End‐Group Characterization of Poly(acrylic acid) Prepared by Nitroxide‐Mediated Controlled Free‐Radical Polymerization

Summary: A low‐molar‐mass poly(acrylic acid) with a narrow molar‐mass distribution, prepared by SG1 nitroxide‐mediated controlled free‐radical polymerization, was subjected to end‐group analysis to confirm its living nature. ¹H and ³¹P NMR spectroscopy confirmed the presence of the SG1‐based alkoxyamine end group. Furthermore, chain extension with styrene and n‐butyl acrylate demonstrated the ability of the homopolymer to initiate the polymerization of a second block. These results open the door to the synthesis of poly(acrylic acid)‐based block copolymers by direct nitroxide‐mediated polymerization of acrylic acid.

Acrylic acid polymerization using an alkoxyamine initiator based on SG1 (N‐tert‐butyl‐N‐(1‐diethyl phosphono‐2,2‐dimethylpropyl) nitroxide resulting in a homopolymer capable of initiating the polymerization of a second block.     

Swelling of hydrophobically modified poly(acrylamide) and poly(acrylamide)-co-(acrylic acid) gels in surfactant solutions

A series of hydrophobically modified polyacrylamide and polyacrylamide-co-poly(acrylic acid) gels with systematically varying hydrophobicity were prepared by free-radical polymerization of acrylamide, n-alkylacrylamides (n = 10, 12, and 14), and acrylic acid. The swelling of these gels was examined in water and in both anionic and cationic surfactant solutions. It was found that the gels which incorporated acrylic acid showed extremely high swelling in water. Maximum swelling was observed in gels which incorporated 10 mol% acrylic acid. The swelling of these gels was much less in solutions of both anionic and cationic surfactants than in water. The gels which did not incorporate acrylic acid demonstrated little swelling in water, but showed increased swelling in both anionic and cationic surfactant solutions with increased hydrophobicity of the gel. Received: 1 February 1999 Accepted in revised form: 5 March 1999     

MMA／BA／AA／HEMA无皂乳液体系的合成与性能表征

本文采用分步控浊结合种子人聚的新方法合成了ＭＭＡ／ＢＡ／ＡＡ／ＨＥＭＡ无皂乳液体系,并对其粒径、耐水性以及贮存稳定性进行了研究。实验结果表明,该方法合成的无皂体系不仅固含量较高,反应稳定性和贮存稳定性较好,而且具有优良的耐水性。     

On-line monitoring of all-acrylic emulsion polymerization reactors by Raman spectroscopy

Fourier Transform Raman spectroscopy was used as an on-line sensor in order to monitor high solids content (50 wt%) n-BA/MMA emulsion copolymerization reactions. Due to the similarity of the chemical structure of the monomers, no separate bands could be detected for each monomer, and therefore a multivariate calibration technique was required (Partial Least Squares Regression, PLSR). Using experimental data from several semi-batch reactions independent PLSR models were built for the solids content, cumulative copolymer composition and unreacted amounts of n-BA and MMA. Those models were experimentally validated by monitoring reactions not used for calibration. It is demonstrated that FT-Raman spectroscopy can be successfully applied to on-line monitor emulsion polymerization reactors. This technique also shows a high potential for process control purposes because independent information about several molecular properties can be obtained from a single apparatus.     

TSC study and electro‐optical properties of epoxy/acrylic polymer‐dispersed liquid‐crystal film in DICY thermal cure

We report on the structures and electro‐optical properties of epoxy/acrylic polymer‐dispersed liquid‐crystal (PDLC) films. A thermal stimulated current (TSC) analysis was used to investigate the physical structures of PDLC. In the TSC spectrum of PDLC, three relaxation peaks were observed: the glass transition of the liquid crystal, the glass transition of the polymer matrix, and the ρ transition. The ρ transition represents the discharge behavior of space charges, and its intensity increased as the curing time and content of the curing agent dicyandiamide (DICY) increased. The pre‐UV‐cured films with different DICY contents were thermally cured at 130 °C for various periods. The electro‐optical properties of PDLC, such as the contrast ratio and switching voltage, increased as the curing time of DICY, the content of DICY, or both increased. As the ambient temperature increased from 10 to 40 °C, the contrast ratio and switching voltage of PDLC gradually decreased. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 507–514, 2001     

Solvent‐ and counterion‐specific swelling behavior of poly(acrylic acid) gels

The collapse of alkali metal poly(acrylate) (PAAM) gels was investigated for various water/organic solvent mixture systems: methanol (MeOH), ethanol (EtOH), 2‐propanol (2PrOH), t‐butanol (tBuOH), dimethyl sulfoxide (DMSO), acetonitrile (AcN), acetone, tetrahydrofuran (THF), and dioxane. In order to ascertain the counterion specificity in the swelling behavior, four kinds of alkali metal counterions were used: Li⁺, Na⁺, K⁺, and Cs⁺. Remarkable solvent and counterion specificities were observed for every counterion species and every solvent system, respectively. For example, in aqueous EtOH the dielectric constants (D_cr) at which collapse occurred were in the order PAACs < PAALi < PAAK < PAANa. On the other hand, the D_cr at which PAALi gel collapsed increased in the order tBuOH < dioxane < THF < MeOH < 2PrOH < EtOH < acetone < AcN < DMSO, where the D_cr ranged from about 39 to about 67. This was in contrast to our previous observation for a partially quaternized poly(4‐vinyl pyridine) (P4VP) gel, which collapsed in a much narrower D_cr region in similar mixed solvents. The present solvent‐ and counterion‐specific collapses are discussed on the basis of solvent properties such as the dielectric constant and Gutmann's donor number and acceptor number of a pure solvent. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2791–2800, 2000     

