Magnetic brillouin zone effect on the resistivity of semimetallic-like fermi surface in USb

To probe the effect of the protein environment on the retinal chromophore of rhodopsin, we performed molecular dynamics simulations using combined quantum mechanics/molecular mechanics (QM/MM). The starting geometry of the protein is based on the 2.6Å X-ray structure of bovine rhodopsin of Okada et al. [T. Okada, et al. Proc. Natl. Acad. Sci. USA 99 5982 (2002)]. The wild-type chromophore of rhodopsin according to our calculations shows a highly twisted conformation around the central region, from C10 to C13, due to non-bonded interaction with the protein pocket. The absolute sense of twist of the C11–C12 and C12–C13 bonds is negative (?19 ± 9°) and positive (170 ± 8°), respectively. The 13-demethyl retinal chromophore, in which the methyl group at the C13 position is removed, is less distorted in this region. The C11–C12 bond is less twisted (?15 ± 10°) and the C12–C13 bond is planar (179 ± 9°) . The flattened geometry of this artificial chromophore is supported by spectroscopic evidence.     

The dynamics of hydrogen adsorption on polycrystalline uranium

The dynamics of dissociative hydrogen adsorption on clean polycrystalline uranium has been studied using temperature programmed desorption and supersonic molecular beams. The initial sticking probability was measured as a function of incident kinetic energy between 3 and 255 meV. Two adsorption channels were observed; a non-activated direct channel was shown to be active over the entire energy range studied and a low energy indirect channel that was characterised by a decrease in sticking probability with increasing beam energy, and an insensitivity to both surface temperature and a range of hydrogen coverages. Together these results suggest the existence of an unaccommodated molecular precursor that has sufficient lifetime and mobility to locate favourable sites and dissociatively adsorb.     

A rapid dissolution procedure to aid initial nuclear forensics investigations of chemically refractory compounds and particles prior to gamma spectrometry

A rapid and effective preparative procedure has been evaluated for the accurate determination of low-energy (40–200 keV) gamma-emitting radionuclides (²¹⁰Pb, ²³⁴Th, ²²⁶Ra, ²³⁵U) in uranium ores and uranium ore concentrates (UOCs) using high-resolution gamma ray spectrometry. The measurement of low-energy gamma photons is complicated in heterogeneous samples containing high-density mineral phases and in such situations activity concentrations will be underestimated. This is because attenuation corrections, calculated based on sample mean density, do not properly correct where dense grains are dispersed within a less dense matrix (analogous to a nugget effect). The current method overcomes these problems using a lithium tetraborate fusion that readily dissolves all components including high-density, self-attenuating minerals/compounds. This is the ideal method for dissolving complex, non-volatile components in soils, rocks, mineral concentrates, and other materials where density reduction is required. Lithium borate fusion avoids the need for theoretical efficiency corrections or measurement of matrix matched calibration standards. The resulting homogeneous quenched glass produced can be quickly dissolved in nitric acid producing low-density solutions that can be counted by gamma spectrometry. The effectiveness of the technique is demonstrated using uranium-bearing Certified Reference Materials and provides accurate activity concentration determinations compared to the underestimated activity concentrations derived from direct measurements of a bulk sample. The procedure offers an effective solution for initial nuclear forensic studies where complex refractory minerals or matrices exist. It is also significantly faster, safer and simpler than alternative approaches.     

