Time-resolved synchrotron X-ray study of crystalline phase transition in poly(aryl ether ketone ketone) containing alternated terephthalic/isophthalic moieties

Unique crystallization and melting behavior in poly(aryl ether ketone ketone) containing alternated terephthalic and isophthalic moieties were studied by time-resolved synchrotron x-ray methods. Recently, this material has been shown to exhibit three polymorphs (forms I, II, and III). In this work, we further investigated their distinctive thermal properties and found that form I is the dominating and the most thermally stable phase while form II is favored by fast nucleation conditions and is the least stable phase. On the other hand, form III represents a minor intermediate phase that usually coexists with form I and can be transferred from form II and to form I. Structural and morphological changes in form I have been followed by simultaneous wide-angle x-ray diffraction (WAXD)/small-angle x-ray scattering (SAXS) measurements during cold- or melt-crystallization and subsequent melting. In all cases, a larger dimensional change was found in the crystallographic a-axis than the b-axis during heating and cooling. This may be due to the greater lateral stress variation with respect to temperature along the a direction of the primary lamellae which is induced by either the formation of secondary lamellae or the preferential chain-folding direction in poly(aryl ether ketone ketone)s. During the phase transitions of form II ← III in the cold-crystallized specimen and form III ← I in the melt-crystallized samples, lamellar variables (long period, lamellar thickness, and invariant) obtained from SAXS remain almost constant. This indicates that the density distribution in the long spacing is independent of the melting in form II or III. For melt-crystallization, the corresponding changes in unit-cell dimensions and lamellar morphology during the annealing-induced low endotherm are most consistent with the argument that these changes are due to the melting of thin lamellar population. © 1995 John Wiley & Sons, Inc.     

Structural characterization of polypyrrole in the solid state by high resolution 15N NMR spectroscopy [II]

The solid-state ¹⁵N CP/MAS NMR spectra and ¹⁵N spin-lattice relaxation times (T₁) of doped and dedoped ¹⁵N-labeled polypyrroles prepared by electrochemical polymerization, have been measured by means of high-resolution solid-state ¹⁵N NMR. The ¹⁵N signal of polypyrrole consists of four peaks decomposed by line shape analysis. The four peaks obtained have been assigned to the various structures of polypyrrole. Further, the half-width of the ¹⁵N NMR spectra of polypyrroles is discussed as related to the electrical conductivity. © 1995 John Wiley & Sons, Inc.     

用相位调制方法测量光盘盘基应力双折射的精度分析

偏振相位调制方法是测量微小双折射的一种高精度检测方法。本文系统全面地分析了以ＰＭＣＳＡ结构形式测量光盘盘基应力双折射的相位调制方法中，由各种误差源造成的对测试结果的影响。     

A Note on Geometric Structures of Linear Ordered Orthogonal Arrays and (T,M,S)-Nets of Low Strength

The equivalent geometrical configurations of linear ordered orthogonal arrays are determined when their strengths are 3 and 4. Existence of such geometrical configurations is investigated. They are also useful in the study of (T, M, S)-nets.     

Linear and Nonlinear Optical Properties Of Racemic (±)2-(α-Methylbenzylamino)-5-Nitropyridine Single Crystals

Linear and nonlinear optical properties of racemic (±)2-(α-methylbenzylamino)-5-nitropyridine ((±)MBANP) single crystals have been comprehensively investigated and compared with those of the enantiomorph (–)2-(α-methylbenzylamino)-5-nitropyridine ((–)MBANP) crystals. (±)MBANP crystal exhibits very high chemical and physical stability, but relatively small nonlinear optical coefficients (d₃₁ = 6.8 pm/V, d₃₂ = 4.7 pm/V, d₃₃ = 0.84 pm/V). A comparison between the nonlinear optical coefficients of (±)MBANP and (–)MBANP demonstrates the validity of the oriented-gas model in molecular crystals that neglects all the contributions from intermolecular interaction.     