Water-soluble polymers. 71. pH responsive behavior of terpolymers of sodium acrylate,acrylamide, and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio)butanoate

Terpolymers of sodium acrylate (NaA), acrylamide (AM), and the zwitterionic monomer 4-(2-acrylamido-2-methylpropanedimethylammonio) butanoate (AMPDAB) were prepared by the free radical polymerization in 0.5M NaBr aqueous solution using potassium persulfate as the initiator. The feed ratio of AMPDAB : NaA : AM was varied from 5 : 5 : 90 to 40 : 40 : 20 mol %, with the total monomer concentration held constant at 0.45M. Terpolymer compositions were determined by ¹³C NMR. Molecular weights varied from 3.0 × 10⁵ to 9.7 × 10⁶ g/mol. All terpolymers were soluble in deionized water and salt solutions at all pH values. The dilute and semidilute solution behavior of the terpolymers was studied as a function of composition, pH, and added electrolytes. Polyelectrolyte behavior was observed for all terpolymers at pH 8.5, as evidenced by high viscosity values at low polymer concentrations and viscosity decrease in the presence of added electrolytes. The reduced viscosity as a function of decreasing pH exhibits a minimum as the terpolymer undergoes a polyanion/polyzwitterion/polycation transition. Comparison of the solution behavior of the terpolymers to terpolymers of 3-(2-acrylamido-2-methylpropane dimethylammonio)-1-propane sulfonate (AMPDAPS), AM, and NaA (AADAPS series) as well as copolymers of AMPDAB and AM (AMPDAB series) have been made. © 1997 John Wiley & Sons, Inc.     

FTIR studies of conformational energies of poly(acrylic acid) in cast films

Fourier transform infrared (FTIR) spectroscopic measurements have been undertaken to estimate the conformational energies of poly(acrylic acid) (PAA) cast films in the temperature range of 40–130°C. The temperature dependence of the IR spectra in the C=O stretching region has been analyzed to yield the side-chain and backbone conformational energies. The estimated energies are close to those previously obtained by polarized Raman spectroscopic measurements for PAA solutions. Combining the FTIR value of conformational energy with the simplified rotational isomeric state (RIS) model proposed in the Raman analysis provides a persistence length in accordance with earlier SAXS experiments. The data also agree with the Gibbs-DiMarzio predictions, further substantiating the validity of the analysis. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys, 35: 507–515, 1997     

Ionic absorption of polypropylene functionalized by surface grafting and reactions

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene fibers and the subsequent reactions of the grafted carboxylic groups are reported. The extents of grafting was controlled by the plasma conditions. Reactions of the carboxylic acid with selected amines resulted in ion-exchanging and chelating functionalities. In general, ion adsorption is enhanced by higher levels of grafting and by raising temperature during adsorption. The adsorption level and preferences among ions of these functionalized fibers depend on the structure of the functional groups, i.e., the structure of the spacer and terminal groups. The carboxylic acid groups of the PP-g-AA fibers which behave like weakly acidic ion-exchangers are attributed to the low metal ion adsorption and the lack of ion preference. The F1 fibers with flexible  CH₂CH₂ spacer and small terminal  OH in the functional group exhibits highest ion adsorption among all functionalized fibers studied here. With benzene spacers, metal adsorption can be enchanced by the electron-donating nature of the terminal group. With the same ester end group in the functional structure, F3 fibers which contain benzene ring spacers show higher ion adsorption than F4 and F5 which have CH₂ and NH spacers, respectively. The ion preference and adsorption ability of the functionalized fibers, i.e., equilibrium binding constants (K_b) and saturation constants (K_s) derived from adsorption isotherms, also depend on the functional group structures. K_b increases with increasing grafting yield, increasing the electron donor atom in either terminal bonds or spacer, and reducing the steric hindrance of spacer. The K_s values are affected by the accessibility of functional groups, the size of spacer, and the terminal group structure. © 1997 John Wiley & Sons, Inc.     

Kinetics of Ag+ contained polymeric complex membranes for facilitated olefin transport

The reactions of silver ion complexes with polyethylene-graft-poly(acrylic acid) (PE-g-AA) and the olefin reversible coordinates with the PE-g-AA–Ag⁺ complex membranes were studied. Infrared and nuclear magnetic resonance spectra confirmed the complex formation between the carboxylic acid of the PE-g-AA and the Ag⁺ ion. Also, the Ag⁺ ion in PE-g-AA-Ag⁺ membrane was assumed to be a fixed carrier that adsorbs and transports olefin, thereby causing a selective olefin/paraffin separation. A theoretical model of the PE-g-AA-Ag⁺ (olefin) complex was proposed. The coordination number of Ag⁺ ion binding to the carboxylic acid of PE-g-AA is about 1.6 in glycerol solution. The coordination number of olefin binding to the Ag⁺ in the PE-g-AA–Ag⁺ complex membrane is 1. Moreover, the kinetics of olefin binding to the PE-g-AA–Ag⁺ complex membranes were studied. The equilibrium, association, and dissociation constants were also presented. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 909–917, 1997