超临界流体触媒作用下石墨-金刚石转变

 研究了超临界流体CO₂在石墨-金刚石转变中的触媒作用。实验中，采用Ag₂O作为流体触媒的先驱材料，在7.7 GPa压力下，Ag₂O在1 200 ℃分解成Ag和O₂，O₂与石墨套管在高温高压下反应形成CO₂超临界流体。研究结果表明，在7.7 GPa和1 500 ℃以上温度条件下，石墨在CO₂流体触媒的作用下可转变为金刚石晶体，在1 500～1 700 ℃温度范围内合成出的金刚石具有完好的八面体形貌，与天然金刚石的生长特征非常相似。     

Stochastic techniques for global optimization: A survey of recent advances

In this paper stochastic algorithms for global optimization are reviewed. After a brief introduction on random-search techniques, a more detailed analysis is carried out on the application of simulated annealing to continuous global optimization. The aim of such an analysis is mainly that of presenting recent papers on the subject, which have received only scarce attention in the most recent published surveys. Finally a very brief presentation of clustering techniques is given.     

Theory of high temperature superconductivity in YBa2Cu3O7_δ

A theory of high temperature superconductivity in YBa₂Cu₃O₇__δ compound has been developed on the basis of the momentum pairing of electrons through the relativistic Darwin interaction. The transport behaviour of electrons is explained in terms of a mechanism of correlated electron transfer arising from the electron-phonon coupling. A model Hamiltonian has been developed to describe the superconducting properties of the system. This gives an energy gap which is higher than the BCS value. Attempts have been made to explain the absence of isotope effect, the linear dependence of specific heat, the presence of larger temperature-independent paramagnetism in the normal phase and the softening of some of the optic phonon modes observed in this system.     

Simulated annealing with noisy or imprecise energy measurements

The annealing algorithm (Ref. 1) is modified to allow for noisy or imprecise measurements of the energy cost function. This is important when the energy cannot be measured exactly or when it is computationally expensive to do so. Under suitable conditions on the noise/imprecision, it is shown that the modified algorithm exhibits the same convergence in probability to the globally minimum energy states as the annealing algorithm (Ref. 2). Since the annealing algorithm will typically enter and exit the minimum energy states infinitely often with probability one, the minimum energy state visited by the annealing algorithm is usually tracked. The effect of using noisy or imprecise energy measurements on tracking the minimum energy state visited by the modified algorithms is examined.The research reported here has been supported under Contracts AFOSR-85-0227, DAAG-29-84-K-0005, and DAAL-03-86-K-0171 and a Purdue Research Initiation Grant.     

红外热像仪参数的双黑体测量装置

对红外热像仪参数双黑体测量装置的工作原理进行了介绍。装置采用双黑体及反射型靶标为温差辐射源，可实现黑体温度温差准直辐射的定期校准和红外热像仪参数测量量值的溯源，也可实现红外热像仪参数的可控性，以及对它进行稳定的、可复现的精确测量。推导出利用红外热像仪参数双黑体测量装置测量信号传递函数SiTF数学模型，分析了红外热像仪参数测量装置的客观因素——仪器常数，针对仪器常数对SiTF测量的影响进行了试验。试验结果表明，仪器常数对红外热像仪SiTF参数测量精度影响较大，并同时影响时域与空域NETD及3D噪声的准确测量。     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

a-C:F薄膜的热稳定性与光学带隙的关联

以CF4和C6H6的混合气体作为气源,在微波电子回旋共振化学气相沉积(ECRCVD)装置中制备了氟化非晶碳薄膜(aC:F),并在N2气氛中作了退火处理以考察其热稳定性.通过傅里叶变换红外吸收谱和紫外可见光谱获得了薄膜中CC双键的相对含量和光学带隙,发现膜中CC键含量与光学带隙之间存在着密切的关联,在高微波功率下沉积的氟化非晶碳膜具有低的光学带隙和较好的热稳定性. 关键词： 氟化非晶碳膜 光学带隙 退火温度 热稳定性     

Scale Invariance Properties in the Simulated Annealing Algorithm

The Boltzmann distribution used in the steady-state analysis of the simulated annealing algorithm gives rise to several scale invariant properties. Scale invariance is first presented in the context of parallel independent processors and then extended to an abstract form based on lumping states together to form new aggregate states. These lumped or aggregate states possess all of the mathematical characteristics, forms and relationships of states (solutions) in the original problem in both first and second moments. These scale invariance properties therefore permit new ways of relating objective function values, conditional expectation values, stationary probabilities, rates of change of stationary probabilities and conditional variances. Such properties therefore provide potential applications in analysis, statistical inference and optimization. Directions for future research that take advantage of scale invariance are also discussed.     

生长温度对碳纳米管阴极场发射性能的影响

碳纳米管(Carbon Nanotubes,CNTs)场发射平面显示器(Field Emission Display,FED)与其他显示器比较显示了其独特优点,被认为是未来理想的平面显示器之一。碳纳米管阴极作为器件的核心部分,其性能的好坏直接影响显示器的性能。针对30~60英寸(76.2~152.4cm)大屏幕显示器所用的厚膜工艺,即采用丝网印刷法制备了碳纳米管阴极阵列,研究了化学气相沉积法在不同温度下生长的CNTs的场发射电流-电压特性,找到了适合FED用碳纳米管的最佳生长温度。结果表明生长温度越高(750℃),CNTs场发射性能越好。并用荧光粉阳极测试这些CNTs的场发射发光显示效果,验证了上述结论。     

连续激光诱导Zn/InP掺杂过程中温度分布的解析计算

在实验的基础上，分析表面蒸发Zn的InP样品在连续激光诱导下掺杂Zn过程.在一维热传导问题的第三类边界条件下，给出激光辐照有限厚双层材料Zn/InP温度分布的一种直观简洁的解析形式. 关键词： 激光诱导掺杂 Zn/InP 温度分布