TRANSESTERIFICATION OF POLY（BISPHENOL A CARBONATE） WITH AROMATIC AND ALIPHATIC SEGMENTS IN BUTYLENE TEREPHTHALATE-CAPROLACTONE COPOLYESTER

In this article, the transesterification of poly(bisphenol A carbonate) (PC) with butylene terephthalate-caprolactone copolyester at a weight ratio 50/50 (BCL(21)) was thoroughly investigated by proton nuclear magnetic resonance spectroscopy (^1H-NMR), in conjunction with a model compound. The ^1H-NMR results of the annealed blend PC/BCL(21) show that the formation of bisphenol A-terephthalate ester units is the same as in the annealed blend of PC with PBT, and the transesterification actually occurs between PC and butylene terephthalate (BT) segments in BCL(21). By comparison with the model compound bisphenol A dibutyrate, the new signal appearing at δ=2.56 in the ^1H-NMR spectrum confirms the existence of bisphenol A caprolactone ester units resulting from the exchange reaction of PC with caprolactone (CL) segments. ^1H-NMR analysis of the transesterification rates reveals that the reaction of PC with aromatic and aliphatic segments in BCL(21) proceeds in a random manner. The miscibility of the blend PC/BCL(21) copolyester is favorable for the transesterification of PC with BT segments and CL segments.     

Properties and morphology of recycled poly(ethylene terephthalate)/bisphenol a polycarbonate/poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) blends by low‐temperature solid‐state extrusion

Among the various methods available for recycling plastics waste, blending technology is a straightforward and relatively simple method for recycling. In this paper, a new blending technology, low‐temperature solid‐state extrusion, was discussed. Several recycled poly(terephthalate ethylene)/bisphenol a polycarbonate/poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) blends (R‐PET/PC/SEBS blends) have been prepared by this technology. The results show that thermal and hydrolytic degradation of R‐PET is improved when extruding temperature was between the glass transition temperature (T_g) and cold crystallization temperature (T_cc). Elongation at break and notched impact strength were increased evidently, from 15.9% to 103.6, and from 8.6 kJ/m² to 20.4 kJ/m², respectively. The appropriate rotating speed of screws was between 100 and 150 rpm. At the same time, the appropriate rotating speed of the screws brings a suitable shear viscosity ratio of R‐PET and PC, which is of advantage to blending of R‐PET and PC together with SEBS. Dispersion of minor phase, PC and SEBS, became finer and smaller, to about 1 µm. Chain extender, Methylenediphenyl diisocyanate (MDI) can react with the end‐carboxyl group and end‐hydroxyl group of R‐PET. FT‐IR spectra testified that the reactions have been happened in the extruding process. A chain extending reaction not only increased the molecular weight of PET and PC, but also can synthesize PET‐g‐PC copolymer to act as a reactive compatilizer. An SEM micrograph shows that a micro‐fiber structure of PET was formed in the blend sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Monomer migration and degradation of polycarbonate via UV-C irradiation within aquatic and atmospheric environments

Polycarbonates (PC) are widely used in daily life as commodity plastics and it is a critical material regarding to the public health for the consequences that may arise especially for infants due to usage in baby bottles. Therefore, understanding the behavior of PC within the degradative environment is vital. In this study, degradation of polycarbonate via UV-C irradiation was studied within atmospheric and aquatic environments. Mechanical, morphological, thermal tests NMR, TGA, SEM, DSC, Extensometer, Yellowness Index, FTIR and HPLC tests of samples irradiated with different irradiation periods within these two environments were carried out. The analysis results have shown that for both of aquatic and atmospheric environments, the degradation and morphological changes were occurred. Structure tests results show that the main degradation occurred on the carbonate group of PC. In addition, significant amount of Bisphenol A was detected via HPLC analysis in the aquatic solution after irradiation in aquatic environment that could be hazardous for the public health.     

Concentration of bisphenol A in thermal paper

Abstract

Bisphenol A (BPA) is widely used as a color developer in thermal paper. Thermal paper is ubiquitous in daily life due to its use in cash register receipts, so opportunities for human contact abound. For this study, 10 blank cash register receipts were obtained from businesses in suburban Boston. BPA was extracted and analysis of concentration was performed using gas chromatograph/flame ionization detector. In some receipts, BPA was not detected but in others it was as high as 19 mg for a 12-inch long receipt, which is in line with concentrations indicated in patents. This study is intended to highlight the potential for human exposure to BPA as well as the ease with which exposure may be reduced through the use of BPA-free thermal paper.     

Polyrotaxanes based on polyethers and β‐cyclodextrin

A polyrotaxane in which β‐cyclodextrins (β‐CDs) are threaded onto a polyether chain was prepared by polycondensation of a β‐CD/bisphenol A (BPA) inclusion complex with aromatic dihalides. Two dihalides, with and without a side chain, were used. This polycondensation results in a polyrotaxane (or pseudopolyrotaxane for polymers without stoppers) with a 1:1 threading ratio when the side chain is present and 2:3 when there is none. The long side chain prevents dethreading of the macrocycles. The best yield and a good threading ratio were obtained when the polycondensation was performed by liquid?solid phase transfer catalysis without solvent (L/S PTC) using 2,5‐bi(iodomethyl)‐4‐methoxy‐(1‐octyloxy)benzene as dihalide. The ¹H NMR and FTIR spectra show that the products consist of β‐CD and polyether. The 2D NOESY NMR spectrum shows that the polyether chains are included in the β‐CD cavity. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4391–4399, 2009     

