配位聚合物{[MnL][FeⅡFeⅢ(ox)3·1.5H2O]}∞的合成及其磁学性质

合成和表征了一种新的Schiff碱配合物MnL(ClO4)*3H2O(1)(其中L为n(水杨醛)∶n(二乙撑三胺)=1∶1缩合而成的Schiff碱).1与FeSO4*7H2O和K3[Fe(ox)3]*3H2O(ox=oxalate)进一步反应,生成了双金属层状配位聚合物{[MnL][FeⅡFeⅢ(ox)3]*1.5H2O}∞(2).IR和Mssbauer谱测定结果表明,2具有二维层状结构,其阴离子层由[FeⅡFeⅢ(ox)3]-单元构成.变温磁化率(5K～100K)测试结果表明,2中的自旋载体之间存在反铁磁交换作用.5K时的磁滞现象表明2在低温时可能存在铁磁有序,这可能是亚铁磁或自旋倾斜造成的.     

镝(III)与酰腙及1,10菲啰啉多元配合物的晶体结构及荧光性质

在水乙醇混合体系中 ,首次得到 2 羰基丙酸水杨酰腙 (C10 H10 N2 O4) ,1,10 菲啉 (C12 H8N2 ,简写作phen)与Dy(NO3 ) 3 ·3H2 O的配合物 [Dy(C10 H8N2 O4) (phen) (NO3 ) (H2 O) 2 ]·H2 O .该配合物属单斜晶系 ,空间群为P2 1/c,晶胞参数a =1 5 2 4( 3 )nm ,b =1 10 18( 19)nm ,c =1 468( 3 )nm ,β =92 2 8( 2 )° ,V =2 4 63 ( 7)nm3 ,Z =4,μ =3 10 0mm-1,Dc=1 83 1g/cm3 ,F( 0 0 0 ) =13 40 ,R =0 0 3 14 ,wR =0 0 660 ,GOF =0 966.测试结果表明 ,该单晶结构为镝的 9配位配合物 ,其中一个 2 羰基丙酸水杨酰腙分子以羧基氧、酰胺基中的羰基氧和CN中的氮与Dy3 + 三齿配位 ,形成两个稳定的共边五元环 ,一个 1,10 菲啉分子以二齿方式配位、一个硝酸根和两个水分子也同时参与配位 ,在空间呈扭曲的单帽四方反棱柱 ,而在配合物周围还有一个游离的水分子 .发光性能测试表明配合物具有很好的荧光性能     

低分子量聚合物电解质的合成与性能

研究了低分子量梳状聚合物电解质的合成方法及结构，性能。首先合成了不同分子量的甲基丙烯酸聚乙二醇单甲醚酯，并进一步合成了分子量一万左右的梳状聚合物电解质，结果表明：反应严格按照反应方程进行，精制产物是非晶的梳状聚合物，本聚合物体系均存在两个玻璃化转变温度，一个在100℃左右，归属为梳状聚合物主链的玻璃化转变，另一个在－20摄氏度以下，归属于侧链玻璃化转变，在室温下侧链可以运动，有利于电活性物质的迁移和扩散，并用超微电极研究了该电解质的行为。     

含茂基、烷氧墓及乙酰氧基混合配位镧系金属有机化合物的合成及表征

本文通过二茂基镧系金属氯化物Ｃｐ２ＬｎＣｌ（Ｃｐ＝Ｃ５Ｈ５；Ｌｎ＝Ｄｙ，Ｈｏ，Ｙｂ）与等摩尔的ＮａＯＡｃ（Ａｃ＝ＣＨ３ＣＯ）及烷基醇ＨＯＲ（Ｒ＝－ＣＨ２ＣＨ２ＣＨ３，－ＣＨ２ＣＨ—ＣＨ２）在四氢呋喃溶剂中混合一步反应，合成了六种新的含三种不同配位基的镧系金属有机化合物．化合物的元素分析结果符合通式ＣＰＬｎ（ＯＲ）（ＯＡｃ），红外光谱显示了η５－ＣＰ、ＯＲ及ＯＡｃ基团的特征吸收峰，质谱显示了化合物的三聚碎片离子峰．基于元素分析、红外光谱及质谱数据，建议化合物可能为三聚体结构，即：［ＣｐＬｎ（ＯＲ）（ＯＡｃ）］３．     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

Synthesis of Fullerene-end Functionalized Poly（methyl methacrylate） via Reverse Atom Transfer Radical Polymerization

The use of the reverse atom transfer radical polymerization （RATRP） to end-functionalize poly（methyl methacrylate） （PMMA） with fullerenes, e.g. C60 and C70 was described in this paper. The Cl-terrninated PMMA was prepared via RATRP with designed molecular weight and narrow molecular weight distributions, and then directly used to react with fullerenes to produce C60（C70） terminated PMMA polymers in the presence of CuBr/Cu/bipy or FeCl2/bipy catalysts. The resultant polymers exhibit good solubility in some common organic solvents, e.g. THF, CHCl3 and toluene, and were well structurally characterized by a variety of physical techniques.     

