LSGMC5含量对于二甲醚燃料电池复合Ni-Fe阳极性能的影响

用浸渍法制备了掺杂不同质量分数的La0.8Sr0.2Ga0.8Mg0.15Co0.05O3-δ (LSGMC5)粉末的Ni8-Fe2-LSGMC5复合阳极, 并采用交流阻抗和直流极化技术考察了以氢气和二甲醚为燃气时该复合阳极的电化学性能及相应电池的功率输出特性. 结果表明, 在电极中掺入LSGMC5 粉末, 能显著地改善电极的形貌和电极/电解质界面结构, 减小欧姆电阻和极化电阻. 电极中LSGMC5 粉末含量对于氢气及二甲醚电化学氧化性能的影响显著不同. 以二甲醚为燃气时, 电极极化电阻随LSGMC5 粉末含量的增加而减小, 其中LSGMC5 掺杂量为30%的复合阳极具有最高的电化学性能, 相应电池在1073、1023、973 K 时的输出功率分别为1.00、0.61、0.40 W·cm-2; 以氢气为燃气时, LSGMC5 掺杂量为20%的复合阳极具有最好的电化学性能, 随着LSGMC5 掺杂量的进一步增加, 电极极化电阻显著增大.     

Electrochemical instability of bis(trifluoromethylsulfonyl)imide based ionic liquids as solvents in high voltage electrolytes for potassium ion batteries

1. Download : Download high-res image (153KB)
2. Download : Download full-size image

     

高铁酸盐在SnO2-Sb2O3/Ti电极上的选择性电化学合成

合成了SnO2-Sb2O3/Ti电极材料.实验结果证实,在14mol/LNaOH水溶液中和完全避免析氧反应的条件下,Fe(Ⅱ)物种在该电极上进行电化学氧化并生成FeO42-.结果表明,Fe(OH)3在浓NaOH溶液中发生酸式电离,形成可溶于水的FeO2-,该离子的浓度随着碱溶液浓度变化而发生明显变化,而且它还是发生化学氧化和电化学氧化的反应物.在SnO2-Sb2O3/Ti电极上,FeO42-的电化学还原起始电位为0.38V(vs.Hg/HgO,14mol/LNaOH),FeO2-电化学氧化起始电位为0.54V.结果还表明,用电化学方法氧化Fe(Ⅱ)物种生成FeO42-是个多步骤过程.     

炼铝用碳阳极中碱金属氧化物作用机理的量子化学研究

本文应用CNDO/2法研究了炼铝用碳阳极中添加碱金属氧化物的吸附行为, 通过优化得到了吸附的最佳模型, 考察了吸附结合能随分子间距的变化, 进而给出了碱金属氧化物在碳阳极中作用的机理。量子化学计算结果表明: 碱金属氧化物添加到炼铝用碳阳极中起传输电子的电桥作用, 是碳阳极在空气中氧化反应以及铝电解时生成氧气的氧化反应的催化剂; 理论计算和实验结果二者吻合较好, 可以用来解释若干实验结果。     

掺杂PbO2/Ti阳极在硫酸铬电氧化过程的电极行为

PbO2/Ti 电极具有耐腐蚀性能好、导电性强、析氧过电位高等优点,已成功地应用在无机和有机化合物电解生产、环境污染控制、阴极保护以及电浮选等方面[1-3].     

