Running buffers for determination of chromium(VI)/(III), cobalt(II) and zinc(II) in complex matrices by capillary electrophoresis with contactless conductivity detection

Complex matrices and rather high acidity in environmental samples are often the impelling challenges for the used running buffers of capillary electrophoresis. Twelve binary acid-base buffers were evaluated for separation of Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ in a sample containing various salts by capillary electrophoresis with contactless conductivity detector. The malic acid (MA) systems including MA-His (histidine), MA-Arg (arginine) and MA-Tris (tris(hydroxymethyl)aminomethane) were selected as the candidates with powerful separation efficiency and good response sensitivity. In the MA-Tris buffer, optimization were further carried out in terms of the pH value and the concentration of MA, and the optimal conditions were obtained as 6 mM MA-Tris and 2 mM 18-crown-6 at pH 3.5. Furthermore, a real application was demonstrated by analyzing the plating rinse water (pH 0.8), in which the Ca²⁺, Na⁺, Cr(VI)/Cr(III), Co²⁺ and Zn²⁺ were all detected by adjusting at pH 3.5 with 5% (v/v) diluent ammonia. Both the cations, e.g., K⁺, Ca²⁺, Na⁺, Mg²⁺, and the common high concentration anions in the sample, e.g., Cl⁻, SO₄²⁻ and NO₃⁻ did not cause any disturbance to the concerned analytes.     

高血压类风湿症疗效与锌,钙关系初探

以临床典型病案为例，探讨了中医中药传统理论和现代微量元素研究的关系，重点讨论了向量元素锌、宏量元素钙与高血压、风湿症的病因病机和治疗关系。     

二十元环超大孔磷酸亚磷酸锌锰的合成与结构

本文以1,3-环己二甲胺[1,3-Cyclohexanebis(methylamine), CHBMA]为模板剂, 采用水热法合成了微孔磷酸亚磷酸锌锰 [H2CHBMA][Zn1.5Mn(HPO3)2(PO4)]·H2O(命名为TJPU-3Mn), 单晶结构解析显示该化合物为首个与超大孔磷酸铝JDF-20具有相同拓扑结构的微孔晶体, 沿c方向具有二十元环超大孔道, 孔道中的CHBMA分子均为顺式构象, 有望用于分离和识别CHBMA异构体.     

Retention, kinetics and thermodynamics profile of cadmium adsorption from iodide medium onto polyurethane foam and its separation from zinc bulk

The sorption behaviour of 2.5 × 10⁻⁵ M solution of Cd(II) on polyurethane foam (PUF) from iodide medium have been investigated. The conditions were optimized from aqueous solutions of different pH (1-10) and of acids of varied concentration (0.01-1.0 M). The maximum concentration of KI was found to be 0.24 M and equilibration time was established to be 20 min. The data successfully followed the Freundlich and Dubinin-Radushkevich (D-R) isotherms at low metal ion concentration while Langmuir isotherm followed at higher metal ion concentration. The Freundlich parameter 1/n = 0.66 ± 0.02 have been evaluated whereas D-R isotherm yields the sorption free energy E = 10.5 ± 0.1 kJ mol⁻¹ indicating ion exchange type chemisorption. The monolayer coverage (XL) constant of Langmuir isotherm was found to be 23.7 ± 0.4 mg g⁻¹. The numerical values of thermodynamics parameters enthalpy (ΔH), entropy (ΔS) and Gibbs free energy (ΔG) indicated the endothermic and spontaneous nature of sorption. The Scatchard plot analysis was tested to evaluate the binding sites of the PUF and stability constants of sorption were determined. On the basis of these parameters, the sorption mechanism was discussed. Among the foreign ions tested, Pb(II), Hg(II), cyanide and nitrite should be absent. The clean separation of Cd(II) from Zn(II) ions in the ratio 1:250, respectively, was achieved by column chromatography.     

Zinc-catalyzed Williamson ether synthesis in the absence of base

Zinc powder was found to be a highly efficient catalyst for the synthesis of aromatic ethers using microwave heating in the presence of N,N-dimethylformamide as well as under stirring in an oil-bath using tetrahydrofuran as solvent without any inorganic base. This method can be used for selective mono-, di- or tri-O-alkylations.     

微量元素锌促进儿童生长发育临床研究

报道以微量元素锌治疗缺锌患儿１１８例并与１１４例作对照观察．结果发现，衡量生长发育与营养的敏感指标：身高、体重、血清白蛋白及血色素等参数，治疗组比对照组都显著提高（Ｐ值＜０．０１）．证明锌制剂对缺锌儿童有显著的促进生长发育及改善营养状态作用，作者并对锌的作用机理作了论述．     

Zinc(II) and Cadmium(II) Complexes of the 3‐(2‐Pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) Ligand,Structural Studies of [Zn(PDPT)2Cl(ClO4)] and [Cd(PDPT)2(NO3)(ClO4)]

Two new mixed‐anion zinc(II) and cadmium(II) complexes of 3‐(2‐pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) ligand, [Zn(PDPT)₂Cl(ClO₄)] and [Cd(PDPT)₂(NO₃)(ClO₄)], have been synthesized and characterized by elemental analysis, IR‐ and ¹H NMR spectroscopy. The single crystal X‐ray analyses show that the coordination number in these complexes is six with four N‐donor atoms from two “PDPT” ligand and two of the anionic ligands, ZnN₄ClO_perchlorate, CdN₄O_nitrateO_perchlorate. Self‐assembly of these compounds in the solid state via π–π‐stacking interactions is discussed.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Phosphaniminato-Komplexe von Cobalt und Zink mit Heterocubanstruktur. Die Kristallstrukturen von [CoI(NPMe3)]4 und [ZnI(NPMe3)]4

Phosphoraneiminato Complexes of Cobalt and Zinc with Heterocubane Structure. Crystal Structures of [CoI(NPMe₃)]₄ and [ZnI(NPMe₃)]₄ The title compounds have been prepared from CoI₂ and ZnI₂, respectively, and Me₃SiNPMe₃ by fusion reactions at 180°C in the presence of sodium fluoride. They crystallize from dichloromethane as dark green (Co) or colourless (Zn) single crystals including three molecules CH₂Cl₂ per formula unit, which were characterized by crystal structure determinations. [CoI(NPMe₃)]₄ · 3 CH₂Cl₂: Space group P3m1, Z = 2, structure solution with 2376 independent reflections, R = 0.033. Lattice dimensions at ?50°C: a = b = 1455.8, c = 1270.5 pm. [ZnI(NPMe₃)]₄ · 3 CH₂Cl₂: Space group P3m1, Z = 2, structure solution with 2197 independent reflections, R = 0.043. Lattice dimensions at ?60°C: a = b = 1454.9, c = 1270.5 pm. Both complexes are isostructural with one another. They form heterocubane structures in which the metal atoms are linked via μ₃-N-bridges of the phosphoraneiminato groups with M₄N₄ bridge-type bond angles close to 90°.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.