Highly efficient,economic, and recyclable glutathione decorated magnetically separable nanocomposite for uranium(VI) adsorption from aqueous solution

A green and environment-friendly magnetically separable nanocomposite, glutathione@magnetite was fabricated sonochemically through the functionalization of Fe₃O₄ by glutathione which was well characterized using Fourier-transform infrared spectroscopy, ultravoilet-visible spectroscopy, scanning electron microscope, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction, thermogravimetric analysis, vibrating sample magnetometer, Brunauer-Emmett-Teller, and high-resolution transmission electron microscope. The parameters affecting adsorption including pH, temperature, contact time, initial adsorbate concentration, and adsorbent amount were optimized by batch experiments. The magnetic glutathione@magnetite was applied for the removal of uranium(VI) in water with maximum adsorption capacity found to be 333.33 mg/g in 120 min at a neutral pH at 25 °C showing high efficiency for U(VI) ions. Furthermore, adsorption results obtained from UV-vis spectroscopy were validated by inductively coupled plasma optical emission spectroscopy. The thermodynamic parameters, viz Gibbs free energy (ΔGº), standard enthalpy change (ΔHº), and standard entropy change (ΔSº) of the process were calculated using the Langmuir constants. The pseudo-second-order kinetics model is seen to be applicable for describing the uptake process using a kinetics test. Moreover, desorption studies reveals that glutathione@magnetite can be used repeatedly, and removal efficiency shows only a small decrease after six cycles. Thus, glutathione@magnetite acts as a potential adsorbent for the removal of U(VI) from the water with great adsorption performance.     

Preparation of carbon coated Fe3O4 nanoparticles for magnetic separation of uranium

Uranium(VI) was removed from aqueous solutions using carbon coated Fe₃O₄ nanoparticles (Fe₃O₄@C). Batch experiments were conducted to study the effects of initial pH, shaking time and temperature on uranium sorption efficiency. It was found that the maximum adsorption capacity of the Fe₃O₄@C toward uranium(VI) was ∼120.20 mg g⁻¹ when the initial uranium(VI) concentration was 100 mg L⁻¹, displaying a high efficiency for the removal of uranium(VI) ions. Kinetics of the uranium(VI) removal is found to follow pseudo-second-order rate equation. In addition, the uranium(VI)-loaded Fe₃O₄@C nanoparticles can be recovered easily from aqueous solution by magnetic separation and regenerated by acid treatment. Present study suggested that magnetic Fe₃O₄@C composite particles can be used as an effective and recyclable adsorbent for the removal of uranium(VI) from aqueous solutions.     

Synthesis of chitosan resin possessing a phenylarsonic acid moiety for collection/concentration of uranium and its determination by ICP-AES

A chitosan resin possessing a phenylarsonic acid moiety (phenylarsonic acid type chitosan resin) was developed for the collection and concentration of trace uranium prior to inductively coupled plasma (ICP) atomic emission spectrometry (AES) measurement. The adsorption behavior of 52 elements was systematically examined by packing it in a minicolumn and measuring the elements in the effluent by ICP mass spectrometry. The resin could adsorb several cationic species by a chelating mechanism, and several oxo acids, such as Ti(IV), V(V), Mo(VI), and W(VI), by an anion-exchange mechanism and/or a chelating mechanism. Especially, U(VI) could be adsorbed almost 100% over a wide pH region from pH 4 to 8. Uranium adsorbed was easily eluted with 1 M nitric acid (10 mL), and the 25-fold preconcentration of uranium was achieved by using a proposed column procedure, which could be applied to the determination of trace uranium in seawater by ICP-AES. The limit of detection was 0.1 ng mL⁻¹ for measurement by ICP-AES coupled with 25-fold column preconcentration.     

Design of two-dimensional biomimetic uranyl optrode and its application to the analysis of natural waters