ICP-AES法测定锌阳极中的铝、镉、铁、铜、铅

通过分析高频功率、雾化压力、辅助气流量和泵速等试验条件，建立了ICP-AES法测定锌阳极中铝、镉、铁、铜、铅的方法。用该方法测定锌阳极中的铝、镉、铁、铜、铅，其RSD分别为0.17%、0.63%、2.7%、5.2%、2.5%，回收率分别为99.3%-101.2%，99.3%-100.3%、97.1%-102.2%、97.8%-102.9%。对锌阳极试样进行测定，该方法的测定结果与GB4951-85方法的测定结果基本一致。     

Cellulose-precursor synthesis of nanocrystalline Ce<Subscript>0.8</Subscript>Gd<Subscript>0.2</Subscript>O<Subscript>2−δ</Subscript> for SOFC anodes

Developments of intermediate-temperature solid oxide fuel cells (IT SOFCs) require novel anode materials with a high electrochemical activity at 800–1070 K. The polarization of cermet anodes, made of nickel, ceria and yttria-stabilized zirconia (YSZ) and applied onto a YSZ solid electrolyte, can be significantly reduced by catalytically active ceria additions, the relative role of which increases with decreasing temperature. Further improvement is observed when using Ce_0.8Gd_0.2O_2– (CGO) having a high oxygen ionic conductivity instead of undoped ceria, owing to enlargement of the electrochemical reaction zone. Nanocrystalline CGO powders with grain sizes of 8–35 nm were thus synthesized via the cellulose-precursor technique and introduced into Ni–CGO–YSZ cermets, and tested in contact with a (La_0.9Sr_0.1)_0.98Ga_0.8Mg_0.2O_3– (LSGM) electrolyte at 873–1073 K. The results showed that the anode performance can be enhanced by additional surface activation, in particular by impregnation with a Ce-containing solution, and also by incorporation of YSZ, which probably acts as a cermet-stabilizing component. The overpotential of the surface-modified Ni–CGO (25 wt%–75 wt%) anode in a 10% H₂/90% N₂ atmosphere was approximately 110 mV at 1073 K with a current density of 200 mA/cm².Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10–12 April 2003     

Surface modification of carbon anodes for secondary lithium battery by fluorination

Recent results on the surface modification of petroleum cokes and their electrochemical properties as anodes of secondary lithium batteries are summarized. The surface of petroleum coke and those heat-treated at 1860-2800 °C were fluorinated by elemental fluorine (F₂), chlorine trifluoride (ClF₃) and nitrogen trifluoride (NF₃). No surface fluorine was found except only one sample when ClF₃ and NF₃ were used as fluorinating agents while surface region of petroleum coke was fluorinated when F₂ was used. Transmission electron microscopic (TEM) observation revealed that closed edge of graphitized petroleum coke was destroyed and opened by surface fluorination. Raman spectra showed that surface fluorination increased the surface disorder of petroleum cokes. Main effect of surface fluorination with F₂ is the increase in the first coulombic efficiencies of petroleum cokes graphitized at 2300-2800 °C by 12.1-18.2% at 60 mA/g and by 13.3-25.8% at 150 mA/g in 1 mol/dm³ LiClO₄-ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). On the other hand, main effect of the fluorination with ClF₃ and NF₃ is the increase in the first discharge capacities of graphitized petroleum cokes by ∼63 mAh/g (∼29.5%) at 150 mA/g in 1 mol/dm³ LiClO₄-EC/DEC.     

锂离子二次电池碳负极材料的改性

作为锂离子二次电池的碳负极材料，其改性方面的研究内容主要有：引入非金属元素，引入金属元素，处理表面及其它方面。纺入的非金属元素有硼，硅，氮，磷和硫。引入的金属元素有钾，铝，镓和钒，镍，钴，铜，铁等过渡金属元素。表面处理的方法包括氧化，形成表面层等。     

The influence of the sacrificial anode nature on the mechanism of electrochemical arylation and alkylation of white phosphorus

The material of the sacrificial anode has a substantial effect on the nature and yield of the target products of electrochemical phosphorylation of organic halides by white phosphorus in the presence of the nickel complexes with 2,2"-bipyridine. The use of the zinc anode results in the products with tricoordinated phosphorus, viz., triorganylphosphines, the reaction on the aluminum anode affords triorganylphosphine oxides, and the presence of Mg²⁺ ions in the reaction mixture provides the transformation of white phosphorus into cyclic phosphines (PhP)₅.