Investigation of the behavior of arenediazonium salts with olefins in BmimPF6

The palladium-catalyzed reactions of olefins with arenediazonium salts in ionic liquids were investigated. For methyl acrylate and methyl acrylonitrile, normal Heck cross-coupling products are obtained in good yields. However, highly selective dimerization products are formed in excellent yields for styrenes. The catalyst system can be recycled.     

Determination of ammonia based on the electro-oxidation of hydroquinone in dimethylformamide or in the room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

The results detail a novel methodology for the electrochemical determination of ammonia based on its interaction with hydroquinone in DMF. It has been shown that ammonia reversibly removes protons from the hydroquinone molecules, thus facilitating the oxidative process with the emergence of a new wave at less positive potentials. The analytical utility of the proposed methodology has been examined with a linear range from 10 to 95 ppm and corresponding limit-of-detection of 4.2 ppm achievable. Finally, the response of hydroquinone in the presence of ammonia has been examined in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluormethylsulfonyl)imide, [EMIM][N(Tf)₂]. Analogous voltammetric waveshapes to that observed in DMF were obtained, thereby confirming the viability of the method in either DMF or [EMIM][N(Tf)₂] as solvent.     

凝胶型聚合物电解质的电导率与温度的关系

凝胶型聚合物电解质的电导率与温度的关系孙晓光，林云青，齐力，景遐斌，王佛松（中国科学院长春应用化学研究所长春１３００２２）关键词凝胶电解质，离子电导率，活化能无定形聚合物电解质电导与温度的依赖关系一般可用Ｖｏｇｅｌ－Ｔａｍｍａｎ－Ｆｕｌｃｈｅｒｃ（Ｖ...     

Study of the absorption spectra and ionic equilibria of cationic-anionic polymethine dyes

The absorption spectra of a number of cationic-anionic polymethine dyes in polar, low-polarity, and nonpolar solvents were studied. It was established that in polar solvents the absorption spectra represent the sum of the absorption spectra of the cation and anion, whereas in nonpolar and low-polarity solvents, in many cases the appearance of a short-wave absorption band is observed, due to interaction of the chromophores of the cation and anion in ion pairs. In solvents of intermediate polarity (for example, in chloroform and ethyl acetate), a concentration dependence of the absorption spectra is observed, determined by the equilibria of ionic dissociation. The ionic dissociation constants of a number of cationic-anionic dyes in chloroform and ethyl acetate were determined by a conductometric method. The thermodynamic data obtained are compared with the spectral data.N. N. Semenov Institute of Chemical Physics, Russian Academy of Sciences, 117977 Moscow. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 11, pp. 2524–2532, November, 1992.     

Hydroselenation of alkynes using NaBH4/BMIMBF4: easy access to vinyl selenides

A general and easy method for the synthesis of several vinyl selenides using NaBH₄ and BMIMBF₄ as a recyclable solvent is described. This efficient and improved method furnishes the corresponding vinyl chalcogenides preferentially with Z configuration. We also observed that when the same protocol was applied to phenyl acetylene, (E)-bis-phenylseleno styrene was obtained in good yield and with high selectivity.     

Utilisation of 1,3-dialkylimidazolium-2-carboxylates as CO2-carriers in the presence of Na and K: application in the synthesis of carboxylates, monomethylcarbonate anions and halogen-free ionic liquids

1,3-Dialkylimidazolium-2-carboxylate compounds have recently been fully characterised. Here we describe the utilisation of 1,3-dimethyl (1a) and 1-butyl-3-methyl-imidazolium-2-carboxylate (1b) in a carboxylation reaction with transfer of the CO₂ moiety to benzoylacetone and methanol for the synthesis, in high yield, of benzoylacetate and monoalkylcarbonate anions, respectively. Conversely, when compounds 1a and b are reacted with carbonylic substrates lacking C-H active bonds, a product resulting from nucleophilic attack of the 1,3-dialkylimidazol-2-ylidene species on the carbonyl moiety is obtained. The reported reactions can find applications in organic synthesis and in the synthesis of halogen-free ionic liquids.     

Electrospray ionization mass spectrometry of ionic liquids and determination of their solubility in water

Electrospray ionization mass spectrometry is used to detect both the cations (C⁺) and the anions (A^–) of ionic liquids (CA). In this study, the ionic liquids are diluted with aqueous methanol before injection. In addition to the main peaks of the parent ions, fragmentation products are observed upon increasing the cone voltage, whereas aggregates of the parent ion with one or more ionic liquid molecules (e.g., C(CA)_n⁺, A(CA)_n^–) are observed upon decreasing the cone voltage. The ions of several ionic liquids in a mixture are also detected and the ratios of their concentrations estimated. A method is developed to determine quantitatively the concentration of an ionic liquid in solution by using the cation and anion of another ionic liquid as internal standards. By using this method, the solubilities in water at room temperature (22±1 °C) of three typical hydrophobic ionic liquids have been determined: 0.70±0.08 g L^–1 for methyltributylammonium bis(trifluoromethylsulfonyl)imide (MeBu₃NNTf₂), 6.0±0.5 g L^–1 for butylmethylpyrrolidinium bis(trifluoromethylsulfonyl)imide (BuMePyrNTf₂), and 18.6±0.7 g L^–1 for 1-butyl-3-methylimidazolium hexafluorophosphate (BMIPF₆).     

Mercury extraction by ionic liquids: temperature and alkyl chain length effect

The preliminary results described here show the complete transfer of Hg(II) ions, in the absence of a chelating agent in 1-alkyl-3-methylimidazolium hexafluorophosphate ionic liquids; the lag time required to gain the quantitative metal ion partition turned out to be strongly dependent both on alkyl chain length on the imidazolium ring and on the working temperature.     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl6

Metathesis of hex-1-ene in ionic liquids catalyzed by WCl₆ was studied. The metathesis is preceded by isomerization of hex-1-ene to hex-2-ene, from which the main reaction product, viz., oct-4-ene, is derived. The WCl₆-1-butyl-3-methylimidazolium tetrafluoroborate (BMIM·BF₄) system efficiently catalyzes metathesis of linear olefin, the ionic liquid serving as the reaction medium by forming a stable homogeneous catalytic system with WCl₆. The yields of the metathesis products increase with increasing reaction temperature. The addition of tin-containing promoters leads to a substantial increase in the reaction rate. In the WCl₆-BMIM·BF₄-SnBu₄ system, the selectivity of the formation of oct-4-ene is significantly enhanced.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2094–2097, October, 2004.