外偶极电场作用下H_2O,D_2O和T_2O的可逆分解电压

采用密度泛函B3P86方法和6-311++G(3df,3pf)基组,计算了在-0.05～0.05a.u.外偶极电场作用下,H2O,D2O,T2O,H2,D2,T2,O2的电子能量、核运动能量和熵值,在此基础上通过计算H2O(g)→H2(g)+O2(g)、D2O(g)→D2(g)+O2(g)、T2O(g)→T2(g)+O2(g)的焓变ΔH、熵变ΔS、Gibbs函数变化ΔG,最后得到了H2O,D2O,T2O的可逆分解电压Er.计算结果表明,外偶极电场存在时,H2O,D2O,T2O的Gibbs自由能变ΔG和可逆分解电压Er都有明显的变化,当外偶极电场正方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性增加;当外偶极电场负方向增加时,其Gibbs自由能变ΔG和可逆分解电压Er均趋于线性减小;在相同外偶极电场作用下,Gibbs自由能变ΔG和可逆分解电压Er随H2O,D2O,T2O依次增加.     

激光诱导击穿光谱法对钢中夹杂物类型的表征

激光诱导击穿光谱( LIBS)不仅可以对材料整体成分进行分析,还可进行微区及成分分布分析。本实验采用激光诱导击穿光谱对两牌号钢铁样品进行扫描分析,尝试对34CrNiMo6钢中的MnS夹杂物和重轨钢中的Si-Al-Ca-Mg复合夹杂物进行表征。结果表明,34CrNiMo6钢中元素信号的二维强度分布及元素通道合成后,个别位置Mn及S两元素的信号强度同时异常高,可确定试样中存在较多MnS夹杂物;重轨钢中元素的二维强度分布及元素通道合成后,个别位置Si、Ca、Mg及Al元素的信号同时异常高,可确定试样中存在Si-Al-Ca-Mg复合夹杂物。采用扫描电子显微镜/能谱法( SEM/EDS)对上述样品中夹杂物的对比分析结果表明,两种方法对夹杂物类型的判定结果一致。     

微生物阳极燃料电池极性反转现象研究

本文在构建出微生物阳极燃料电池系统的基础上,研究了微生物燃料电池极性反转现象. 实验表明,由活性污泥混合菌源接种的微生物阳极在电极表面形成电化学生物膜,但平行构建的微生物阳极燃料电池系统在内阻、输出电压和放电时长等方面存在着不同程度差异. 在串联微生物燃料电池组中,放电操作会导致性能较差的微生物单电池首先出现极性反转. 电极电势测量表明,较高的放电电流使微生物阳极电势迅速正移,导致电池系统出现极性反转. 在室温范围内,温度升高可使MFC承受较高的放电电流,不易发生极化. 燃料物质缺乏时,MFC易发生极性反转,但过高的电流仍能使燃料物质充分的MFC出现极性反转. MFC极性反转会对微生物阳极性能造成影响. 极性反转时间较短(<5 min),对微生物阳极影响不大,但延长极性反转时间,会导致微生物阳极性能下降.     

An Ultra‐Long‐Life Lithium‐Rich Li1.2Mn0.6Ni0.2O2 Cathode by Three‐in‐One Surface Modification for Lithium‐Ion Batteries

Voltage decay and capacity fading are the main challenges for the commercialization of Li‐rich Mn‐based layered oxides (LLOs). Now, a three‐in‐one surface treatment is designed via the pyrolysis of urea to improve the voltage and capacity stability of Li_1.2Mn_0.6Ni_0.2O₂ (LMNO), by which oxygen vacancies, spinel phase integration, and N‐doped carbon nanolayers are synchronously built on the surface of LMNO microspheres. Oxygen vacancies and spinel phase integration suppress irreversible O₂ release and help lithium ion diffusion, while N‐doped carbon nanolayer mitigates the corrosion of electrolyte with excellent conductivity. The electrochemical performance of LMNO after the treatment improves significantly; the capacity retention rate after 500 cycles at 1 C is still as high as 89.9 % with a very small voltage fading rate of 1.09 mV cycle^?1. This three‐in‐one surface treatment strategy can suppress the voltage decay and capacity fading of LLOs.     

