Automated derivatization for on-line solid-phase extraction-gas chromatography; phenolic compounds

An automated system for derivaatization was coupled on-line with solid-phase extraction-gas-chromatography (SPE-GC). The system was optimized for the determination of phenol and chlorinated phenols in aqueous samples. The test analytes were acetylated with acetic anhydride; proper buffering of the sample was a critical factor. Next, the phenol acetates were enriched on a SPE cartridge and transferred to a GC; two appraoaches were studied. In the first approach, the derivatives were enriched on disposable C18 cartridges (ASPEC type) and desorbed with methylacetate. Aan aliquot of the final eluate was injected on-line the GC by means of a loop-type interface. In the second approach, trace enrichment was performed on 10 × 2 mm i.d. LC-type precolumn packed with polystyrenedivinylbenzene copolymer (PLRP-S) this precolumn was dried with a mitrogen purge and the phenol acetates were desorbed with ethyl acetate which was injectedon-line into the retention gap of the GC under partially concurrent solvent evaporation (PCSE) conditions. The Derivatization-SPE-GC system which was based on the loop-type interface has the advantage of simplicity and easy operation, the main drawback is the impossibility to determine phenol acetates which elute prior to trichlorophenol acetates. With the derivatization-SPE-GC approach using PCSE-based desorption, even the most volatile analyte of the test series, phenol acetate, can be determined successfully. The entire procedure, including the derivatization step, was fully automated and integrated in one set-up. The precision data for the integrated on-line derivatization-SP-FID system were fully satisfactory, with RSD values of 1–12 % at the 1 μg/1 level. When a sample volume of 2.2 ml was analyzed, The detection limits for the chlorinated phenol acetates were in the 0.1–0.3 μg/1 range.     

The variation of carrier gas viscosities with temperature

After describing simplified equations exspressing the temparature dependency of the viscosity of carrier gases (helium, nitrogen and hydrogen ) relative to a base value, absolute relationships based on the kinetic theory of gases are discussed. Comparative data obtained using various calculation methods are given and are compared to measured values. Based on the kinetic relationshipsm, of viscosity. Finally, the influence of pressure on the viscosity is also briefly discussed. As a supplement, Viscosity data are tabulated for the three gases in the range of 0°C to 400°C in increments of 2 K, calculated using the kinetic relationships.     

Practical syntheses of [1,3,5]‐triazine dendritic molecules on solid supports

A practical and divergent synthesis of supported [1,3,5]‐triazine dendritic molecules on Wang resin, PEGA resin, SynPhase? Lanterns, and silica gel is described. The alkylamine linkers used allow derivatization with functionality for both synthetic (e.g., supported reagent and scavenger activity) and chemical biology applications. The use of supported intermediates allows differentiation of symmetric linkers without the need for protecting group chemistry. The synthetic route uses inexpensive, readily available starting materials in a straightforward and scaleable strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2248–2259, 2006     

Densitometric Determination of Hecogenin from Agave americana Leaf Using HPTLC

We report a simple TLC densitometric method for the quantification of hecogenin from the leaves of Agave americana using HPTLC. The method was validated for precision, repeatability and accuracy. The method was found to be precise with RSD of 0.78 (intraday) and 0.82 (interday) for different concentrations of hecogenin. Instrumental precision was 0.42 (% RSD) for hecogenin. The content of hecogenin in different samples was estimated by the proposed method and was found to be in the range of 0.05−0.14% w/w in the samples analysed. Accuracy of the method was checked by conducting recovery study at three different levels for hecogenin and the average percentage recovery was 98.98%, 101.92% and 103.33%, respectively. The TLC densitometric method developed for the quantification of hecogenin was found to be simple, precise, specific, sensitive, accurate and can be used in routine quality control. Revised: 7 and 25 April 2006     

胶束液相色谱／安培电化学检测尿样中的扑热息痛及4－氨基苯酚

用胶束液相色谱／安培检测器检测尿样中的扑热息痛及其主要水解产物４－氨基苯酚。采用１４．５μｍ的碳纤维电极作为工作电极，以高于临界胶束浓度的阴离子表面活性剂十二烷基磺酸钠（ＳＤＳ）作为液相色谱的流动相，尿样直接进样分析，扑热息痛和４－氨基苯酚的检测限分别为０．１３ｎｍｏｌ／Ｌ及０．７３ｎｍｏｌ／Ｌ（Ｓ／Ｎ＝２）。     

An amperometric detector with a tubular electrode deposited on the capillary for capillary liquid chromatography

A procedure is described for the preparation of a tubular electrode by chemical deposition of platinum at the end of a fused-silica capillary. The properties of the electrode were tested under liquid chromatographic conditions, demonstrating that both the static and the dynamic behaviour of the detection system satisfy the requirements of capillary chromatographic separations and compare well with a wall-jet amperometric system and with UV photometric detection. The detection system described is easy to prepare and does not require any time-consuming positioning of the electrode system as it is integrated into the separation part of the apparatus.     

Identification of chlorinated sulfur compounds in pulp mill effluents by GC-MS and GC-AED

Summary Three chlorinated dimethyl sulfones and five chlorinated thiophenes have been identified in the alkaline extraction liquor from a bleach plant by gas chromatography with atomic emission detection (GC-AED) and with mass spectrometry (GC-MS). The information on elemental content obtained by GC-AED enabled a rapid screening of the sulfur compounds and provided important structural information complementary to the mass spectral data. Quantitation was accomplished by GC-AED based on universal calibration.