气相法分析3-氯-2-羟丙基三甲基氯化铵中的微量有机杂质

 以氯仿为萃取剂 ,对 3 氯 2 羟丙基三甲基氯化铵 (CHPTMA)水溶液进行萃取 ,用气相法分析了CHPT MA溶液中的微量有机杂质环氧氯丙烷和 1 3 二氯丙醇。柱为 2m× 3mmi d 的不锈钢填充柱 ,固定相为10 %的PEG 2 0M ,载体为ChromosorbW/AW。环氧氯丙烷和 1,3 二氯丙醇的回收率分别为 97 5 %～ 10 5 0 %和93 3%～ 98 8% ,相对标准偏差分别为 11 5 %和 13 1% ,最低检测限分别为 5 0 μg/g和 10 0 μg/ g。     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Zur Struktur und Reaktivität des Diammoniumhexafluoromanganats(IV)

About the Structure and Reactivity of Diammonium Hexafluoromanganate(IV) Electrolytic oxidation of an aqueous suspension of MnF₂ containing NH₄F, and subsequent crystallization in 40% HF yields yellow crystals of (NH₄)₂MnF₆. It crystallizes in the hexagonal K₂MnF₆ type structure with the space group P6₃mc and a = 5.903; c = 9.565 Å; Z = 2. With in situ powder diffraction studies it is shown, that (NH₄)₂MnF₆ is gradually reduced in a NH₃ atmosphere between 30 and 230 °C to afford (NH₄)₃MnF₆, (NH₄)₂MnF₅, and finally NH₄MnF₃. (NH₄)₃MnF₆, thereby, forms a hitherto unknown cubic (a = 9.082 Å) high temperature modification with the cryolite type structure. Under N₂ the thermal decomposition of (NH₄)₂MnF₆ proceeds via NH₄MnF₄ to yield MnF₂.     

二钼酸铵晶体饱和水溶液Raman光谱的变异现象及其机理

记录了常温下二钼酸铵晶体饱和水溶液的Raman光谱，并分别与二钼酸铵晶体、仲钼酸铵晶体、仲钼酸铵晶体饱和水溶液、水溶液状态下单钼酸根离子的Raman光谱进行了比较研究。结果表明：二钼酸铵晶体饱和水溶液Raman光谱相对二钼酸铵晶体Raman光谱，明显地发生了变异现象。二钼酸铵晶体饱和水溶液Raman光谱其主要特征峰最高振动频率937.6 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征峰最高振动频率937.6 cm^-1完全吻合，而其次高振动频率893.9 cm^-1，恰好介于水溶液中单钼酸根离子Raman光谱主要特征峰最高振动频率895.1 cm^-1与仲钼酸铵晶体饱和水溶液Raman光谱主要特征次高峰振动频率891.0 cm^-1之间，而且三者彼此接近。二钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值为2.1，与仲钼酸铵晶体饱和水溶液Raman光谱主、次特征峰强度之比值4.4相比，一半不足。提出了一种利用Raman光谱主要特征峰振动频率及其主、次特征峰强度之比值对二钼酸铵晶体饱和水溶液组分同时进行定性和半定量分析的新方法。发现了常温下二钼酸铵晶体饱和水溶液中二钼酸根离子Mo₂O₇^2-已经不复存在，完全转变成了优势组分仲钼酸根离子Mo₇O₂₄^6-和次要组分单钼酸根离子MoO₄^2-；证明了常温下含钼水溶液酸化过程中溶液Raman光谱离散性变化现象的存在。运用结构化学和物理化学原理同时讨论了二钼酸铵晶体饱和水溶液Raman光谱发生变异现象的机理。     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

