Direct synthesis of linear low‐density polyethylene of ethylene/1‐hexene from ethylene with a tandem catalytic system in a single reactor

Tandem catalysis offers a promising synthetic route to the production of linear low‐density polyethylene. This article reports the use of homogeneous tandem catalytic systems for the synthesis of ethylene/1‐hexene copolymers from ethylene stock as the sole monomer. The reported catalytic systems employ the tandem action between an ethylene trimerization catalyst, (η⁵‐C₅H₄CMe₂C₆H₅)TiCl₃ ( 1 )/modified methylaluminoxane (MMAO), and a copolymerization metallocene catalyst, [(η⁵‐C₅Me₄)SiMe₂(^tBuN)]TiCl₂ ( 2 )/MMAO or rac‐Me₂Si(2‐MeBenz[e]Ind)₂ZrCl₂ ( 3 )/MMAO. During the reaction, 1 /MMAO in situ generates 1‐hexene with high activity and high selectivity, and simultaneously 2 /MMAO or 3 /MMAO copolymerizes ethylene with the produced 1‐hexene to generate butyl‐branched polyethylene. We have demonstrated that, by the simple manipulation of the catalyst molar ratio and polymerization conditions, a series of branched polyethylenes with melting temperatures of 60–128 °C, crystallinities of 5.4–53%, and hexene percentages of 0.3–14.2 can be efficiently produced. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4327–4336, 2004     

Convenient Preparation of Di- and Tri-Ethynylbenzenes by Cleavage of 2-Hydroxy-2-methylbut-3-yn-4-ylbenzenes with Water Miscible Reagents

2-Hydroxy-2-methylbut-3-yn-4-ylbenzenes, readily available from bromobenzenes, are efficiently cleaved by the water-miscible reagents sodium 2-propoxide in 2-propanol, or potassium hydroxide in dioxan, which facilitates isolation of volatile ethynylbenzenes.     

Diffusion of acetophenone in peroxide cross-linked cable compounds

The diffusion of acetophenone in peroxide cross-linked low-density polyethylene (LDPE) medium-voltage cable was investigated with Fourier transform infrared (FTIR) microscopy. The influence of storage under normal climate and for up to 2 years on the acetophenone profile are discussed. The diffusion rate and the coefficient of diffusion of acetophenone in cross-linked LDPE were determined. It could be shown that the coefficient of diffusion is independent of the morphology of the medium-voltage cables investigated.     

Thermosensitive behavior of poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) double hydrophilic block copolymers

The poly(ethylene glycol)/poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PEG/PDMAEMA) double hydrophilic block copolymers were synthesized by atom transfer radical polymerization using mPEG‐Br or Br‐PEG‐Br as macroinitiators. The narrow molecular weight distribution of PEG/PDMAEMA block copolymers was identified by gel permeation chromatography results. The thermosensitivity of PEG/PDMAEMA block copolymers in aqueous solution was revealed to depend significantly on pH, ionic strength, chain structure, and concentration of the block copolymers. By optimizing these factors, the cloud point temperature of PEG/PDMAEMA block copolymers can be limited within body temperature range (30–37 °C), which suggests that PEG/PDMAEMA block copolymers could be a good candidate for drug delivery systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 503–508, 2010     

聚醚本体末端点击化学交联反应动力学研究

采用原位红外光谱法研究了PTPEG/GAP反应动力学.利用PTPEG/GAP反应体系在2100 cm-1和1086 cm-1吸光度比值与反应时间的关系得到了PTPEG/GAP本体末端点击化学交联反应的动力学曲线.曲线拟合表明,PTPEG/GAP本体末端交联反应过程分为明显的两个阶段;30℃时第一阶段反应动力学结束于535 min,40℃时为305 min,50℃时为295 min,60℃时为115 min.黏度测试表明,PTPEG/GAP反应体系黏度(η)随时间(t)变化曲线呈"L"型;30℃时η-t曲线拐点出现于540 min,40℃时为320 min,50℃时为305min,60℃时为118 min,拐点前后分别对应PTPEG/GAP凝胶前、凝胶后状态;且η-t曲线拐点时间与PTPEG/GAP第一阶段反应动力学结束时间相吻合.Arrhenius公式拟合表明,凝胶前,PTPEG/GAP末端点击化学交联反应表观活化能Ea1为(45.57±2.77)k J/mol;凝胶后,表观活化能Ea2为(59.50±4.01)k J/mol.     

