On the flow of thermal defects from the bulk to surfaces

This paper treats flow of defects between bulk and surface sites, as a crystal passes towards equilibrium, for some practical cases. These include the realistic but quite elaborate example in which vacancy flow from the bulk is coupled to surface step edges, acting as sinks, by reaction with adatoms that are believed to dominate transport on metal surfaces. It is shown how surface processes modify the defect flow from the bulk only at short times. Lacking accurate parameters (such as concentrations) for surface defects, a crude modeling of the theoretical results is offered in order to explore likely generic behavior. The model employs a recently described approximate universality of behavior, scaled to the melting temperature, relevant mainly to fcc (1 1 1) surfaces. Under a range of conditions it is the reaction of advacancies with adatoms that provides the important channel for bulk vacancy flow. Adatom flow onto the terraces from surface step edge sinks is the bottleneck to flow above a crossover temperature (depending on step spacing) and equilibrium recombination is the bottleneck below the crossover.     

Field electron emission images of multi-walled carbon nanotubes

Field electron emission microscope images from multi-walled carbon nanotubes can typically be characterized by the presence of five pentagons surrounding a sixth central pentagon. The observations of bright line centered interference patterns between adjacent pentagons in the field electron emission microscope images of multi-walled carbon nanotubes have been reported in the literature. We have observed a shift from bright to dark line centered interference patterns and associated this with the presence of surface adsorption. In order to identify the origin of the contaminant, multi-walled carbon nanotubes were dosed with H₂, H₂O, CO and O₂ and then imaged in the field electron emission microscope. Only the samples exposed to O₂ showed a shift from a bright line centered pattern between adjacent pentagons of a clean surface to a dark line centered pattern when one pentagon was contaminated or a bright line centered pattern when both adjacent pentagons become contaminated. The results of the experimental studies and the modeling of the changes in the field emission pattern as phase shifts in the wave function of the tunneling electrons due to modifications in the surface work function are presented.     

石墨毡载纳米δ-MnO2高性能除铵净水材料研究

首先制备了α-MnO₂纳米花簇、β-MnO₂纳米针和δ-MnO₂微米颗粒三种不同晶型的MnO₂粉末材料，对其结构、形貌及吸附除铵能力进行了表征和测试.结果表明，层间距（7.2Å）大于NH₄⁺直径（2.96Å）和水合NH₄⁺直径（6.62Å）的δ-MnO₂相比其他两种晶型的MnO₂有更高的NH₄⁺吸附量；接着研究采用KMnO₄原位氧化还原法在石墨毡（GF）上直接生长超薄δ-MnO₂纳米片（MnO₂NPs）阵列构筑了石墨毡载纳米MnO₂（MnO₂NPs/GF）多级结构材料，制备简单，无须成型造粒就可直接用作除铵净水材料，研究结果表明，MnO₂NPs/GF不仅具有较高的吸附量（15 mg·g^－1）与良好的选择性，同时还展现了优异的快速吸附和稳定的循环使用性能.MnO₂NPs/GF对水中NH₄⁺的吸附符合准二级动力学模型，其吸附等温线符合Langmuir吸附等温式，是吸附-离子交换法除铵的理想材料.     

The Aza‐Morita–Baylis–Hillman Reaction: A Mechanistic and Kinetic Study

The aza‐Morita‐Baylis–Hillman (aza‐MBH) reaction has been studied in a variety of solvents, a selection of imine substrates and with various combinations of PPh₃ and para‐nitrophenol as the catalyst system. The measured kinetic data indicates that the effects of solvent and protic co‐catalyst are strongly interdependent. These results are most easily reconciled with a mechanistic model involving the reversible protonation of zwitterionic intermediates in the catalytic cycle, which is also supported by ³¹P NMR spectroscopy and quantum chemical studies.     

Chemical kinetics at high pressure

Abstract

Numerous studies have demonstrated the importance to include pressure as a kinetic parameter in the elucidation of inorganic reaction mechanisms. These studies have specially led to a better understanding and a systematic classification of solvent exchange and ligand substitution reactions of octahedral complexes of transition metal elements. The mechanistic picture for substution reactions on square planar complexes is well established and involves a concurrent bimolecular attack by solvent and the nucleophile on the substrate with a considerable discrimination among different entering groups. The search for factor promoting the conversion of the normal associative mode of activation into a dissociative process has then attracted much attention. Two attempts to induce dissociation, as studied by high-pressure NMR, are presented: one is to prevent the formation by means of sterically hindered ligands, the other one is to promote bond weakening at the leaving group.     

Improved Self-Feedback Gain in the Context Layer of a Modified Elman Neural Network

The use of a range of values for the self-feedback gains in the context layer of a modified Elman neural network is shown to reduce RMS error when modelling a non-linear dynamic system.     