不同光谱预处理对激光诱导击穿光谱检测猪肉中铅含量的影响

为了研究适合激光诱导击穿光谱(LIBS)检测猪肉中重金属铅(Pb)元素含量的光谱预处理方法,将配制的84个猪肉腿肌样品分为校正集和预测集,以相关系数(R)、内部交叉验证均方差(RMSECV)和预测均方根误差(RMSEP)作为评价指标,比较了5种光谱预处理方法对偏最小二乘法(PLS)建模预测效果的影响.结果表明,多元散射校正(MSC)预处理效果最好,定标模型预测值与实验室分析元素检测值的相关系数(R)达到0.9908,RMSECV为0.302,RMSEP为0.282,主成分数为16,18个预测集样品的验证结果的平均相对预测误差(ARPE)为7.8％.说明MSC是LIBS检测猪肉Pb含量的有效光谱预处理方法,该研究为进一步实现食品中重金属快速定量分析提供了方法和数据参考.     

紫外光离子源-高场不对称波形离子迁移谱检测环境中挥发性有机物

本研究采用紫外光离子源-高场不对称波形离子迁移谱(UV-FAIMS)快速检测环境中挥发性有机物.选取苯和对二甲苯为研究对象,并分析了分离电压、流速等因素对其分离识别的影响.实验结果表明:当分离电压值为0～1200 V时,苯和对二甲苯信号强度逐渐降低,而特征补偿电压值却逐渐增加.实验选取分离电压值为900 V,当载气流速为0～240 L/h时,苯和对二甲苯的特征离子峰信号强度逐渐增加,当载气流速为0～120 L/h时,苯和对二甲苯团簇峰信号强度增加,当载气流速为120～240 L/h时,苯的团簇峰信号强度增加,而对二甲苯的团簇峰信号强度降低.此外,对样品浓度、信号强度与噪声的比值进行探讨,获得UV-FAIMS检测苯的检测限为0.011mg/m3.     

一种用于冶金炉前快速分析的新仪器——激光诱导击穿光谱仪

冶金炼钢要求快速分析冶金炉前样品来及时掌握冶炼过程。文章介绍了自主研制的一种新型的光谱仪——激光诱导击穿光谱仪,该仪器采用ns级脉宽的Nd∶YAG激光器作为样品离子化光源,激光聚焦样品表面激发产生的等离子体光谱依次经帕邢-龙格光学系统进行分光、光电倍增管探测、门控积分器积分、模拟数字转换器转换后获得的最终结果输入计算机进行数据处理。和目前冶金炉前样品分析常用的光谱仪相比,该仪器无需样品预处理,分析速度快(1 min或更少),准确灵敏度高,非常适用于冶金炉前样品的快速分析。近年来随着光纤技术的迅速发展,使用该仪器进行钢液实时在线分析和动态控制冶金工艺必将成为现实。     

Blue-phase liquid crystal display with high dielectric material

A blue-phase liquid crystal display (BPLCD) with low operating voltage and high transmittance is demonstrated by using a high dielectric material, which is used as an insulation layer or protrusion fixed on the pixel and common electrodes in in-plane switching (IPS) mode. The operating voltage is reduced to about 14 V and the transmittance is improved for the BPLCD with high dielectric constant protrusion. Compared with the conventional protrusion electrode structure, the proposed protrusion can make manufacturing process simple and easy because the electrode has no complex shape. The results will be significant in designing optimal BPLCDs.     

Theoretical analysis of magnetic sensor output voltage

The output voltage is an important parameter to determine the stress state in magnetic stress measurement, the relationship between the output voltage and the difference in the principal stresses was investigated by a comprehensive application of magnetic circuit theory, magnetization theory, stress analysis as well as the law of electromagnetic induction, and a corresponding quantitative equation was derived. It is drawn that the output voltage is proportional to the difference in the principal stresses, and related to the angle between the principal stress and the direction of the sensor. This investigation provides a theoretical basis for the principle stresses measurement by output voltage.     

An intracloud discharge caused by extensive atmospheric shower

The observational evidence of RB-EAS discharge in a thunderstorm atmosphere is presented. After RB-EAS discharge we name a discharge of a special type developing due to the runaway breakdown (RB) mechanism while an extensive atmosphere shower (EAS) passes through a thundercloud electric field. The observations were fulfilled at the Tien-Shan Mountain Cosmic Ray Station. The widely spread system of oscillation detectors, the special EAS trigger array and the HF radio interferometer were used for measurements.