以短链季铵盐/脂肪酸盐为模板合成超微孔二氧化硅

超微孔材料具有1~2 nm的孔径,在分离、催化应用中有望展现出择形催化的能力。 寻找经济、简便的合成超微孔材料的表面活性剂体系是一项有意义的工作。 本研究以短链季铵盐(十烷基三甲基溴化铵,记为C₁₀TAB)和不同链长脂肪酸酸盐混合胶束为模板剂,硅酸钠为硅源,成功制备出高度有序超微孔SiO₂。 通过小角X射线衍射、N₂吸附-脱附、傅里叶变换红外光谱、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等技术手段对产品的结构和性能进行了表征。 结果表明,合成体系中脂肪酸盐碳链长、加入量、晶化温度等对产物孔道有序性有很大影响。 当选择正辛酸钠(SO)为助表面活性剂,当n(C₁₀TAB):n(Na₂SiO₃):n(SO):n(H₂O)=1:1.5:0.3:800,晶化温度为80 ℃时,可以得到高度有序超微孔SiO₂。 煅烧后样品比表面积为1300 m²/g,孔体积0.49 cm³/g,孔径分布在1.90 nm。     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Electrochemical grafting by reduction of 4-aminoethylbenzenediazonium salt: Application to the immobilization of (bio)molecules

We propose in this study a simple and rapid way to produce stable amino-derivatized conductive surfaces for the subsequent immobilization of (bio)molecules. This was achieved through the use of (4-aminoethyl)benzenediazonium salt (AEBD), which was immobilized on glassy carbon and gold electrodes by its electrochemical reduction. The presence of terminal grafted amino functions was evidenced with XPS by analyzing N1s core level. Besides this conventional surface characterisation, an electrochemical strategy is proposed here to evidence the presence of immobilized amines, in which the chemical reactivity of amines towards 2,4,6-trinitrobenzenesulfonic acid (TNBS) is used. Surface-bound TNBS served as an electrochemical marker and was detected by cyclic voltammetry. Additionally, pre-modified gold electrodes with amino functions can be derivatized with biomolecules such as glutathione (GSH). Glutathione attachment was evidenced by studying the electrochemical behaviour of ferri/ferrocyanide redox before and after its immobilization. The functionalized electrodes were then used for the detection of copper ions in neutral aqueous solutions.     

一种新颖有机-无机杂化配位聚合物[(C10H16N)2（Pb2I6）·2DMF·H2O]n的自组装合成和晶体结构(英)

A novel coordination polymer [(C₁₀H₁₆N)₂（Pb₂I₆）·2DMF·H₂O]_n (C₁₀H₁₆N=N-butyl-2-Methy-Pyridinium) was synthesized by the reaction of Pb(NO₃)₂ with C₆H₁₀NI at room temperature in DMF solvent and structurally characterized by means of X-ray single diffraction. The title compound crystallizes in triclinic system, space group P1 with a=1.1237(2) nm, b=1.25330(16) nm, c=0.808 00(12) nm, α=102.523(4)°, β=92.475(5)°, γ=95.712(10)°, V=1.102 9(3) nm³, Z=1, D_c=2.470 Mg·m^-3, F(000)=738, chemical formula C₂₆H₄₈N₄O₃Pb₂I₆ and M_r=1 640.46, μ（MoKα）=11.849 mm^-1, the final R=0.057 8 and wR=0.166 5 for 3716 observed reflections with I > 2σ(I). The title compound consists of cations ([(C₁₀H₁₆N)⁺] and anion chain(PbI₃^-),they are combined by static attracting forces in the crystal. DMF and H₂O locate between the organic and inorganic moiety. CCDC: 210812.     

N-Acyltrifluoromethanesulfonamides as new chemoselective acylating agents for aliphatic and aromatic amines

This work describes advances in the study of the internal condensation of ammonium salts of N-acylsulfonamides. N-Acyltrifluoromethanesulfonamides show considerable advantages over the non fluorinated analogues by virtue of their higher reactivity and acidity. The reaction chemoselectivity has been investigated using a wide range of amines. The sensitivity of the reaction to steric and electronic effects confirms the potential application of these reagents in chemoselective acylation of polyamines.