Two new zinc(II) and mercury(II) complexes based on N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide): synthesis,crystal structures and antibacterial activities

Reaction of N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide), C₂₀H₁₈F₂N₄O₂, ( L^F ), with zinc chloride and mercury(II) chloride produced different types and shapes of neutral coordination complexes, namely, dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ²N,O]zinc(II), [ZnCl₂(C₂₀H₁₈F₂N₄O₂)], ( 1 ), and dichlorido[N,N′‐(cyclohexane‐1,2‐diylidene)bis(4‐fluorobenzohydrazide)‐κ⁴O,N,N′,O′]mercury(II), [HgCl₂(C₂₀H₁₈F₂N₄O₂)], ( 2 ). The organic ligand and its metal complexes are characterized using various techniques: IR, UV–Vis and nuclear magnetic resonance (NMR) spectroscopies, in addition to powder X‐ray diffraction (PXRD), single‐crystal X‐ray crystallography and microelemental analysis. Depending upon the data from these analyses and measurements, a typical tetrahedral geometry was confirmed for zinc complex ( 1 ), in which the Zn^II atom is located outside the bis(benzhydrazone) core. The Hg^II atom in ( 2 ) is found within the core and has a common octahedral structure. The in vitro antibacterial activities of the prepared compounds were evaluated against two different bacterial strains, i.e. gram positive Bacillus subtilis and gram negative Pseudomonas aeruginosa bacteria. The prepared compounds exhibited differentiated growth‐inhibitory activities against these two bacterial strains based on the difference in their lipophilic nature and structural features.     

In-situ constructing visible light CdS/Cd-MOF photocatalyst with enhanced photodegradation of methylene blue

Based on high specific surface area, high porosity of metal-organic frameworks (MOFs) and excellent visible light response of CdS, the CdS/Cd-MOF nanocomposites were constructed by in-situ sulfurization to form CdS using Cd-MOF as precursor and the CdS loading was controlled by the dose of thioacetamide. Under the irradiation of simulated sunlight, the degradation rate of methylene blue (MB) by 10 mg MOF/CdS-6 (mass ratio of MOF to thioacetamide is 6:1) was 91.9% in 100 min, which was higher than that of pure Cd-MOF (62.3%) and pure CdS (67.5%). This is attributed to the larger specific surface area of the composite catalysts, which provides more active sites. Meanwhile, the loading of CdS obviously broadens the light response range of Cd-MOF and improves the utilization of visible light. The Mott-Schottky model experiment shows that the formed type-II heterojunction between Cd-MOF and CdS can effectively inhibit the recombination of photogenerated electrons and holes. Meanwhile, the photocurrent intensity of MOF/CdS-6 is 8 times and 2.5 times of that of pure Cd-MOF and CdS. In addition, MOF/CdS-6 showed good photocatalytic performance after five cycles, showing excellent stability and reusability.     

m‐Methoxy Substituents in a Tetraphenylethylene‐Based Hole‐Transport Material for Efficient Perovskite Solar Cells

Three tetrapheynlethylene derivatives (N,N‐di(4‐methoxyphenyl)aminophenyl‐substituted tetraphenylethylene; TPE‐4DPA) with different methoxy positions (pp‐, pm‐, and po‐) have been synthesized and characterized. The methoxy groups can control the oxidation potential of the materials, and the electronic properties of the derivatives were affected by the position of the methoxy substituents. These compounds were synthesized in a facile and cost‐effective way, and were applied as hole‐transport materials in perovskite solar cells. The corresponding cell performances were compared with respect to their structure modifications, and it was found that the derivative with m‐OMe substituents showed the highest power conversion efficiency (PCE) of 15.4 %, with a J_sc value of 20.04 mA cm^?2, a V_oc value of 1.07 V, and a fill factor (FF) value of 0.72, which is higher than the p‐OMe and o‐OMe substituents. Moreover, the PCE of pm‐TPE‐4DPA is comparable with that of the state‐of‐the‐art 2,2′,7,7′‐tetrakis(N,N′‐di‐p‐methoxyphenylamine)‐9,9′‐spirobifluorene under identical conditions.     