Fe2O3/YSZ-γ-Al2O3催化剂在甲烷催化燃烧中的催化性能研究

以Fe2O3为活性组分，γ-Al2O3，ZrO2-γ—Al2O3及YSZ—γ—Al2O3(YSZ是用Y2O3稳定ZrO2的催化剂载体)为载体，制备了3种甲烷燃烧催化剂．其中以YSZ—γ—Al2O3为载体的催化剂催化性能最好．XPS检测发现．ZrO2和Y2O3的存在可以增加和稳定Fe2O3的表面浓度，同时也可减弱Fe2O3与γ—Al2O3之间的相互作用．Fe2O3质量分数为10％的Fe2O3／YSZ—γ—Al2O3催化剂具有最佳的催化活性．XRD测试结果表明．该催化剂的活性与Fe2O3在载体上的分散状况有关．     

Biomimetic piezoelectric quartz sensor for caffeine based on a molecularly imprinted polymer

A piezoelectric quartz sensor coated with molecularly imprinted polymer (MIP) for caffeine was developed. The MIP was prepared by co-polymerizing methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) in the presence of azobis(isobutyronitrile) as initiator, caffeine as template molecule, and chloroform as solvent. The MIP suspension in polyvinyl chloride/tetrahydrofuran (6:2:1 w/w/v) solution was spin coated onto the surface of the electrode of a 10 MHz AT-cut quartz crystal. The sensor exhibited a linear relationship between the frequency shift and caffeine concentration in the range of 1×10^–7 mg mL^–1 up to 1x10^–3 mg mL^–1 [correlation coefficient (r)=0.9935] in a stopped flow measurement mode. It has a sensitivity of about 24 Hz/ln(concentration, mg mL^–1). A steady-state response was achieved in less than 10 min. The performance characteristic of the sensor shows a promising and inexpensive alternative method of detecting caffeine. Surface studies were carried out for the reagent phase of the sensor using SEM, AFM, and XPS analysis in order to elucidate the imprinting of the caffeine molecule. The SEM micrograph, AFM image, and XPS spectra confirmed the removal of caffeine by Soxhlet extraction in the imprinting process and the rebinding of caffeine to the MIP sensing layer during measurement.     

Crystallization of binary carboxylic acids characterized with streaming potential measurement

The streaming potential of supersaturated solution of binary carboxylic acids, which have even carbon atoms, was determined to characterize crystallization under different temperatures. The value of the streaming potential was related to the type and solubility of the acids and the starting temperature of crystallization, and was easily influenced by the pressure difference of the liquid or the rate of temperature decline. When the temperature was declined to the point where a crystal nucleus appeared, the streaming potential reached the minimum. Thereafter, as the temperature was sequentially lowered, some minicrystals grew, and the streaming potential presented an ascendant tendency. The higher the starting temperature of the acids saturated solution, the higher is the temperature corresponding to the streaming potential minimum. The less the carbon atoms in the acids and the greater the solubility of the acids are, the higher is the temperature of the streaming potential minimum. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and Characterization of Compositions Based on PbO-MgO-Nb2O5 Using the Sol-Gel Method

Lead Magnesium Niobate, Pb(Mg_1/3Nb_2/3)O₃ (PMN), is an important relaxor ferroelectric material. A significant problem exists, however, in the preparation of this material: it is very difficult to prepare pure phase, without the presence of a pyrochlore impurity phase which degrades the dielectric properties. Depending on the processing conditions, the amount of pyrochlore phase varies.Considering the ternary diagram PbO-MgO-Nb₂O₅, different compositions have been prepared by a simple sol-gel method at room temperature using Pb(CH₃COO)₂, Mg(CH₃COO)₂, Nb(OC₂H₅)₅ as precursors. After the heat treatment, the samples obtained were analyzed by XRD and EPMA with the purpose of studying the compositions formed.From the analysis of these results, it seems to be that the appearance of pyrochlore can be related to the reactivity of the MgO and/or the presence of other phases of the binary system PbO-Nb₂O₅. An excess of Pb and Mg is necessary for compositions to be formed near the PMN. The control of the amount of these two elements is very important because an excess of MgO would lead to rich compositions in Mg as a secondary phase.