A Study of Protein and Glycoprotein Syntheses in Pre-implantation Mouse Embryos Using Mini-2D-Electrophoresis, Video Densitometer Scanning and Computer-Image Analysis

In the present study, proteins and glycoproteins of mouse embryos at 2-cell,morula and blastocyst stages were analyzed.The techniques of ~(35)S-Met incorporation,ConA antiserum-precipitating ConA-binding proteins, mini-2D-electrophoresis, fluorography,video densitometer scanning and the computer-lmage system were used for analyses.Results of the investigations indicated that proteins and glycoproteins were synthesized by the embryos in a gradual increase manner from 2-cell to blastocyst. A relatively large amount of glycoproteins was synthesized during the morula and blastocyst stages.Two specific small glycoproteins respectively with molecular weights about 6500 and 9000 and PIs at 5.0 and 6.5 were apparently synthesized in the blastocyst but not in the 2-cell or the morula.     

On practical metrology and chemical analysis: etalons and traceability systems

 National measurement systems are infrastructures to ensure, for each nation, a consistent and internationally recognised basis for measurement. Such complex systems have historical, technical, legal, organisational and institutional aspects to connect scientific metrology with practical measurements. Underlying any valid measurement is a chain of comparisons linking the measurement to an accepted standard. The ways the links are forged and the etalons (measurement standards) to which they connect are defining characteristics of all measurement systems. This is often referred to as traceability which aims at basing measurements in common measurement units – a key issue for the integration of quantitative chemical analysis with the evolving physical and engineering measurement systems. Adequate traceability and metrological control make possible new technical capabilities and new levels of quality assurance and confidence by users in the accuracy and integrity of quantitative analytical results. Traceability for chemical measurements is difficult to achieve and harder to demonstrate. The supply of appropriate etalons is critical to the development of metrology systems for chemical analysis. An approach is suggested that involves the development of networks of specialised reference laboratories able to make matrix-independent reference measurements on submitted samples, which may then be used as reference materials by an originating laboratory using its practical measurement procedures. Received: 31 July 1995 Accepted: 19 August 1995     

Measurement of storage time, estimation of ion number and study of absorption line profile in a Paul trap

Europium (Eu⁺) ions were confined in a Paul trap and detected by non-destructive method. Storage time of Eu⁺ ions achieved in vacuum was improved by orders of magnitude employing buffer gas cooling. The experimentally detected signal was fitted to the ion response signal and the total number of ions trapped was estimated. It is found that the peak signal amplitude as well as the product of FWHM and the peak signal amplitude is proportional to the total number of trapped ions. The trapped ion secular frequency was swept at different rates and its effect on the absorption line profile was studied both experimentally and theoretically.     

Efficiency and effectiveness of Spanish football teams: a three-stage-DEA approach

In this paper, we apply a three-stage-DEA model to the Spanish Professional Football League, which means separating the teams’ economic behaviour into three components: operating efficiency—of the offence and defence—athletic or operating effectiveness, and social effectiveness. The results showed that the technical inefficiency of the defence is greater than that of the offence, both being caused by aspects linked to the poor management of players’ abilities and by the football team’s size. Teams showed a favourable evolution of their offensive and defensive efficiency during the 2004/2005 season and to a lesser extent in the season before. The point system assigned by the professional football league regulations evaluates the teams’ athletic effectiveness, but we detected that the teams with the most experience perform athletically in a more effective manner. Their social effectiveness is strongly related to the level of play in itself and to factors linked to their PFL ranking: participation in international competitions for important football teams; or the struggle of minor football teams to stay in the first division.     

Poly(L‐lysine) and clay nanocomposite with desired matrix secondary structure: Effects of polypeptide molecular weight

Nanocomposites (NC) were formed using cationic poly(L ‐lysine) (PLL), a semicrystalline polypeptide, that was reinforced by sodium montmorillonite (MMT) clay via solution intercalation technique. By varying solution conditions such as pH, temperature, and polypeptide concentration in the presence of clay platelets, the secondary structure of PLL was controllably altered into α‐helical, β‐sheet, and random coil. The high molecular weight polypeptide shows a strong propensity to fold into the β‐sheet structure when cast as films, irrespective of the initial secondary structure in solution. Nanocomposite local morphology confirms intercalated MMT platelets with PLL over a wide range of compositions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 239–252, 2007.