Synthesis and morphology of polyethylene chains grafted onto the surface of crosslinked polystyrene microspheres

The bifunctional comonomer 4‐(3‐butenyl) styrene was used to synthesize crosslinked polystyrene microspheres (c‐PS) with pendant butenyl groups on their surface via suspension copolymerization. Polyethylene chains were grafted onto the surface of c‐PS microspheres (PS‐g‐PE) via ethylene copolymerizing with the pendant butenyl group on the surface of the c‐PS microspheres under the catalysis of metallocene catalyst. The composition and morphology of the PS‐g‐PE microspheres were characterized by means of Fourier transform infrared spectroscopy, Fourier transform Raman spectroscopy, X‐ray photoelectron spectroscopy, and field‐emission scanning electron microscopy. It is possible to control the content of PE grafted onto the surface of c‐PS microspheres by varying the polymerization time or the initial quantity of pendant butenyl group on the surface of c‐PS microspheres. Investigation on the morphology and crystallization behavior of grafted PE chains showed that different surface patterns could be formed under various crystallization conditions. Moreover, the crystallization temperature of PE chains grafted on the surface of c‐PS microspheres was 6 °C higher than that of pure PE. The c‐PS microspheres decorated by PE chains had a better compatibility with PE matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4477–4486, 2007     

Thermoelectric behavior (PTC) of carbon black‐containing TPX/UHMWPE and TPX/XL‐UHMWPE blends

This article describes the structure and electrical performance of positive‐temperature‐coefficient/negative‐temperature‐coefficient (PTC/NTC) effects of the following three‐component blends: poly(4‐methyl pentene‐1)/ultra‐high molecular weight polyethylene/carbon black (TPX/UHMWPE/CB), poly(4‐methyl pentene‐1)/crosslinked‐ultra‐high molecular weight polyethylene/carbon black (TPX/XL‐UHMWPE/CB), and γ‐irradiated, compression‐molded plaques of these blends. CB particles are preferentially attracted to the UHMWPE and XL‐UHMWPE particles, which constitute the dispersed phase within the TPX matrix, but practically cannot or can only very slightly penetrate them because of their extremely high viscosity. Thus, CB particles initially form conductive networks on the UHMWPE phase; this is followed by distribution in the TPX matrix, electrically connecting the CB‐covered UHMWPE particles. This unusual CB distribution results in a reduced percolation threshold of all blends. A double‐PTC effect is exhibited by the XL‐UHMWPE‐containing samples. Irradiation of compression‐molded plaques improves their thermoelectric behavior by amplifying the PTC effect and reducing the NTC effect. A schematic model of the double‐PTC effect is suggested, describing the morphological changes of 70TPX/30XL‐UHMWPE/CB blends at different stages of heating with respect to their thermoelectric behavior. Irradiation of TPX/UHMWPE/CB plaques converts these systems into high‐intensity PTC materials free of the NTC effect. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1415–1428, 2001     

Novel synthesis of biodegradable star poly(ethylene glycol)‐block‐poly(lactide) copolymers

Biodegradable star‐shaped poly(ethylene glycol)‐block‐poly(lactide) copolymers were synthesized by ring‐opening polymerization of lactide, using star poly(ethylene glycol) as an initiator and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature. Two series of three‐ and four‐armed PEG‐PLA copolymers were synthesized and characterized by gel permeation chromatography (GPC) as well as ¹H and ¹³C NMR spectroscopy. The polymerization under the used conditions is very fast, yielding copolymers of controlled molecular weight and tailored molecular architecture. The chemical structure of the copolymers investigated by ¹H and ¹³C NMR indicates the formation of block copolymers. The monomodal profile of molecular weight distribution by GPC provided further evidence of controlled and defined star‐shaped copolymers as well as the absence of cyclic oligomeric species. The effects of copolymer composition and lactide stereochemistry on the physical properties were investigated by GPC and differential scanning calorimetry. For the same PLA chain length, the materials obtained in the case of linear copolymers are more viscous, whereas in the case of star copolymer, solid materials are obtained with reduction in their T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3966–3974, 2007     

Dynamic mechanical behavior of oriented semicrystalline polyethylene terephthalate

The dynamic mechanical behavior of molecularly oriented semicrystalline polyethylene terephthalate (PET) induced via the equal‐channel angular extrusion (ECAE) process was investigated. Dynamic mechanical analyses in both torsional mode and bending mode were utilized. The results indicate that the ECAE‐oriented PET has a higher dynamic storage modulus above the glass‐transition temperature than that of the reference (control sample). The combined effect of molecular orientation and crystallinity is responsible for the changes in the primary and secondary relaxations of PET. Further analyses show that the shifting and broadening of the primary and secondary peak positions in oriented PET are mainly due to the amorphous‐phase orientation because the crystallinity of PET decreases upon the ECAE processing. A good correlation was found between the structural anisotropy and the dynamic mechanical properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1394–1403, 2001