Reduction of acetophenone using supercritical 2-propanol: the substituent effect and the deuterium kinetic isotope effect

The reductions of several substituted acetophenones using supercritical 2-propanol were carried out to estimate the Hammett's reaction constant (ρ=0.33). Also, the reduction of acetophenone using supercritical deuteriated 2-propanol was carried out to determine the rate-determining step. The kinetic isotope effects were observed in the reduction using 2-deuterio-2-propanol (k_H/k_D=1.6) and O-deuterio-2-propanol (k_H/k_D=2.0). These findings suggest that the reaction proceeds via a cyclic transition state between acetophenone and 2-propanol similar to that of the Meerwein-Ponndorf-Verley reduction.     

硼掺杂还原态氧化石墨烯催化剂的制备及其蒽催化加氢性能的研究

制备了一系列硼掺杂的还原氧化态石墨烯催化剂并应用于蒽加氢反应。结果表明，随着催化剂处理温度的升高，催化剂中有序碳结构会发生变化，硼会取代材料骨架中的碳，进而影响蒽和氢气的吸附活化。经硼改性后，催化剂对蒽加氢反应表现出了很高的加氢活性，蒽的最高转化率可达97%，深度加氢产物八氢蒽的最高选择性可达19%。     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Ultra-trace analysis of U,Th, Ca and selected heavy metals in high purity refractory metals with isotope dilution mass spectrometry

A method for the determination of trace impurities (U, Th, Ca, Fe, Cr, Ni, Cu, and Cd) in the refractory metals molybdenum and tungsten with isotope dilution mass Spectrometry (IDMS) has been developed. This method enables determinations of uranium and thorium down to the lowest pg/g level with high precision and accuracy. Selective chromatographic, extractive and electrolytic methods for the trace-matrix separation were combined with positive thermal ionization mass spectrometry. Different samples of high purity (4N) and of ultra high purity (UHP) materials for advanced technologies were analysed. The detection limits reached are (in ng/g): U 0.006, Th 0.008, Ca 10, Fe 19, Cr 0.5, Ni 0.6, Cu 2.7, and Cd 0.12. A comparison of results with other sensitive analytical methods (ICP-MS, GDMS, SIMS) makes obvious the urgent necessity of a reliable calibration method like IDMS because the analytical results obtained by the other methods often spread over a wide range.     

Boron chelate complexes with 4-[N-(R-pyrid-2-yl)carbamoyl]-3-amino-2-cyanobuten-2-ic acid esters (codimers of N-(R-pyrid-2-yl)amides and the ethyl ester of cyanoacetic acid)

Mono- and binuclear boron chelates have been synthesized by the action of butylthiodibutylborane on the ethyl esters of 4-[N-(R-pyrid-2-yl)carbamoyl]-3-amino-2-cyanobuten-2-ic acids (codimers of N-(R-pyrid-2-yl) amides and the ethyl ester of cyanoacetic acid). Complexes of this type can exist in solution in the form of two tautomers: acetamide acid derivatives or the corresponding ketene N,O-acetals.N. D. Zelinski Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 2162–2170, September, 1992.     

A study of methylation of inorganic tin by iodomethane in an aquatic environment with 13C carbon isotope tracer technique

The methylation of tin(II) [Sn(II)] by iodomethane (CH₃I) under environmental conditions has been further demonstrated by a ¹³C carbon isotope tracer method. Methylation products are mainly monomethyltin, and very small amounts of dimethyltin. The reaction of Sn(II) and CH₃I was investigated at pH 2, 4, 6, 8, 10 and salinity (S) 8, 15, 22, 28, 35%; it has been found the reaction was affected by pH and salinity, the tin methylation activity being highest at about pH 6 and S = 28% . The methylation reaction is first-order for both CH₃I and Sn(II), and the rate equation has been obtained as follows: .     

Electron microscopic phase analysis of BN-thin films

A series of BN films was deposited by means of r.f. magnetron sputtering of a h-BN target onto Si(1OO) surfaces. Hereby, the substrate bias voltage was varied. Special interest is focussed to the influence of the deposition parameters on the orientation of the growing hexagonal BN film with respect to the substrate. For structural investigation, cross section samples were prepared. In addition to HRTEM and diffraction investigations, especially electron energy loss spectroscopy (EELS) was applied successfully for phase identification. For negative bias voltages of U _B =–300 V and U _B =–350V, we found a phase system consisting of a first-grown 25 nm thick layer of hexagonal structure with the c axis parallel to the substrate surface followed by the cubic phase.Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Classifying wine according to geographical origin via quadrupole-based ICP–mass spectrometry measurements of boron isotope ratios

The potential of quadrupole-based ICP–MS as a tool for B-isotopic analysis of wines and its usefulness in provenance determinations were assessed. A precision of 0.1–0.25% RSD (corresponding to a relative standard deviation of the mean of three replicate measurements of 0.06–0.12%) was sufficient to establish small differences in the B isotope ratios in wines from different geographical origins. Each sample measurement was bracketed by measurements of a standard and mass bias drift correction made by interpolation. Sample preparation was kept to a minimum to avoid possible fractionation. Dilution of the wine samples by a factor of 100 with 0.65% HNO₃ was found to reduce matrix-induced mass discrimination substantially. Wines from three wine-producing regions, Stellenbosch, Robertson, and Swartland, in the Western Cape Province of South Africa, and wines from specific regions in France (Bergerac) and Italy (Valpolicella) were analyzed by ICP–QMS for their B-isotopic compositions. It was concluded that the ¹¹B/¹⁰B ratios can be used to characterize wines from different geographical origins. Average ¹¹B/¹⁰B ratios in red wines from South Africa (Stellenbosch), France (Bergerac), and Italy (Valpolicella) were found to differ by between 0.5 and 1.5%.     

Volumetric properties of H2O, D2O, and methanol in acetonitrile at 278.15—318.15 K

The densities of H₂O, D₂O, and MeOH solutions in acetonitrile with the solute concentrations up to 0.07 molar fractions at 278.15, 288.15, 298.15, 308.15, and 318.15 K were measured using vibrating-tube densimetry with an error 8·10^–6 g cm^–3. The limiting partial molar volumes for the H/D isotopomers of water and IaII in acetonitrile (V^– ₂ ) and the isotope effects in V^– ₂ and in excess molar volumes of acetonitrile—water mixtures were calculated. Molecules of H₂O, D₂O, and IaII form associates with acetonitrile molecules via hydrogen bonds. The associates have the packing volumes close to those in the individual solute. The water and methanol molecules were assumed to be incorporated into the acetonitrile structure without substantial changes in the latter. However, this process results in some compression of the system with a simultaneous increase in its expansibility.     

Determination of boron in boron-alloyed steels by inductively coupled plasma atomic emission spectrometry

An inductively coupled plasma atomic emission spectrometry (ICP-AES) procedure has been developed and examined for the determination of boron content (0.01 up to about 2% B) in boron-alloyed steels such as POLDI ATA BOR (65% Fe, 19%Cr, 12% Ni, 1.5% Mn, 1% B), POLDI ATA BOR EXTRA (62% Fe, 18% Cr, 13% Ni, 2.5% Mo, 1.5% Mn, 1% B) and POLDI ATA BOR-R (75% Fe, 18% Cr, 3.5% Ti, 1.8% B). The steel sample is dissolved with a mixture of hydrochloric, nitric, sulfuric and phosphoric acids in a quartz vessel. Borides of alloyed metals, especially of iron and chromium, are quantitatively decomposed. The presence of phosphoric acid in a sample solution reduces the volatility of boric acid with water vapour.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria