Simultaneous measurement of methyl tert‐butyl ether and tert‐butyl alcohol in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry

The abundant production of methyl tert‐butyl ether (MTBE) and its widespread use have led to an increase in the potential for human exposure. This work described a simple, fast, sensitive, reliable and low‐cost method for the simultaneous measurement of MTBE and its metabolite, tert‐butyl alcohol (TBA) in human serum by headspace solid‐phase microextraction gas chromatography–mass spectrometry. Extraction conditions were optimized and 40 °C, 10 min, 250 rpm and 0.3 g NaCl for a 1 mL sample were the optimal conditions. This method showed good analytical performance in terms of sensitivity with limits of detection in serum (1 mL) of 0.03 µg/L for MTBE and 0.05 µg/L for TBA, accuracy (mean recovery values) from 75.8% to 85.8%, precision (relative standard deviations) <10% and sample stability (biodegradation) <10% after 28 days. A verification experiment proved the reproducibility and stability of this method as well. Finally the method was used to detect 212 specimens, and the internal dose levels for MTBE in human serum were presented in China. Copyright © 2015 John Wiley & Sons, Ltd.     

Selective oxidation of benzylic,allylic and propargylic alcohols using dirhodium(II) tetraamidinate as catalyst and aqueous tert‐butyl hydroperoxide as oxidant

We show that the dirhodium(II) tetraamidinate complex Rh₂(Msip)₄ efficiently catalyzes the oxidation of activated secondary alcohols at only 0.1 mol% loading. In this approach, we oxidized various benzylic, allylic and propargylic alcohols to the corresponding carbonyl compounds under mild aqueous conditions using the inexpensive oxidant T‐HYDRO® (70 wt% aqueous tert‐butyl hydroperoxide). Copyright © 2015 John Wiley & Sons, Ltd.     

Investigation of Catalytic Chain Transfer Copolymerization of Methacrylates

Batch experiments were carried out to investigate the kinetics of catalytic chain transfer copolymerization of methyl methacrylate and n‐butyl methacrylate. The Predici® model developed to represent the system describes the numerous experimental data measured at high concentrations of Co(II ) catalyst, taking into account the chain‐length dependencies of termination, propagation and catalytic chain transfer. The constants for catalytic chain transfer are determined as 2.3 × 10⁴ for both methyl methacrylate and n‐butyl methacrylate from fitting the experimental data. Two inhibition mechanisms are shown to describe the decrease of the polymerization rate in the presence of catalyst equally well, with an unknown impurity dissolved in initiator introduced to explain experimental profiles measured at high initiator concentrations.

     

Insights into the Reinforcement of Butyl Rubber by Carbon Black and Silica with the Aid of Their Dynamic Properties

Carbon black (N234) and silica (Vulksail N) with a silane coupling agent Si-69 were chosen as reinforcing fillers in butyl rubber (IIR). The rheological behavior of the IIR compounds and the dynamic mechanical properties of IIR vulcanizates were investigated with a rubber processing analyzer and dynamic mechanical analysis (DMA) to examine the filler dispersion in the rubber matrix and the interaction between filler and matrix. The data indicated that the N234 filled IIR compounds had more filler networks than those filled with silica. Filler networks first appeared at 30 phr N234 and 45 phr silica with silane coupling agent Si-69. The interaction between N234 and IIR was far stronger than that between silica and IIR. However, the silica Vulksail N filled IIR had better wet-grip and lower rolling resistance compared to the carbon black-filled IIR should IIR be chosen as a substitute of styrene-butadiene rubber (SBR) in tire tread. The reinforcing factor, R, R (related to the difference in tan d peak height at T_g for the filled and nonfilled rubbers), also demonstrated that the N234-IIR interaction was stronger than for the silica. IIR with 30 phr N234 exhibited the largest tensile strength, 20.1 MPa, for those vulcanizates examined. The tensile and tear strengths of N234 filled IIR were higher than those of IIR with similar amounts of silica. Thus, it was concluded that N234 is a more active reinforcing filler in IIR than silica (Vulksail N) even with a silane coupling agent (Si-69).     

Anilinolysis of O‐butyl phenyl phosphonochloridothioate in acetonitrile: Synthesis,characterization, kinetic study,and reaction mechanism

This paper describes a simple optimized method for the synthesis of O‐butyl phenyl phosphonochloridothioate ( 4 ) under mild conditions. The target compounds were characterized by ¹H‐nuclear magnetic resonance (NMR), ¹³C‐NMR, and ³¹P‐NMR spectroscopy, as well as mass spectroscopy. The apparent structure of 4 was confirmed by optimization using the B3LYP/6‐311 + G(d,p) level in the Gaussian 09 program in acetonitrile. The nucleophilic substitution reactions of 4 with X‐anilines (XC₆H₄NH₂) and deuterated X‐anilines (XC₆H₄ND₂) were investigated kinetically in acetonitrile at 55.0°C. The free energy relationship with X in the anilines looked biphasic concave upwards with a break region between X = H and X = 3‐MeO, giving large negative ρ_X and small positive β_X values. The deuterium kinetic isotope effects were secondary inverse (k_H/k_D < 1: 0.789‐0.995) and the magnitudes, (k_H/k_D), increased when the nucleophiles were changed from weakly basic to strongly basic anilines. A concerted S_N2 mechanism is proposed on the basis of the selectivity parameters and the variation trend of the deuterium kinetic isotope effects with X.     