Intrinsic self‐initiating thermal ring‐opening polymerization of 1,3‐benzoxazines without the influence of impurities using very high purity crystals

A phenol/aniline type monofunctional benzoxazine monomer, PH‐a , is synthesized and highly purified to study the intrinsic thermal ring‐opening polymerization of benzoxazines without the influence of any impurity. The successful synthesis of the monomer and its corresponding chemical structure are confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. Purity of the compound is evaluated through differential scanning calorimetry (DSC) as well as elemental analysis (EA). Moreover, the thermal behavior of benzoxazine monomer toward polymerization is also studied by DSC, indicating that the highly purified benzoxazine monomer actually polymerize upon heating. The results present evidence of an intrinsic tendency for 1,3‐benzoxazines to undergo thermally induced ring‐opening polymerization upon heating only without any impurity participating during the reaction. This reveals that polybenzoxazines can be obtained by both the traditional thermally accelerated (or activated) polymerization, where impurities or purposefully added initiators are involved in the reaction; or, by the classic thermal polymerization, where only heat is enough to initiate the reaction. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3434–3445     

Synthesis and Anti-inflammatory Activity of a Novel Series of 9,10-Dihydro-4H,8H-chromeno[8,7-e][1,3]oxazin-4-one Derivatives

Flavonoids exhibit a wide range of biological activities including anti-inflammatory activity,while some 1,3-benzoxazine derivatives show anti-inflammatory activity.In order to explore the novel anti-inflammatory agents,based on the principles of bioisosterism and hybridization,ten novel chromeno[8,7-e][1,3]oxazin-4-ones were synthesized and characterized with IR,1H NMR,MS and elemental analyses.The anti-inflammatory activities of the target compounds were evaluated via the croton oil-induced ear oedema tes...     

Syntheses, Crystal Structures, and Antimicrobial Activities of 3-Bromo-N'-(2-chloro-5-nitrobenzylidene)benzohydrazide and 3-Bromo-N'-(4-nitrobenzylidene)benzohydrazide

Two new hydrazone compounds, 3-bromo-N'-(2-chloro-5-nitrobenzylidene)-ben- zohydrazide 1 and 3-bromo-N'-(4-nitrobenzylidene)benzohydrazide 2, have been synthesized and characterized by elemental analysis, IR spectra, <'1>H NMR, and single-crystal X-ray diffraction.Compound 1 crystallizes in monoclinie, space group P2<,1>/c with a = 7.7924(10), b = 24.490(3), c =7.8989(9)(A),β = 94.987(6)°, V = 1501.7(3)(A)<'3>, Z = 4, R = 0.0345 and wR = 0.0739. Compound 2 crystallizes in monoclinic, space group P2<,1>/c with a = 7.4099(11), b = 24.868(4), c = 8.3255(12)(A),β= 112.796(8)°, V= 1414.3(4)(A)<'3>, Z = 4, R = 0.0744 and wR = 0.1912. Both compounds display E configurations with respect to the C=N double bonds. In the crystal structure of 1, molecules are linked through N-H…N and N-H…O hydrogen bonds, forming chains running along the c axis. In the crystal structure of 2, molecules are linked through N-H…O hydrogen bonds, forming chains running along the c axis. The preliminary antimicrobial activities were studied.     

宝兴大理石矿的放射性检测

宝兴县境内的大理石资源以其白度高、储量丰、品质优、易开采而享誉中外。对四川省宝兴县陇东镇大理石矿区进行了放射性环境地质调查,通过对取回的大理石样品中226Ra、232Th、40K这3种核素的比活度的测定,根据比活度换算出这几种核素的外照射指数和内照射指数,把所得结果和中华人民共和国国家标准《建筑材料放射性核素限量》中规定的建筑性材料分类标准作对比后发现其内照射指数与外照射指数都符合《建筑材料放射性核素限量》中A类建筑材料和装饰材料的要求,它的产销与适用范围不受限制。     

Synthesis,antibacterial evaluation and survey on the thermophysical characteristics of novel medically applicable polyamides containing pharmaceutically outstanding triazole moieties

There are many different strategies to decrease the incidence of infection of medical device and food related containers. One way to prevent infection is by modifying the polymers used in making the devices and containers. Incorporation of antimicrobial agents in the bulk material or in formulations of medical devices production has been considered a viable alternative for systemic application of antibiotics. In this article, preparation of a series of triazole containing polymers, poly(triazole-amide-imide)s (PTAI)s and poly(triazole-amide) (PTA)s, and their monomers are reported. These polymers were readily soluble in a variety of organic solvents, showed significant thermal properties and also viscosities in the range of 0.55–0.66 dL/g. They have been tested against a range of Gram-positive and Gram-negative pathogens. The results indicated that these novel polymers containing triazole moiety in their repeating units can effectively control Gram-positive and negative pathogens and their physic-chemical properties besides their antibacterial characteristics make them unique candidate for using in the manufacturing of the medical devices.