A two-dimensional biomimetic optrode for the detection and quantification of uranium in natural waters was fabricated. The sensing element was designed by the inclusion of uranyl ion imprinted polymer particles into polymethyl methacrylate followed by casting a thin film on a glass slide without any plasticizer. The ion imprinted polymer material was prepared via covalent immobilization of the newly synthesised ligand 4-vinyl phenylazo-2-naphthol by thermal polymerization. Operational parameters such as pH, response time and the amount of sensing material were optimized. The response characteristics of the imprinted and the corresponding non-imprinted polymer inclusion optrodes of uranium were compared under optimum conditions. The imprinted polymer inclusion optrode responds linearly to uranium in the concentration range 0–1.0 μg mL⁻¹ with a detection limit of 0.18 μg mL⁻¹, which is much better than the solution studies using 4-vinyl phenylazo-2-naphthol (1.5 μg mL⁻¹). Triplicate determinations of 100 μg of uranium(VI) present in 250 mL of solution gave a mean absorbance of 0.018 with a relative standard deviation of 8.33%. The superior sensitivity of imprinted polymer inclusion optrode is exemplified by lower detection limits and broader dynamic range over non-imprinted polymer inclusion optrode. The developed imprinted polymer inclusion optrode was found to give stable and precise response for 3 months and can be used without any loss in sensitivity. The applicability for analysing ground, lake and tap-water samples collected in the vicinity of uranium deposits was successfully demonstrated.     

Determination of uranium, iron, copper, and nickel from ore samples by MEKC using N,N'-ethylene bis(salicylaldimine) as complexing reagent

An analytical procedure has been developed for the separation of dioxouranium(VI), iron(III), copper(II), nickel(II), cobalt(II), cobalt(III), palladium(II), and thorium(IV) by MEKC using N,N'-ethylene bis(salicylaldimine) (H(2)SA(2)en) as a complexing reagent with total runtime <4.5 min. SDS was used as micellar medium at pH 8 with sodium tetraborate buffer (0.1 M). An uncoated fused-silica capillary with an effective length of 50 cm x 75 microm id was used with an applied voltage of 30 kV with photodiode array detection at 231 nm. Linear calibrations were obtained within 0.111-1000 microg/mL of each element with LODs within 37-325 ng/mL. The developed method was tested for analysis of uranium ore samples indicating its presence within 103-1789 microg/g with RSD within 0.79-1.87%. Likewise copper, nickel, and iron in their combined matrix were also simultaneously determined with RSD 0.4-1.6% (n = 6).     

Syntheses, structures, and magnetic and optical properties of the compounds [Hg3Te2][UCl6] and [Hg4As2][UCl6]

Two new quaternary salts, [Hg₃Te₂][UCl₆] and [Hg₄As₂][UCl₆], have been synthesized and their structures determined by single-crystal X-ray diffraction analysis. [Hg₃Te₂][UCl₆] is the product of a reaction involving UCl₄, HgCl₂, and HgTe at 873 K. The compound crystallizes in space group P2₁/c of the monoclinic system. [Hg₄As₂][UCl₆] results from the reaction of U, Hg₂Cl₂, and As at 788 K. It crystallizes in space group Pbca of the orthorhombic system. [Hg₃Te₂][UCl₆] has a two-dimensional framework of layers, whereas [Hg₄As₂][UCl₆] has a three-dimensional framework of layers interconnected by Hg atoms linearly bonded to As atoms. Both framework structures contain discrete [UCl₆]²⁻ anions between the layers. [Hg₃Te₂][UCl₆] exhibits temperature-independent paramagnetism. The optical absorption spectra of these compounds display f-f transitions.     

On-line extraction and determination of uranium in aqueous samples using multi-walled carbon nanotubes-coated cellulose acetate membrane

In this work, multi-walled carbon nanotubes (MWCNTs)-coated cellulose acetate membrane was used for on-line extraction and pre-concentration of uranium from aqueous samples prior to inductively coupled plasma optical emission spectrometry (ICP-OES) determination. Sample solutions containing the U(VI)-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP) complex were passed through the membrane. The adsorbed analyte was subsequently eluted from the membrane with acid, which was directly introduced into the ICP-OES nebuliser. The main variables affecting the pre-concentration and determination steps of uranium were studied and optimised. Under the optimised conditions, the enrichment factor of 150 and the detection limit of 0.16 μg L^–1 were obtained. This method was successfully used for determination of uranium in environmental water samples.