植物样品中痕量碘的测定

研究了植物样品中痕量碘的测定条件.样品用艾斯卡熔剂于550 ℃灰化分解,以乙酸-乙酸钠缓冲体系,控制适当的酸度,利用4,4′-四甲基二胺基甲烷(简称四碱)-氯胺T体系进行催化比色测定,通过对实验温度的严格控制,以及增加样量,较大地改善了催化光度法测定痕量碘的稳定性和灵敏度.结果表明,在选定实验条件下,测定精密度(n=1...     

Synthesis and crystallization behavior study of syndiotactic polystyrene‐g‐isotactic polypropylene (sPS‐g‐iPP) graft copolymers

Based on coordination polymerization mechanism only, novel stereoregular graft copolymers with syndiotactic polystyrene main chain and isotactic polypropylene side chain (sPS‐g‐iPP) were synthesized via two steps of catalytic reactions. First, a chain transfer reaction was initiated by a chain transfer complex composed of a styrene derivative, 1,2‐bis(4‐vinylphenyl)ethane, and hydrogen in propylene polymerization mediated by rac‐Me₂Si[2‐Me‐4‐Ph(Ind)]₂ZrCl₂ and MAO, which gave iPP macromonomer bearing a terminal styryl group (iPP‐t‐St). Then the iPP‐t‐St macromonomers of varied molecular mass were engaged in syndiospecific styrene polymerization over a typical mono‐titanocene catalyst (CpTiCl₃/MAO) under different conditions to produce sPS‐g‐iPP graft copolymers of varied structure. With an effective purification process, well‐defined sPS‐g‐iPP copolymers were obtained, which were then subjected to differential scanning calorimetry (DSC) and polarized optical micrograph (POM) studies. The graft copolymers were generally found with dual melting and crystallization temperatures, which were ascribable respectively to the sPS backbone and iPP graft. However, it was revealed that the two segments displayed largely different melting and crystallization behaviors than sPS homopolymer and the precursory iPP‐t‐St macromonomer. Consequently, the graft copolymer exhibited much distinctive crystalline morphologies when compared with their individual components. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Copolymerization of norbornene with methoxycarbonylnorbornene catalyzed by Ni{CF3C(O)CHC[N(naphthyl)]CH3}2/B(C6F5)3 catalytic system and good processability for Dry/Wet phase inversion and electrospinning technique

Copolymerization of norbornene (NB) with methoxycarbonylnorbornene (NB‐COOCH₃) was carried out with catalytic system of Ni{CF₃C(O)CHC[N(naphthyl)]CH₃}₂ and B(C₆F₅)₃ in toluene. The catalytic system exhibited higher activity 2.69 × 10⁵ (gpolymer/mol Ni h) for copolymerization of norbornene and methoxycarbonylnorbornene. The influence results of the comonomer feed content on the polymerization showed that the NB‐COOCH₃ has a very high insertion ratio in all copolymers, and the NB‐COOCH₃ content in copolymers can be controlled to be 7.9–77.6 mol % at content of 10–90 mol % of the NB‐COOCH₃ in the monomer feeds ratios. The reactivity ratios, r_NB‐COOCH3 = 0.578 and r_NB = 0.859, were determined by the Kelen–TÜdÕs method. Copolymers were processed by solution casting method, dry/wet phase inversion technique, and electrospinning. The films prepared by solution casting method showed good transparency in the visible region. The membranes processed by dry/wet phase inversion technique were microporous structures. The fibers diameters fabricated by electrospinning were about 3 μm. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Poly(ascorbyl acrylate)s: Synthesis and evaluation of their redox polymerization ability in the presence of hydrogen peroxide

In this work, a strategy for chemical synthesis of ascorbic acid functionalized polyacrylates (PAAA) was accomplished in a two‐step process, first a reversible addition fragmentation chain‐transfer (RAFT) polymerization on a benzyl‐protected ascorbyl acrylate monomer, followed by a deprotection (debenzylation) reaction. The polymers were characterized by ¹H NMR, ¹³C NMR and gel permeation chromatograph. The polymerization ability of redox pair including PAAA and H₂O₂ were conducted through the measurement of 2‐hydroxyethyl acrylate (HEA) conversion against time via real‐time FT‐NIR. It was found that PAAA in the presence of H₂O₂, independent on itself chain length, exhibited much faster polymerization than small molecule ascorbic acid (smAA) as reductant at identical condition. Interestingly, when the concentration of ascorbate repeating unit was over some critical value, the polymerization kinetics of HEA could be tunable by simply adjusting the initial molar ratio of reductant to oxidant and environmental pH. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011