ofN-carbamoyl aspartate andl-dihydroorotate in serum. Sample preparation for 1 mL serum was by simple liquid-liquid extraction and then derivatization. The compounds were separated on a Luna C18(2) column by use of a gradient prepared from acetonitrile and 10 mM sodium acetate buffer, pH 6.0, and fluorimetric detection was performed at excitation and emission wavelengths of 365 nm and 412 nm, respectively. The response was found to be linearly dependent on concentration between 0.8 and 60 μg mL⁻¹ forl-dihydrooratate and between 0.9 and 90 μg mL⁻¹ forN-carbamoyl aspartate; the mean recovery rates were 50 and 51%, respectively. The limits of detection and quantification were 0.33 μg mL⁻¹ and 0.6 μg mL⁻¹, respectively, forl-dihydroorotate and 0.4 μg mL⁻¹ and 0.7 μg mL⁻¹ forN-carbamoyl aspartate. This method can be used to assess accumulation ofN-carbamoyl aspartate andl-dihydroorotate in body fluids in situations where cellular pyrimidine de novo synthesis is impaired.     

Investigation of the separation of scandium and rare earth elements from red mud by use of reversed-phase HPLC

A chromatographic method has been developed for separation and determination of scandium (Sc) and rare earth elements (REEs) in samples from a red mud (RM)-utilization process. Reversed-phase high-performance liquid chromatography (RP-HPLC) with post-column derivatization using 4-(2-pyridylazo)-resorcinol (PAR) and UV–visible detection at 520 nm was tested using different gradient elution profiles and pH values to optimize separation and recovery, primarily for Sc but also for yttrium and the individual lanthanides, from iron present in the samples. The separation was performed in less than 20 min by use of a mobile phase gradient. The concentration of -hydroxyisobutyric acid (-HIBA), as eluent, was altered from 0.06 to 0.4 mol L^–1 (pH 3.7) and 0.01 mol L^–1 sodium salt n-octane sulfonic acid (OS) was used as modifier. Very low detection limits in the nanogram range and a good resolution for Sc and REEs except for Y/Dy were achieved. Before application of the method to the red mud samples and to the corresponding bauxites, Sc and REEs were leached from red mud with 0.6 mol L^–1 HNO₃ and mostly separated, as a group, from the main elements by ion exchange/selective elution (6 mol L^–1 HNO₃) in accordance with a pilot-plant process developed in this laboratory. After evaporation of the eluent to dryness the extracted elements were re-dissolved in the mobile phase. By use of this chromatographic method Sc, which is the most expensive of the elements investigated and occurs in economically interesting concentrations in red mud, could be separated not only from co-existing Fe but also from Y/Dy, Yb, Er, Ho, Gd, Eu, Sm, Nd, Pr, Ce and La. All the elements investigated were individually recovered. Their recoveries were found to be nearly quantitative.     

Interaction of Water and Methanol Molecules with the Surface of Carbonaceous Materials According to Gas Chromatographic Data

We have used gas chromatography to study the interaction of water and methanol molecules with active hydrophilic centers on the surface of thermally expanded graphite and graphitized thermal carbon black. We have determined the concentration of carboxyl and phenol hydroxyl groups on the surface of the sorbents and the heats of adsorption for adsorption of the studied substances on these groups. We have shown that water molecules are adsorbed as clusters on the hydrophilic centers of the studied sorbents at very low relative pressures, with n = 2 molecules in the cluster.     

Simultaneous Determination of Enalapril and Enalaprilat in Human Plasma by LC-MS: Application to a Bioequivalence Study

A rapid, simple and specific liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method has been developed and validated for the simultaneous determination of enalapril and its major active metabolite enalaprilat in human plasma. Benazepril hydrochloride was used as the internal standard. Plasma was deproteinized with acetone and centrifuged. The supernatant was transferred and evaporated to dryness and the residue dissolved in mobile phase. Samples were separated on a C18 column with a mobile phase of methanol–20 mM ammonium acetate (53:47, v/v) containing 0.15% trifluoracetic acid (v/v) with a pH of 3.0. Enalapril, enalaprilat and the internal standard were measured by electrospray positive selective ion monitoring mode. The method was validated over a linear range of 1.56–400 ng mL⁻¹ and the limits of quantification were 1.56 ng mL⁻¹ for both enalapril and enalaprilat using 0.1 mL plasma. Extraction efficiency was more than 84% and recoveries were in range of 93.65–101.17%. The intra-day relative standard deviations (RSD) were less than 8.16 and 7.05% and inter-day RSDs were within 8.42 and 5.72% for enalapril and enalaprilat, respectively. The storage stability of QC samples was investigated under various conditions. The method was successfully applied for the evaluation of the pharmacokinetics and bioequivalence of enalapril and enalaprilat in 20 healthy volunteers after an oral dose of 20 mg enalapril maleate.