Synthesis and kinetics of polymerization of unsaturated monomers with OH groups in their structure: I.3-hydroxyneopentyl acrylate

The synthesis of new unsaturated monomers containing functional groups has been theoretically analyzed by considering a simple kinetic scheme. In the reactions between acetyl and acryloyl chloride with neopentylglycol, it was shown that the comparison between theoretical and experimental results, does not allow us to conclude that the two rate constants controlling the reactions are equivalent. Kinetic experiments of the polymerization of 3-hydroxyneopentyl acrylate were carried out in benzene and 1,4-dioxane solution at different temperatures. Dilatometric techniques and nonlinear least-squares methods were used to obtain kinetic data and to determine the kinetic constants, respectively. The values of $k_p /k_t^{1/2}$ for this monomer were found higher in dioxane than in benzene due, probably, to the fact that in the last solvent the polymerization is heterogeneous. The activation energy, determined by using different values of $k_p /k_t^{1/2}$ was found 7.6 kcal/mol. The stereostructure of the polymers derived from 3-hydroxyneopentyl acrylate and 3-acetoxyneopentyl acrylate was determined by ¹³C-NMR spectroscopy from the analysis of the resonance signals belonging to the carbonyl groups, obtaining values for the fraction of isotactic dyads in the range 0.36 ± 0.03 for both polymers. Finally, the glass transition temperatures of both polymers, determined calorimetrically, were found 281 and 255 K, respectively. © 1994 John Wiley & Sons, Inc.     

乳液体系中的RAFT可控/活性自由基聚合研究进展

可逆加成-断裂链转移聚合(RAFT)是新近发展起来的可控/活性自由基聚合方法。由于该方法具有适用单体范围广、反应条件温和、可采用多种聚合实施方法等优点,已成为一种有效的分子设计手段。本文总结了近几年文献报道的在乳液和细乳液体系中实施RAFT聚合反应的研究进展,对非均相体系的稳定性、聚合反应过程中的动力学特点、以及聚合产物的分子量及其分布等方面的研究进行了综述。     

Electrochemical Response of Cobalt(II) in the Presence of Ammonia

The electrochemical oxidation of cobalt(II) at gold, boron‐doped diamond, basal and edge plane pyrolytic graphite, and highly oriented pyrolytic graphite electrodes in aqueous solutions containing NH₃ has been studied using cyclic voltammetry, with subsequent chemical and electrochemical processes explained in detail. Furthermore, the electro‐reduction of [Co(NH₃)₆]³⁺ in the presence of different electrolytes has also been studied to obtain a better understanding of the oxidation pathway of the Co(II)‐ammine complexes. In aqueous solution the mechanism can be described by the following scheme:     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper, ring-opening polymerization of trimethylene carbonate (TMC) with rare earth (Nd, Y, La) p-tert-butylcalix[n]arene (n=4, 6, and 8) complexes as catalysts has been studied. Poly(trimethylene carbonate) (PTMC) with Mv of 21,400 was produced by bulk polymerization under the conditions as follows: [TMC]0/[Nd] (molar ratio)=1000,80℃,8h. Mechanism study reveals that the polymerization proceeds via a coordination mechanism.     

Formation of SnO2 Nanoparticles on External Surface of NaY Zeolite

Tin dioxide nanoparticles of 5 nm in size were prepared on NaY zeolite external surface by impregnation of SnCl2 solution and subsequent calcination at 623 K. A SnO2-NaY based chemical sensor for detecting H2 was demonstrated.     

Microgel-based engineered nanostructures and their applicability with template-directed layer-by-layer polyelectrolyte assembly in protein encapsulation

A novel strategy for the fabrication of microcapsules is elaborated by employing biomacromolecules and a dissolvable template. Calcium carbonate (CaCO(3)) microparticles were used as sacrificial templates for the two-step deposition of polyelectrolyte coatings by surface controlled precipitation (SCP) followed by the layer-by-layer (LbL) adsorption technique to form capsule shells. When sodium alginate was used for inner shell assembly, template decomposition with an acid resulted in simultaneous formation of microgel-like structures due to calcium ion-induced gelation. An extraction of the calcium after further LbL treatment resulted in microcapsules filled with the biopolymer. The hollow as well as the polymer-filled polyelectrolyte capsules were characterized using confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), and scanning force microscopy (SFM). The results demonstrated multiple functionalities of the CaCO(3) core - as supporting template, porous core for increased polymer accommodation/immobilization, and as a source of shell-hardening material. The LbL treatment of the core-inner shell assembly resulted in further surface stabilization of the capsule wall and supplementation of a nanostructured diffusion barrier for encapsulated material. The polymer forming the inner shell governs the chemistry of the capsule interior and could be engineered to obtain a matrix for protein/drug encapsulation or immobilization. The outer shell could be used to precisely tune the properties of the capsule wall and exterior. [Diagram: see text] Confocal laser scanning microscopy (CLSM) image of microcapsules (insert is after treating with rhodamine 6G to stain the capsule wall).     

Chemically Sensitive Field‐Effect Transistors and Chemiresistors: New Materials and Device Structures

Electronic sensor technology remains of widespread and intense interest. There are compelling needs to detect chemical species ranging from small molecules dispersed in the gas phase to complex biopolymers in aqueous solution. This review describes some recent advances in three main areas: chemically sensitive resistors (chemiresistors, CRs) including inorganic and organic based devices, field effect transistors (FETs) with semiconducting layers and/or gates with chemical sensitivity, and sensors based on the differential conductivity of nanotubes and nanowires. Results reported in the last two to three years are emphasized, highlighting some current trends in the development of sensors for applications such as diagnostics, process monitoring, and security.     

高分子量的枝状聚硅烷的合成与表征

根据硅氢加成反应机理设计了“顺点滴式”工艺 ,高效、低耗地合成了甲基苯乙基二氯硅烷和甲基正己基二氯硅烷 .根据Wurtz还原偶联反应原理 ,采用“预聚”和“混聚”两种工艺分别合成枝状共聚硅烷 ,发现运用“预聚”工艺可以合成分子量很高的枝状聚硅烷 .     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.