Determination of Trace Bisphenol A in Leachate by Solid Phase Microextraction Coupled with High Performance Liquid Chromatography

Abstract

A rapid determination method for trace bisphenol A in leachate by solid phase microextraction (SPME) coupled with high performance liquid chromatography (HPLC) was developed. The experimental condition of SPME, such as select operation, solid phase microextraction fibers, pH, extraction time, extraction temperature, desorption time, desorption solution, mode, and the analytical conditions of HPLC were optimized. As compared with the graph that was produced by HPLC alone, the graph by only HPLC couldn't analyze bisphenol A and compared to the results of three solid‐phase microextraction fibers. The linear range was between 0.0128 mg/L and 0.192 mg/L in this method, and the correlative coefficient was 0.9975. Limits of detection, repeatability, and reproducibility were also determined. The limit of detection of this method was 3.25 µg/L (3σ, n=11). The relative standard deviation (RSD, n=3) was 4.4%. The method was used for the determination of trace bisphenol A in leachate of Qingshan landfill and leachate of Liufang landfill. The recoveries were between 94.5% and 103.3%. This method is fast, convenient, sensitive, solvent free, and suitable for the determination of trace bisphenol A in leachate.     

High performance toughened cyanate ester resin with low injection temperature for RTM process

A high‐performance modified cyanate resin system with low injection temperature for fabricating advanced composites via resin transfer molding (RTM) was developed, which was made of bisphenol A dicyanate ester (BADCy) and diallyl phthalate (DAP). The processing characteristics, mechanical, and thermal properties of the resin were studied, and the effect of the content of DAP on the processing and performance parameters was discussed. The results show that the processing properties of the modified cyanate system are dependent on the content of DAP. All the formulations studied in this paper have good processing characteristics; their injection temperatures are between 30 and 40°C and the pot life is about 20 hr at 50°C. The cured resins exhibited good thermal stability, excellent toughness, and good hot–wet resistance, suggesting that the toughened cyanate resin is a potential high‐performance RTM matrix for advanced composites. Copyright © 2008 John Wiley & Sons, Ltd.     

Shielded molecularly imprinted polymers prepared with a selective surface modification

Uniformly sized, molecularly imprinted polymers (MIPs) of bisphenol A (BPA), one of many potential endocrine disruptors, were prepared by selective surface modification and immobilized at intervals of functional monomers with 4,4′‐methylenebisphenol as a pseudotemplate. MIPs for BPA were prepared with 4‐vinyl pyridine immobilized at the most effective interval and with ethylene glycol dimethacrylate monomer as a functional crosslinker. The prepared MIPs were surface‐modified with both polar and ionic monomers with different modification methods and then evaluated to reveal their selectivity and retention characteristics. Some of the modified MIPs showed significant selectivity for BPA retention when they were used as high‐performance liquid chromatography (HPLC) stationary phases, in comparison with ordinary MIPs. This effect of molecular imprinting was retained even after the surface modification of MIPs. The MIPs employed as pretreatment media for a column‐switching HPLC system provided a detection limit as low as 1 ng/L (ppt) by electrochemical detection. Actual samples, including Suwannee River natural organic matter (NOM), were analyzed for BPA, and BPA was quantitatively detected in NOM even with the combination with widely used UV detection because of the effective removal of interference afforded by an effective surface modification of the MIPs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2048–2060, 2005     

Synthesis and sulfonation of poly(arylene ether)s containing tetraphenyl methane moieties

Novel poly(arylene ether)s with sulfonic acid containing pendent groups were successfully synthesized by the nucleophilic displacement of aromatic dihalides with bisphenols in an aprotic solvent in the presence of excess potassium carbonate followed by sulfonation with chlorosulfonic acid. The sulfonation took place only at the controlled positions on the phenyl rings due to the novel bisphenol structures designed. The sulfonic acid group containing polymers were very soluble in common organic solvents, such as dimethyl sulfoxide, N,N′‐dimethylacetamide, and dimethylformamide, but swelled only slightly in water. These sulfonic acid group containing polymers were readily cast into tough and smooth films from organic solvents. The synthesized polymers had high glass‐transition temperatures of 171.0–240.7 °C and high molecular weights of 15,600–33,000 Da. These films could potentially be used as proton‐exchange membranes for fuel cells. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1779–1788, 2004     

Syntheses of cyclic polycarbonates by the direct phosgenation of bisphenol M

Bisphenol M was subjected to interfacial polycondensations in an NaOH/CH₂Cl₂ system with triethylamine as a catalyst. Regardless of the catalyst concentration, similar molecular weights were obtained, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra exclusively displayed mass peaks of cycles (detectable up to 15,000 Da). With triethyl benzyl ammonium chloride as a catalyst, linear chains became the main products, but the contents of the cycles and the molecular weights strongly increased with higher catalyst/bisphenol ratios. When the pseudo‐high‐dilution method was applied, both diphosgene and triphosgene yielded cyclic polycarbonates of low or moderate molecular weights. Size exclusion chromatography measurements, evaluated with the triple‐detection method, yielded bimodal mass distribution curves with polydispersities of 5–12. Furthermore, a Mark–Houwink equation was elaborated, and it indicated that the hydrodynamic volume of poly(bisphenol M carbonate) was quite similar to that of poly(bisphenol A carbonate)s with similar concentrations of cyclic species. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1248–1254, 2005