L-AlaC4NTf2手性离子液体作为新型气相色谱固定相的性能研究

合成了一种手性离子液体L-丙氨酸叔丁酯双三氟甲烷磺酰亚胺(L-AlaC4NTf2), 将其作为新型气相色谱固定相, 并与OV-1701按不同比例混合, 考察了它们的色谱性能. 研究结果表明, 该离子液体作为手性固定相的热稳定性高于175 ℃; 平均McReynolds常数为665; 在容量因子为1.02时, 理论塔板数可达每米1095块; 其对烷烃、醇类、酮类、芳香族化合物、位置异构体以及一些手性化合物具有良好的分离效果.     

Applications of polymethacrylate-based monoliths in high-performance liquid chromatography

Monolithic columns were introduced in the early 1990s and have become increasingly popular as efficient stationary phases for most of the important chromatographic separation modes. Monoliths are functionally distinct from porous particle-based media in their reliance on convective mass transport. This makes resolution and capacity independent of flow rate. Monoliths also lack a void volume. This eliminates eddy dispersion and permits high-resolution separations with extremely short flow paths. The analytical value of these features is the subject of recent reviews. Nowadays, among other types of rigid macroporous monoliths, the polymethacrylate-based materials are the largest and most examined class of these sorbents. In this review, the applications of polymethacrylate-based monolithic columns are summarized for the separation, purification and analysis of low and high molecular mass compounds in the different HPLC formats, including micro- and large-scale HPLC modes.     

A rapid and sensitive liquid chromatography/positive ion tandem mass spectrometry method for the determination of cimetropium in human plasma by liquid-liquid extraction

We have developed and validated a simple detection system with high-performance liquid chromatography (HPLC) with positive ion electrospray ionization tandem mass spectrometry (ESI-MS/MS) for determining cimetropium levels in human plasma using scopolamine butyl bromide as an internal standard (I.S.). The acquisition was performed in the multiple reaction monitoring (MRM) mode, by monitoring the transitions: m/z 357.9 > 103.1 for cimetropium and m/z 359.9 > 103.1 for butyl-scopolamine. The method involves a simple single-step liquid-liquid extraction with dichloromethane. The analyte was chromatographed on an YMC C18 reversed-phase chromatographic column by isocratic elution with 10 mM ammonium formate buffer-methanol (19:81, v/v; adjusted to pH 4.0 with formic acid). The results were linear over the studied range (0.2-100 ng ml(-1)), with r2 = 1.0000, and the total analysis time for each run was 2 min. Intra- and interassay precisions were 0.70-8.54% and 1.08-4.85%, respectively, and intra- and interassay accuracies were 97.56-108.23% and 97.48-103.91%, respectively. The lower limit of quantification (LLOQ) was 0.2 ng ml(-1). At this concentration, mean intra- and interassay precisions were 8.54% and 4.85%, respectively, and mean intra- and interassay accuracies were 97.56% and 98.91%, respectively. The mean recovery ranged from 62.71 +/- 4.06 to 64.23 +/- 2.32%. Cimetropium was found to be stable in plasma samples under typical storage and processing conditions. The devised assay was successfully applied to a pharmacokinetic study of cimetropium bromide administered as a single oral dose (150 mg) to healthy volunteers.     

Rapid separation and determination of aconitine alkaloids in traditional Chinese herbs by capillary electrophoresis using 1-butyl-3-methylimidazoium-based ionic liquid as running electrolyte

A novel and very simple capillary electrophoretic method for analyzing aconitine components in Aconitum plants was developed using 1-butyl-3-methylimidazoium tetrafluoroborate (1B-3MI-TFB)-based ionic liquid as running electrolyte solution for the first time. The optimum conditions were 35 mM 1B-3MI-TFB solution (pH 8.50) and 15 kV applied voltage. The detection was performed at 254 nm. Aconitine, meaconitine and hypaconitine in Aconitum plants were separated and identified within 5 min. The recoveries were 91.0-103.0% for hypaconitine, 92.8-96.2% for aconitine and 96.0-106.6% for mesaconitine, respectively. Compared with other methods, the analytical time was decreased 4-8-fold and the effect of Joule heating was weaker because the current was smaller.